Skip to the content
P$5P$10

TS3USB221ERSE

Texas InstrumentsExtended

-40℃~+85℃ 12ns 1GHz 2 2.3V~3.6V 250ps 2:1 30ns 6Ω 7pF UQFN-10-EP(1.5x2) Analog Switches, Multiplexers ROHS

Part id
ti/TS3USB221ERSE
Category
Analog Switches, Multiplexers
Package
UQFN-10-EP(1.5x2)
Pins
10
In stock
6,646 at JLCPCB (C129313)
Used on
1 open-source board

Overview

The TS3USB221ERSE is an analog Switches, Multiplexer made by Texas Instruments in a UQFN-10-EP(1.5x2) package with 10 pins. -40℃~+85℃ 12ns 1GHz 2 2.3V~3.6V 250ps 2:1 30ns 6Ω 7pF UQFN-10-EP(1.5x2) Analog Switches, Multiplexers ROHS.

PCBKit's library has its KiCad symbol (pimoroni:TS3USB221E, from Eagle libraries) and its footprint (pimoroni-ics:UQFN10, from Eagle libraries), ready for a KiCad board. 6,646 are in stock at JLCPCB (part C129313). 1 open-source board in 1 repository on GitHub use it.

Symbol

P$11D+P$21D-P$32D+P$42D-P$5GNDP$6OEP$7D-P$8D+P$9SP$10VCC
pimoroni:TS3USB221EFrom Eagle libraries

Footprint

P$5P$10
pimoroni-ics:UQFN10From Eagle libraries

From the datasheet

12
Supply, least
2.3 V · VCC, recommended operating min · p. 4
Supply, most
3.6 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
4.6 V · VCC, absolute maximum · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Takes working
30 µA · VCC supply current max, switch ON, II/O = 0 V · p. 5
Takes asleep
1 µA · VCC supply current max, OE high, switch disabled · p. 5
A pin gives at most
120 mA · ON-state switch current absolute maximum magnitude · p. 4
Junction to air (RSE (UQFN))
204.8 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (RSE (UQFN))
121.5 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (RSE (UQFN))
118.1 K/W · Junction-to-case (top) thermal resistance · p. 5
Data rate, most
480 Mbit/s · High-speed USB 2.0 data rate · p. 12

What it is and has

7
Switch configuration
2-channel SPDT, high-speed USB · p. 12
USB
USB 2.0, 480 Mbps · p. 12
Switch I/O tolerance
5.5 V · p. 1
Control inputs
1.8 V compatible · p. 1
Bandwidth
1 GHz typical · p. 1
ON resistance
6 Ω maximum · p. 1
Package
RSE, UQFN, 10 pins, 2 mm × 1.5 mm · p. 1

Around it

2
cap 0.1 μF
between VCC and GND; Supply bypass capacitor shown in the typical application; place as close as possible to VCC. · p. 13
res 50 Ω
between unused pins and GND; Recommended on unused pins to prevent signal reflections. · p. 13

Specifications

58
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.5 · max 4.6 V4
Control input voltage VINOver operating free-air temperature rangemin -0.5 · max 7 V4
Switch I/O voltage VI/OOver operating free-air temperature rangemin -0.5 · max 7 V4
Control input clamp current IIKVIN < 0max -50 mA4
I/O port clamp current II/OKVI/O < 0max -50 mA4
ON-state switch current II/O±120 mA limitmax 120 mA4
Continuous current through VCC or GND±100 mA limitmax 100 mA4
Package thermal impedance θJARSE packagemax 243 °C/W4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; I/O pins to GND; ±12000 Vmax 12000 V4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; pins GND, OE, S and VCC; ±7000 Vmax 7000 V4
Electrostatic discharge V(ESD)Contact discharge (IEC 61000-4-2); I/O pins to GND; ±7000 Vmax 7000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD-002; ±1000 Vmax 1000 V4
Supply voltage VCCmin 2.3 · max 3.6 V4
Data input/output voltage VI/Omin 0 · max 5.5 V4
Operating free-air temperature TAmin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJARSE (UQFN), 10 PINStyp 204.8 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)RSE (UQFN), 10 PINStyp 118.1 °C/W5
Junction-to-board thermal resistance RθJBRSE (UQFN), 10 PINStyp 121.5 °C/W5
Junction-to-top characterization parameter ψJTRSE (UQFN), 10 PINStyp 13.9 °C/W5
Junction-to-board characterization parameter ψJBRSE (UQFN), 10 PINStyp 121.2 °C/W5
Control inputs VIKVCC = 3.6 V, 2.7 V; II = –18 mAmin -1.8 V5
Control inputs IINVCC = 3.6 V, 2.7 V, 0 V; VIN = 0 V to 3.6 V; ±1 uA limitmax 1 uA5
IOZ IOZVCC = 3.6 V, 2.7 V; VO = 0 V to 5.25 V; VI = 0 V; VIN = VCC or GND; Switch OFF; ±1 uA limitmax 1 uA5
IOFF IOFFVCC = 0 V; VI/O = 0 V to 5.25 V; ±2 uA limitmax 2 uA5
IOFF IOFFVCC = 0 V; VI/O = 0 V to 3.6 V; ±2 uA limitmax 2 uA5
IOFF IOFFVCC = 0 V; VI/O = 0 V to 2.7 V; ±1 uA limitmax 1 uA5
ICC ICCVCC = 3.6 V, 2.7 V; VIN = VCC or GND; II/O = 0 V; Switch ON or OFFmax 30 uA5
ICC (low power mode) ICCVCC = 3.6 V, 2.7 V; VIN = VCC or GND; Switch disabled (OE in high state)max 1 uA5
Control inputs ICCOne input at 1.8 V; other inputs at VCC or GND; VCC = 3.6 V; increase in supply current per inputmax 20 uA5
Control inputs ICCOne input at 1.8 V; other inputs at VCC or GND; VCC = 2.7 V; increase in supply current per inputmax 0.5 uA5
Control inputs CinVCC = 3.3 V, 2.5 V; VIN = 3.3 V or 0 Vtyp 1.5 · max 2.5 pF5
Cio(OFF) Cio(OFF)VCC = 3.3 V, 2.5 V; VI/O = 3.3 V or 0 V; Switch OFFtyp 3.5 · max 5 pF5
Cio(ON) Cio(ON)VCC = 3.3 V, 2.5 V; VI/O = 3.3 V or 0 V; Switch ONtyp 6 · max 7.5 pF5
rON rONVCC = 3 V, 2.3 V; VI = 0 V; IO = 30 mAtyp 3 · max 6 Ω5
rON rONVCC = 3 V, 2.3 V; VI = 2.4 V; IO = –15 mAtyp 3.4 · max 6 Ω5
ΔrON ΔrONVCC = 3 V, 2.3 V; VI = 0 V; IO = 30 mAtyp 0.2 Ω5
ΔrON ΔrONVCC = 3 V, 2.3 V; VI = 1.7; IO = –15 mAtyp 0.2 Ω5
rON(flat) rON(flat)VCC = 3 V, 2.3 V; VI = 0 V; IO = 30 mAtyp 1 Ω5
rON(flat) rON(flat)VCC = 3 V, 2.3 V; VI = 1.7; IO = –15 mAtyp 1 Ω5
Crosstalk XTALKRL = 50, f = 250 MHz; TA = –40°C to 85°C; GND = 0 Vtyp -40 dB6
OFF isolation OIRRRL = 50, f = 250 MHz; TA = –40°C to 85°C; GND = 0 Vtyp -40 dB6
Bandwidth (–3 dB) BWRL = 50; TA = –40°C to 85°C; GND = 0 Vtyp 1 GHz6
Crosstalk XTALKRL = 50, f = 250 MHz; TA = –40°C to 85°C; GND = 0 Vtyp -39 dB6
OFF isolation OIRRRL = 50, f = 250 MHz; TA = –40°C to 85°C; GND = 0 Vtyp -40 dB6
Bandwidth (3 dB) BWRL = 50; TA = –40°C to 85°C; GND = 0 Vtyp 1 GHz6
Propagation delay tpdTA = –40°C to 85°C; GND = 0 V; specified by designtyp 0.25 ns6
Line enable time tONS to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 30 ns6
Line enable time tONOE to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 17 ns6
Line disable time tOFFS to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 12 ns6
Line disable time tOFFOE to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 10 ns6
Output skew between center port to any other port tSK(O)TA = –40°C to 85°C; GND = 0 V; specified by designtyp 0.1 · max 0.2 ns6
Skew between opposite transitions of the same output (tPHL– tPLH) tSK(P)TA = –40°C to 85°C; GND = 0 V; specified by designtyp 0.1 · max 0.2 ns6
Line enable time tONS to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 50 ns6
Line enable time tONOE to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 32 ns6
Line disable time tOFFS to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 23 ns6
Line disable time tOFFOE to D, nD; TA = –40°C to 85°C; GND = 0 Vmax 12 ns6
Skew between opposite transitions of the same output (tPHL– tPLH) tSK(P)TA = –40°C to 85°C; GND = 0 V; specified by designtyp 0.1 · max 0.2 ns6

Pins, by the datasheet

10
1 1D+
USB port 1. · p. 3
2 1D–
USB port 1. · p. 3
3 2D+
USB port 2. · p. 3
4 2D–
USB port 2. · p. 3
5 GND
Ground. · p. 3
6 OE
Bus-switch enable; high disables the switch and selects low power mode. · p. 3
7 D–
Common USB port. · p. 3
8 D+
Common USB port. · p. 3
9 S
Select input. · p. 3
10 VCC
Supply voltage. · p. 3

Open-source boards using it

1
  • 4 layers150 × 120 mmPi usb port switch, the printed circuit board in 3D

    Pi usb port switch

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    197 parts3MIT

Questions

Is there a KiCad symbol and footprint for the TS3USB221ERSE?

Yes. The symbol is pimoroni:TS3USB221E and the footprint pimoroni-ics:UQFN10, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TS3USB221ERSE?

UQFN-10-EP(1.5x2), with 10 pins. Its footprint is drawn on this page.

Where is the TS3USB221ERSE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TS3USB221ERSE?

JLCPCB lists it as part C129313, with 6,646 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TS3USB221ERSE?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.