Skip to the content
123456

TS5A3159DBV

Texas InstrumentsExtended

-40℃~+85℃ 1 1.65V~5.5V 100MHz 15ns 1Ω 20ns 2:1 84pF SOT-23-6 Analog Switches, Multiplexers ROHS

Part id
ti/TS5A3159DBV
Category
Analog Switches, Multiplexers
Package
SOT-23-6
Pins
6
In stock
108 at JLCPCB (C92485)
Used on
4 open-source boards

Overview

The TS5A3159DBV is an analog Switches, Multiplexer made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1 1.65V~5.5V 100MHz 15ns 1Ω 20ns 2:1 84pF SOT-23-6 Analog Switches, Multiplexers ROHS.

PCBKit's library has its KiCad symbol (Analog_Switch:TS5A3159DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 108 are in stock at JLCPCB (part C92485). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1346
Analog_Switch:TS5A3159DBVFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

9
Supply, least
1.65 V · V+, recommended operating min · p. 4
Supply, most
5.5 V · V+, recommended operating max · p. 4
Supply, absolute maximum
6.5 V · V+, absolute max · p. 3
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Junction, hottest
150 °C · Junction temperature max · p. 3
Takes working
100 nA · V+, positive supply current max, switch ON or OFF, VIN = V+ or GND, V+ = 3.6 V · p. 6
A pin gives at most
200 mA · Analog switch port ON-state current absolute max magnitude, VNO and VCOM = 0 to V+ · p. 3
Junction to air (DBV (SOT-23))
165 K/W · Junction-to-ambient thermal resistance · p. 4

What it is and has

8
Switch topology
SPDT analog switch · p. 1
ON-state resistance
1 Ω · p. 1
Control inputs
5-V tolerant · p. 1
Charge injection
Low · p. 1
ON-resistance matching
Excellent · p. 1
Total harmonic distortion
Low · p. 1
Supply operation
1.65 V to 5.5 V, single supply · p. 1
Switch configuration
SPDT analog switch · p. 1

Around it

1
cap 0.1-μF
between V+ and GND; Single-supply bypass capacitor; install as close to the power terminal as possible. · p. 18

Specifications

165
ParameterConditionsAs printedPage
Supply voltage V+Over operating free-air temperature range; voltages with respect to groundmin -0.5 · max 6.5 V3
Analog voltage VNO, VCOMMaximum V+ + 0.5 V, limited to 5.5 V; clamp-current exceptions applymin -0.5 V3
Analog port diode current II/OKVNO, VCOM < 0 or VNO, VCOM > V+; ±50 mAmax 50 mA3
ON-state switch current INO, ICOMVNO, VCOM = 0 to V+; ±200 mAmax 200 mA3
ON-state peak switch current INO, ICOM±400 mA; pulse at 1-ms duration < 10% duty cyclemax 400 mA3
Digital input voltage VINVoltages with respect to ground; clamp-current exceptions applymin -0.5 · max 6.5 V3
Digital input clamp current IIKVIN < 0max -50 mA3
Continuous current through V+ or GND±100 mAmax 100 mA3
Junction temperature Tjmax 150 °C3
Storage temperature Tstgmin -65 · max 150 °C3
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V4
Switch input/output voltage VI/OOver operating free-air temperature range; maximum V+min 0 V4
Supply voltage V+Over operating free-air temperature rangemin 1.65 · max 5.5 V4
Control input voltage VIOver operating free-air temperature rangemin 0 · max 5.5 V4
Operating temperature TAFree-air temperaturemin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 6 pinstyp 165 °C/W4
Analog signal range VCOM, VNO, VNCV+ = 4.5 V to 5.5 V; TA = –40°C to 85°C; maximum V+min 0 V4
Peak ON-state resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –30 mA; switch ON; full temperature range; V+ = 4.5 Vmax 1.5 Ω4
ON-state resistance ronVNO or VNC = 2.5 V; ICOM = –30 mA; switch ON; TA = 25°C; V+ = 4.5 Vtyp 0.75 · max 1.1 Ω4
ON-state resistance ronVNO or VNC = 2.5 V; ICOM = –30 mA; switch ON; full temperature range; V+ = 4.5 Vmax 1.1 Ω4
ON-state resistance match between channels ΔronVNO or VNC = 2.5 V; ICOM = –30 mA; switch ON; TA = 25°C; V+ = 4.5 Vtyp 0.1 Ω4
ON-state resistance flatness ron(flat)0 ≤ VNO or VNC ≤ V+; ICOM = –30 mA; switch ON; TA = 25°C; V+ = 4.5 Vtyp 0.233 Ω4
ON-state resistance flatness ron(flat)VNO or VNC = 1 V, 1.5 V, 2.5 V; ICOM = –30 mA; switch ON; TA = 25°C; V+ = 4.5 Vtyp 0.15 Ω4
NC, NO Off leakage current INC(OFF), INO(OFF)VNC or VNO = 4.5 V; VCOM = 0 V; switch OFF; TA = 25°C; V+ = 5.5 Vmin -2 · typ 0.2 · max 2 nA4
NC, NO Off leakage current INC(OFF), INO(OFF)VNC or VNO = 4.5 V; VCOM = 0 V; switch OFF; full temperature range; V+ = 5.5 Vmin -20 · max 20 nA4
NC, NO On leakage current INC(ON), INO(ON)VNC or VNO = 4.5 V; VCOM = Open; switch ON; TA = 25°C; V+ = 5.5 Vmin -4 · typ 2.8 · max 4 nA4
NC, NO On leakage current INC(ON), INO(ON)VNC or VNO = 4.5 V; VCOM = Open; switch ON; full temperature range; V+ = 5.5 Vmin -40 · max 40 nA4
COM On leakage current ICOM(ON)VNC or VNO = 4.5 V or Open; VCOM = 4.5 V; switch ON; TA = 25°C; V+ = 5.5 Vmin -4 · typ 0.47 · max 4 nA4
COM On leakage current ICOM(ON)VNC or VNO = 4.5 V or Open; VCOM = 4.5 V; switch ON; full temperature range; V+ = 5.5 Vmin -40 · max 40 nA4
Input logic high VIHFull temperature range; V+ = 4.5 V to 5.5 Vmin 2.4 · max 5.5 V4
Input logic low VILFull temperature range; V+ = 4.5 V to 5.5 Vmin 0 · max 0.8 V4
Input leakage current IIH, IILVIN = 5.5 V or 0; full temperature range; V+ = 5.5 Vmin -1 · max 1 uA4
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 4.5 V to 5.5 Vtyp 20 · max 35 ns5
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 4.5 V to 5.5 Vmax 40 ns5
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 4.5 V to 5.5 Vtyp 15 · max 20 ns5
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 4.5 V to 5.5 Vmax 35 ns5
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 4.5 V to 5.5 Vmin 1 · typ 12 · max 14.5 ns5
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 4.5 V to 5.5 Vmin 1 ns5
Charge injection QCCL = 1 nF; VGEN = 0 V; TA = 25°C; V+ = 5 Vtyp 36 pC5
NC, NO OFF capacitance CNC(OFF), CNO(OFF)VNC or VNO = V+ or GND; switch OFF; TA = 25°C; V+ = 5 Vtyp 23 pF5
NC, NO ON capacitance CNC(ON), CNO(ON)VNC or VNO = V+ or GND; switch ON; TA = 25°C; V+ = 5 Vtyp 84 pF5
COM ON capacitance CCOM(ON)VCOM = V+ or GND; switch ON; TA = 25°C; V+ = 5 Vtyp 84 pF5
Digital input capacitance CINVIN = V+ or GND; TA = 25°C; V+ = 5 Vtyp 2.1 pF5
Bandwidth BWRL = 50 Ω; switch ON; TA = 25°C; V+ = 5 Vtyp 100 MHz5
OFF isolation OISORL = 50 Ω; f = 1 MHz; switch OFF; TA = 25°C; V+ = 5 Vtyp -65 dB5
Crosstalk XTALKRL = 50 Ω; f = 1 MHz; switch ON; TA = 25°C; V+ = 5 Vtyp -65 dB5
Total harmonic distortion THDRL = 600 Ω; CL = 50 pF; f = 600 Hz to 20 kHz; TA = 25°C; V+ = 5 Vtyp 0.01 %5
Positive supply current I+VIN = V+ or GND; switch ON or OFF; full temperature range; V+ = 5.5 Vmax 0.1 uA5
Analog signal range VCOM, VNO, VNCV+ = 3 V to 3.6 V; TA = –40°C to 85°C; maximum V+min 0 V5
Peak ON-state resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –24 mA; switch ON; TA = 25°C; V+ = 3 Vtyp 1.35 · max 2.1 Ω5
Peak ON-state resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –24 mA; switch ON; full temperature range; V+ = 3 Vmax 2.1 Ω5
ON-state resistance ronVNO or VNC = 2 V; ICOM = –24 mA; switch ON; TA = 25°C; V+ = 3 Vtyp 1.15 · max 1.5 Ω5
ON-state resistance ronVNO or VNC = 2 V; ICOM = –24 mA; switch ON; full temperature range; V+ = 3 Vmax 1.5 Ω5
ON-state resistance match between channels ΔronVNO or VNC = 2 V, 0.8 V; ICOM = –24 mA; switch ON; TA = 25°C; V+ = 3 Vtyp 0.11 Ω5
ON-state resistance flatness ron(flat)0 ≤ VNO or VNC ≤ V+; ICOM = –24 mA; switch ON; TA = 25°C; V+ = 3 Vtyp 0.225 Ω5
ON-state resistance flatness ron(flat)VNO or VNC = 2 V, 0.8 V; ICOM = –24 mA; switch ON; TA = 25°C; V+ = 3 Vtyp 0.25 Ω5
NC, NO Off leakage current INC(OFF), INO(OFF)VNC or VNO = 3 V; VCOM = 0; switch OFF; TA = 25°C; V+ = 3.6 Vtyp 0.2 nA6
NC, NO On leakage current INC(ON), INO(ON)VNC or VNO = 3 V; VCOM = Open; switch ON; TA = 25°C; V+ = 3.6 Vtyp 2.8 nA6
COM On leakage current ICOM(ON)VNC or VNO = 3 V or Open; VCOM = 3 V; switch ON; TA = 25°C; V+ = 3.6 Vtyp 0.47 nA6
Input logic high VIHFull temperature range; V+ = 3 V to 3.6 Vmin 2 · max 5.5 V6
Input logic low VILFull temperature range; V+ = 3 V to 3.6 Vmin 0 · max 0.6 V6
Input leakage current IIH, IILVIN = 5.5 V or 0; full temperature range; V+ = 3.6 Vmin -1 · max 1 uA6
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 3 V to 3.6 Vtyp 30 · max 40 ns6
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 3 V to 3.6 Vmax 55 ns6
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 3 V to 3.6 Vtyp 20 · max 25 ns6
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 3 V to 3.6 Vmax 40 ns6
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 3 V to 3.6 Vmin 1 · typ 21 · max 29 ns6
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 3 V to 3.6 Vmin 1 ns6
Charge injection QCCL = 1 nF; VGEN = 0 V; TA = 25°C; V+ = 3.3 Vtyp 20 pC6
NC, NO OFF capacitance CNC(OFF), CNO(OFF)VNC or VNO = V+ or GND; switch OFF; TA = 25°C; V+ = 3.3 Vtyp 23 pF6
NC, NO ON capacitance CNC(ON), CNO(ON)VNC or VNO = V+ or GND; switch ON; TA = 25°C; V+ = 3.3 Vtyp 84 pF6
COM ON capacitance CCOM(ON)VCOM = V+ or GND; switch ON; TA = 25°C; V+ = 3.3 Vtyp 84 pF6
Digital input capacitance CINVIN = V+ or GND; TA = 25°C; V+ = 3.3 Vtyp 2.1 pF6
Bandwidth BWRL = 50 Ω; switch ON; TA = 25°C; V+ = 3.3 Vtyp 100 MHz6
OFF isolation OISORL = 50 Ω; f = 1 MHz; switch OFF; TA = 25°C; V+ = 3.3 Vtyp -65 dB6
Crosstalk XTALKRL = 50 Ω; f = 1 MHz; switch ON; TA = 25°C; V+ = 3.3 Vtyp -65 dB6
Total harmonic distortion THDRL = 600 Ω; CL = 50 pF; f = 600 Hz to 20 kHz; TA = 25°C; V+ = 3.3 Vtyp 0.015 %6
Positive supply current I+VIN = V+ or GND; switch ON or OFF; full temperature range; V+ = 3.6 Vmax 0.1 uA6
Analog signal range VCOM, VNO, VNCV+ = 2.3 V to 2.7 V; TA = –40°C to 85°C; maximum V+min 0 V6
Peak ON-state resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –8 mA; switch ON; TA = 25°C; V+ = 2.5 Vtyp 1.7 · max 2.7 Ω7
Peak ON-state resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –8 mA; switch ON; full temperature range; V+ = 2.5 Vmax 2.7 Ω7
ON-state resistance ronVNO or VNC = 1.8 V; ICOM = –8 mA; switch ON; TA = 25°C; V+ = 2.5 Vtyp 1.45 · max 2 Ω7
ON-state resistance ronVNO or VNC = 1.8 V; ICOM = –8 mA; switch ON; full temperature range; V+ = 2.5 Vmax 2 Ω7
ON-state resistance match between channels ΔronVNO or VNC = 0.8 V, 1.8 V; ICOM = –8 mA; switch ON; TA = 25°C; V+ = 2.5 Vtyp 0.7 Ω7
ON-state resistance flatness ron(flat)0 ≤ VNO or VNC ≤ V+; ICOM = –8 mA; switch ON; TA = 25°C; V+ = 2.5 Vtyp 0.5 Ω7
ON-state resistance flatness ron(flat)VNO or VNC = 0.8 V, 1.8 V; ICOM = –8 mA; switch ON; TA = 25°C; V+ = 2.5 Vtyp 0.45 Ω7
NC, NO Off leakage current INC(OFF), INO(OFF)VNC or VNO = 2.3 V; VCOM = 0; switch OFF; TA = 25°C; V+ = 2.7 Vtyp 0.2 nA7
NC, NO On leakage current INC(ON), INO(ON)VNC or VNO = 2.3 V; VCOM = Open; switch ON; TA = 25°C; V+ = 2.7 Vtyp 2.8 nA7
COM On leakage current ICOM(ON)VNC or VNO = 2.3 V or Open; VCOM = 2.3 V; switch ON; TA = 25°C; V+ = 2.7 Vtyp 0.47 nA7
Input logic high VIHFull temperature range; V+ = 2.3 V to 2.7 Vmin 1.8 · max 5.5 V7
Input logic low VILFull temperature range; V+ = 2.3 V to 2.7 Vmin 0 · max 0.6 V7
Input leakage current IIH, IILVIN = 5.5 V or 0; full temperature range; V+ = 2.7 Vmin -1 · max 1 uA7
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 2.3 V to 2.7 Vtyp 40 · max 55 ns7
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 2.3 V to 2.7 Vmax 70 ns7
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 2.3 V to 2.7 Vtyp 30 · max 40 ns7
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 2.3 V to 2.7 Vmax 55 ns7
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 2.3 V to 2.7 Vmin 1 · typ 33 · max 39 ns7
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 2.3 V to 2.7 Vmin 1 ns7
Charge injection QCCL = 1 nF; VGEN = 0 V; TA = 25°C; V+ = 2.5 Vtyp 13 pC7
NC, NO OFF capacitance CNC(OFF), CNO(OFF)VNC or VNO = V+ or GND; switch OFF; TA = 25°C; V+ = 2.5 Vtyp 23 pF7
NC, NO ON capacitance CNC(ON), CNO(ON)VNC or VNO = V+ or GND; switch ON; TA = 25°C; V+ = 2.5 Vtyp 84 pF7
COM ON capacitance CCOM(ON)VCOM = V+ or GND; switch ON; TA = 25°C; V+ = 2.5 Vtyp 84 pF7
Digital input capacitance CINVIN = V+ or GND; TA = 25°C; V+ = 2.5 Vtyp 2.1 pF7
Bandwidth BWRL = 50 Ω; switch ON; TA = 25°C; V+ = 2.5 Vtyp 100 MHz7
OFF isolation OISORL = 50 Ω; f = 1 MHz; switch OFF; TA = 25°C; V+ = 2.5 Vtyp -64 dB7
Crosstalk XTALKRL = 50 Ω; f = 1 MHz; switch ON; TA = 25°C; V+ = 2.5 Vtyp -64 dB7
Total harmonic distortion THDRL = 600 Ω; CL = 50 pF; f = 600 Hz to 20 kHz; TA = 25°C; V+ = 2.5 Vtyp 0.025 %7
Positive supply current I+VIN = V+ or GND; switch ON or OFF; full temperature range; V+ = 2.7 Vmax 0.1 uA7
Analog signal VCOM, VNO, VNCV+ = 1.65 V to 1.95 V; TA = –40°C to 85°C; maximum V+min 0 V8
Peak ON-resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –2 mA; switch ON; TA = 25°C; V+ = 1.8 Vtyp 4 · max 4.9 Ω8
Peak ON-resistance rpeak0 ≤ VNO or VNC ≤ V+; ICOM = –2 mA; switch ON; full temperature range; V+ = 1.8 Vmax 4.9 Ω8
ON-state resistance ronVNO or VNC = 1.5 V; ICOM = –2 mA; switch ON; TA = 25°C; V+ = 1.8 Vtyp 1.7 · max 3.2 Ω8
ON-state resistance ronVNO or VNC = 1.5 V; ICOM = –2 mA; switch ON; full temperature range; V+ = 1.8 Vmax 3.2 Ω8
ON-state resistance match between channels ΔronVNO or VNC = 0.6 V, 1.5 V; ICOM = –2 mA; switch ON; TA = 25°C; V+ = 1.8 Vtyp 0.7 Ω8
ON-state resistance match between channels ΔronVNO or VNC = 0.6 V, 1.5 V; ICOM = –2 mA; switch ON; full temperature range; V+ = 1.8 Vtyp 0.7 Ω8
ON-state resistance flatness ron(flat)0 ≤ VNO or VNC ≤ V+; ICOM = –2 mA; switch ON; TA = 25°C; V+ = 1.8 Vtyp 1.85 Ω8
ON-state resistance flatness ron(flat)0 ≤ VNO or VNC ≤ V+; ICOM = –2 mA; switch ON; full temperature range; V+ = 1.8 Vtyp 1.85 Ω8
ON-state resistance flatness ron(flat)VNO or VNC = 0.6 V, 1.5 V; ICOM = –2 mA; switch ON; TA = 25°C; V+ = 1.8 Vtyp 0.9 Ω8
ON-state resistance flatness ron(flat)VNO or VNC = 0.6 V, 1.5 V; ICOM = –2 mA; switch ON; full temperature range; V+ = 1.8 Vtyp 0.9 Ω8
NC, NO OFF leakage current INC(OFF), INO(OFF)VNC or VNO = 1.65 V; VCOM = 0; switch OFF; TA = 25°C; V+ = 1.95 Vtyp 0.2 nA8
NC, NO ON leakage current INC(ON), INO(ON)VNC or VNO = 1.65 V; VCOM = Open; switch ON; TA = 25°C; V+ = 1.95 Vtyp 2.8 nA8
COM ON leakage current ICOM(ON)VNC or VNO = 1.65 V or open; VCOM = 1.65 V; switch ON; TA = 25°C; V+ = 1.95 Vtyp 0.47 nA8
Input logic high VIHFull temperature range; V+ = 1.65 V to 1.95 Vmin 1.5 · max 5.5 V8
Input logic low VILFull temperature range; V+ = 1.65 V to 1.95 Vmin 0 · max 0.6 V8
Input leakage current IIH, IILVIN = 5.5 V or 0; full temperature range; V+ = 1.95 Vmin -1 · max 1 uA8
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 1.65 V to 1.95 Vtyp 65 · max 70 ns8
Turnon time tONVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 1.65 V to 1.95 Vmax 95 ns8
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 1.65 V to 1.95 Vtyp 40 · max 55 ns8
Turnoff time tOFFVCOM = V+; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 1.65 V to 1.95 Vmax 70 ns8
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; TA = 25°C; V+ = 1.65 V to 1.95 Vmin 1 · typ 60 · max 72 ns8
Break-before-make time tBBMVNC = VNO = V+ / 2; RL = 50 Ω; CL = 35 pF; full temperature range; V+ = 1.65 V to 1.95 Vmin 0.5 ns8
Charge injection QCCL = 1 nF; VGEN = 0 V; TA = 25°C; V+ = 1.8 Vtyp 13 pC8
NC, NO OFF capacitance CNC(OFF), CNO(OFF)VNC or VNO = V+ or GND; switch OFF; TA = 25°C; V+ = 1.8 Vtyp 23 pF8
NC, NO ON capacitance CNC(ON), CNO(ON)VNC or VNO = V+ or GND; switch ON; TA = 25°C; V+ = 1.8 Vtyp 84 pF8
COM ON capacitance CCOM(ON)VCOM = V+ or GND; switch ON; TA = 25°C; V+ = 1.8 Vtyp 84 pF8
Digital input capacitance CINVIN = V+ or GND; TA = 25°C; V+ = 1.8 Vtyp 2.1 pF8
Bandwidth BWRL = 50 Ω; switch ON; TA = 25°C; V+ = 5.5 V as printedtyp 100 MHz8
OFF isolation OISORL = 50 Ω; f = 1 MHz; switch OFF; TA = 25°C; V+ = 1.8 Vtyp -63 dB8
Crosstalk XTALKRL = 50 Ω; f = 1 MHz; switch ON; TA = 25°C; V+ = 1.8 Vtyp -63 dB8
Positive supply current I+VIN = V+ or GND, Switch ON or OFF, TA = Full, V+ = 1.8 Vmax 0.1 uA9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 4.5 V to 5.5 Vtyp 20 · max 35 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 4.5 V to 5.5 Vmax 40 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 4.5 V to 5.5 Vtyp 15 · max 20 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 4.5 V to 5.5 Vmax 35 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = 25°C, V+ = 4.5 V to 5.5 Vmin 1 · typ 12 · max 14.5 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = Full, V+ = 4.5 V to 5.5 Vmin 1 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 3 V to 3.6 Vtyp 30 · max 40 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 3 V to 3.6 Vmax 55 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 3 V to 3.6 Vtyp 20 · max 25 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 3 V to 3.6 Vmax 40 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = 25°C, V+ = 3 V to 3.6 Vmin 1 · typ 21 · max 29 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = Full, V+ = 3 V to 3.6 Vmin 1 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 2.3 V to 2.7 Vtyp 40 · max 55 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 2.3 V to 2.7 Vmax 70 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 2.3 V to 2.7 Vtyp 30 · max 40 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 2.3 V to 2.7 Vmax 55 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = 25°C, V+ = 2.3 V to 2.7 Vmin 1 · typ 33 · max 39 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = Full, V+ = 2.3 V to 2.7 Vmin 1 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 1.65 V to 1.95 Vtyp 65 · max 70 ns9
Turnon time tONVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 1.65 V to 1.95 Vmax 95 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = 25°C, V+ = 1.65 V to 1.95 Vtyp 40 · max 55 ns9
Turnoff time tOFFVCOM = V+, RL = 50 Ω, CL = 35 pF, see Figure 14, TA = Full, V+ = 1.65 V to 1.95 Vmax 70 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = 25°C, V+ = 1.65 V to 1.95 Vmin 1 · typ 60 · max 72 ns9
Break-before-make time tBBMVNC = VNO = V+/2, RL = 50 Ω, CL = 35 pF, see Figure 15, TA = Full, V+ = 1.65 V to 1.95 Vmin 1 ns9

Pins, by the datasheet

6
1 NO
Normally open switch port. · p. 3
2 GND
Ground. · p. 3
3 NC
Normally closed switch port. · p. 3
4 COM
Common switch port. · p. 3
5 V+
Power supply. · p. 3
6 IN
Switch select. High connects COM to NO; low connects COM to NC. · p. 3

Ordering codes, by the datasheet

5
TS5A3159DBVR
SOT-23 (DBV), 6 pins · Package quantity 3000; operating temperature -40 to 85 °C · p. 21
TS5A3159DBVRE4
SOT-23 (DBV), 6 pins · Package quantity 3000; operating temperature -40 to 85 °C · p. 21
TS5A3159DBVRG4
SOT-23 (DBV), 6 pins · Package quantity 3000; operating temperature -40 to 85 °C · p. 21
TS5A3159DBVT
SOT-23 (DBV), 6 pins · Package quantity 250; operating temperature -40 to 85 °C · p. 21
TS5A3159DBVTG4
SOT-23 (DBV), 6 pins · Package quantity 250; operating temperature -40 to 85 °C · p. 21

Open-source boards using it

4
  • 6 layers30 × 48 mmHolter, the printed circuit board in 3D

    Holter

    peterisza/mobilecg

    MobilECG II is an open source clinical grade Holter ECG. For more information, please visit http://mobilecg.hu.

    231 parts66
  • 4 layers60.7 × 61.3 mmPower Unit, the printed circuit board in 3D

    Power Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    162 parts6
  • 2 layers33.5 × 52.7 mmDualsesnseIC, the printed circuit board in 3D

    DualsesnseIC

    sai-suneeth/projects

    for the proteus simulations download the mkv files

    20 parts
  • 4 layers60.7 × 61.3 mmPower Unit 2, the printed circuit board in 3D

    Power Unit 2

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    102 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TS5A3159DBV?

Yes. The symbol is Analog_Switch:TS5A3159DBV and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TS5A3159DBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TS5A3159DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TS5A3159DBV?

JLCPCB lists it as part C92485, with 108 in stock; the sellers' links on this page open their listings.

What can replace the TS5A3159DBV?

Parts like it in the library: the TS5A3157DBVR-JSM by JSMSEMI, the TMUX1219DBV by Texas Instruments, the COS3157ST by COSINE and the COS4561TR by COSINE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TS5A3159DBV?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.