
HighSpeedUSBHub
Acidicts/HighSpeedUSBHub
I looked at an old USB 2.0 hub I made and though what if I could make a faster one? So I did(whether it works or not is another story).
Texas InstrumentsExtended
-40℃~+85℃ 0.99V~1.26V、3V~3.6V 33mA 4 778mA Hub I2C、SMBus USB 2.0、USB 3.0 QFN-64-EP(9x9) USB HUB Controllers ROHS
The TUSB8041IRGCR is a USB Converter made by Texas Instruments in a QFN-64-EP(9x9) package with 65 pins. -40℃~+85℃ 0.99V~1.26V、3V~3.6V 33mA 4 778mA Hub I2C、SMBus USB 2.0、USB 3.0 QFN-64-EP(9x9) USB HUB Controllers ROHS.
PCBKit's library has its KiCad symbol (Interface_USB:TUSB8041, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm, from KiCad's library), ready for a KiCad board. 2,426 are in stock at JLCPCB (part C544686). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | USB_DP_DN1 | Input/output |
| 2 | USB_DM_DN1 | Input/output |
| 3 | USB_SSTXP_DN1 | Output |
| 4 | USB_SSTXM_DN1 | Output |
| 5 | VDD | Power in |
| 6 | USB_SSRXP_DN1 | Input |
| 7 | USB_SSRXM_DN1 | Input |
| 8 | VDD | Power in |
| 9 | USB_DP_DN2 | Input/output |
| 10 | USB_DM_DN2 | Input/output |
| 11 | USB_SSTXP_DN2 | Output |
| 12 | USB_SSTXM_DN2 | Output |
| 13 | VDD | Power in |
| 14 | USB_SSRXP_DN2 | Input |
| 15 | USB_SSRXM_DN2 | Input |
| 16 | VDD33 | Power in |
| 17 | USB_DP_DN3 | Input/output |
| 18 | USB_DM_DN3 | Input/output |
| 19 | USB_SSTXP_DN3 | Output |
| 20 | USB_SSTXM_DN3 | Output |
| 21 | VDD | Power in |
| 22 | USB_SSRXP_DN3 | Input |
| 23 | USB_SSRXM_DN3 | Input |
| 24 | USB_DP_DN4 | Input/output |
| 25 | USB_DM_DN4 | Input/output |
| 26 | USB_SSTXP_DN4 | Output |
| 27 | USB_SSTXM_DN4 | Output |
| 28 | VDD | Power in |
| 29 | USB_SSRXP_DN4 | Input |
| 30 | USB_SSRXM_DN4 | Input |
| 31 | VDD | Power in |
| 32 | PWRCTL4/BATEN4 | Input/output |
| 33 | PWRCTL3/BATEN3 | Input/output |
| 34 | VDD33 | Power in |
| 35 | PWRCTL2/BATEN2 | Input/output |
| 36 | PWRCTL1/BATEN1 | Input/output |
| 37 | SDA/SMBDAT | Input/output |
| 38 | SCL/SMBCLK | Input/output |
| 39 | SMBUSz/SS_SUSPEND | Input/output |
| 40 | FULLPWRMGMTz/SMBA1/SS_UP | Input/output |
| 41 | PWRCTL_POL | Input/output |
| 42 | GANGED/SMBA2/HS_UP | Input/output |
| 43 | OVERCUR4z | Input |
| 44 | OVERCUR3z | Input |
| 45 | AUTOENz/HS_SUSPEND | Input/output |
| 46 | OVERCUR1z | Input |
| 47 | OVERCUR2z | Input |
| 48 | USB_VBUS | Input |
| 49 | TEST | Input |
| 50 | GRSTz | Input |
| 51 | VDD | Power in |
| 52 | VDD33 | Power in |
| 53 | USB_DP_UP | Input/output |
| 54 | USB_DM_UP | Input/output |
| 55 | USB_SSTXP_UP | Output |
| 56 | USB_SSTXM_UP | Output |
| 57 | VDD | Power in |
| 58 | USB_SSRXP_UP | Input |
| 59 | USB_SSRXM_UP | Input |
| 60 | NC | Not connected |
| 61 | XO | Output |
| 62 | XI | Input |
| 63 | VDD33 | Power in |
| 64 | USB_R1 | Input |
| 65 | VSS | Power in |

Acidicts/HighSpeedUSBHub
I looked at an old USB 2.0 hub I made and though what if I could make a faster one? So I did(whether it works or not is another story).
Yes. The symbol is Interface_USB:TUSB8041 and the footprint Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-64-EP(9x9), with 65 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C544686, with 2,426 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the TUSB8041RGCR by Texas Instruments, the TUSB8041ARGCR by Texas Instruments and the TUSB8041ARGCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.