UC2846NG4
Texas InstrumentsExtended
-40℃~+85℃@(TA) 2 500kHz 6.95V~40V Boost、Flyback、Push-Pull、Full-Bridge、Half-Bridge External Protection latch、Cycle-by-cycle current limiting、Adjustable current limiting Yes PDIP-16 DC-DC Converters ROHS
- Part id
- ti/UC2846NG4
- Category
- DC DC Controllers
- Package
- PDIP-16
- Pins
- 2
- In stock
- 0 at JLCPCB (C1530513)
Overview
The UC2846NG4 is a DC DC Controller made by Texas Instruments in a PDIP-16 package with 16 pins. -40℃~+85℃@(TA) 2 500kHz 6.95V~40V Boost、Flyback、Push-Pull、Full-Bridge、Half-Bridge External Protection latch、Cycle-by-cycle current limiting、Adjustable current limiting Yes PDIP-16 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:UC2846DWG4, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1530513).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | C/S SS | Unspecified |
| 2 | VREF | Unspecified |
| 3 | C/S– | Unspecified |
| 4 | C/S+ | Unspecified |
| 5 | E/A+ | Unspecified |
| 6 | E/A– | Unspecified |
| 7 | COMP | Unspecified |
| 8 | CT | Unspecified |
| 9 | RT | Unspecified |
| 10 | Sync | Unspecified |
| 11 | A Out | Unspecified |
| 12 | GND | Unspecified |
| 13 | VC | Unspecified |
| 14 | B Out | Unspecified |
| 15 | VIN | Unspecified |
| 16 | Shutdown | Unspecified |
Parts like it
8UCC3806N
PDIP-160℃~+70℃@(TA) 47kHz 50% 8V~14.5V Boost、Flyback、Buck、Forward PDIP-16 AC-DC Controllers and Regulators ROHSTexas InstrumentsDC-DC ControllersLM3524DN
PDIP-160℃~+125℃@(TJ) 1 8V~40V Boost、Buck External No Overcurrent Protection、Frequency synchronization、Built-in LDO regulator PDIP-16 DC-DC ConvertersTexas InstrumentsDC-DC ControllersUC2525ANG4
PDIP-16-25℃~+85℃@(TA) 2 400kHz 8V~35V Cycle-by-cycle current limiting、Frequency synchronization External Yes PDIP-16 DC-DC Converters ROHSTexas InstrumentsDC-DC ControllersUC28025NG4
PDIP-16-40℃~+105℃@(TA) 2 460kHz 9V~30V External Overcurrent Protection、Cycle-by-cycle current limiting、Adjustable current limiting Push-Pull Yes PDIP-16 DC-DC Converters ROHSTexas InstrumentsDC-DC ControllersUC2823AN
PDIP-16-40℃~+85℃@(TA) 1 1MHz 8.4V~22V No Overcurrent Protection、Protection latch、Cycle-by-cycle current limiting、Frequency synchronization PDIP-16 AC-DC Controllers and Regulators ROHSTexas InstrumentsDC-DC ControllersUC2825ANG4
PDIP-16-40℃~+85℃@(TA) 1MHz 2 8.4V~22V No Overcurrent Protection、Protection latch、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization PDIP-16 AC-DC Controllers and Regulators ROHSTexas InstrumentsDC-DC ControllersUC2825NG4
PDIP-16-40℃~+85℃@(TA) 1.5A 2 460kHz 8.4V~30V Adjustable External No Overcurrent Protection、Cycle-by-cycle current limiting PDIP-16 DC-DC Converters ROHSTexas InstrumentsDC-DC ControllersUC3524ANG4
PDIP-160℃~+70℃@(TA) 2 500kHz 8V~40V No Overcurrent Protection、Frequency synchronization PDIP-16 AC-DC Controllers and Regulators ROHSTexas InstrumentsDC-DC Controllers
Questions
Is there a KiCad symbol and footprint for the UC2846NG4?
Yes. The symbol is EasyEDA_Cloud:UC2846DWG4 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the UC2846NG4?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the UC2846NG4 datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the UC2846NG4?
JLCPCB lists it as part C1530513, with 0 in stock; the sellers' links on this page open their listings.
What can replace the UC2846NG4?
Parts like it in the library: the UCC3806N by Texas Instruments, the LM3524DN by Texas Instruments, the UC2525ANG4 by Texas Instruments and the UC28025NG4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.