Skip to the content
15

TXS0104EBQAR

Texas InstrumentsExtended

-40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Tri-State WQFN-14-EP(2.5x3) Translators, Level Shifters ROHS

Part id
ti/TXS0104EBQAR
Category
Translators, Level Shifters
Package
WQFN-14-EP(2.5x3)
Pins
15
In stock
0 at JLCPCB (C30705828)
Used on
1 open-source board

Overview

The TXS0104EBQAR is a translators, Level Shifter made by Texas Instruments in a WQFN-14-EP(2.5x3) package with 15 pins. -40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Tri-State WQFN-14-EP(2.5x3) Translators, Level Shifters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TXS0104EBQAR, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-14_L3.0-W2.5-P0.50-TL-EP_TXS0104EQWBQARQ1, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C30705828). 1 open-source board in 1 repository on GitHub use it.

Symbol

1VCCA2A13A24A35A46NC7GND8OE9NC10B411B312B213B114VCCB15EP
EasyEDA_Cloud:TXS0104EBQARFrom EasyEDA

Footprint

15
EasyEDA_Cloud:WQFN-14_L3.0-W2.5-P0.50-TL-EP_TXS0104EQWBQARQ1From EasyEDA

Pinout

15
The pins of the TXS0104EBQAR
PinNameType
1VCCAUnspecified
2A1Unspecified
3A2Unspecified
4A3Unspecified
5A4Unspecified
6NCUnspecified
7GNDUnspecified
8OEUnspecified
9NCUnspecified
10B4Unspecified
11B3Unspecified
12B2Unspecified
13B1Unspecified
14VCCBUnspecified
15EPUnspecified

Open-source boards using it

1
  • 2 layers8.5 × 10.8 mmDaughterboardv4, the printed circuit board in 3D

    Daughterboardv4

    kzsol/AIM2_daughterboard

    This Repository shares the design of an add-on board for AIM-2

    8 parts2

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TXS0104EBQAR?

Yes. The symbol is EasyEDA_Cloud:TXS0104EBQAR and the footprint EasyEDA_Cloud:WQFN-14_L3.0-W2.5-P0.50-TL-EP_TXS0104EQWBQARQ1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TXS0104EBQAR?

WQFN-14-EP(2.5x3), with 15 pins. Its footprint is drawn on this page.

Where is the TXS0104EBQAR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TXS0104EBQAR?

JLCPCB lists it as part C30705828, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TXS0104EBQAR?

Parts like it in the library: the TXS0104VQBQARQ1 by Texas Instruments, the TXB0104QWBQARQ1 by Texas Instruments and the TXS0104EQWBQARQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TXS0104EBQAR?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.