Overview
The TRF7963RHB is a RFID IC made by Texas Instruments in a VQFN-32(5x5) package with 33 pins. 13.56MHz 2.7V~5.5V ISO 14443 SPI VQFN-32(5x5) RFID ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TRF7963RHBR, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3304620).
Symbol
Footprint
Pinout
33| Pin | Name | Type |
|---|---|---|
| 1 | VDD_A | Unspecified |
| 2 | VIN | Unspecified |
| 3 | VDD_RF | Unspecified |
| 4 | VDD_PA | Unspecified |
| 5 | TX_OUT | Unspecified |
| 6 | VSS_RF | Unspecified |
| 7 | VSS_RX | Unspecified |
| 8 | RX_IN1 | Unspecified |
| 9 | RX_IN2 | Unspecified |
| 10 | VSS | Unspecified |
| 11 | BAND_GAP | Unspecified |
| 12 | ASK/OOK | Unspecified |
| 13 | IRQ | Unspecified |
| 14 | MOD | Unspecified |
| 15 | VSS_A | Unspecified |
| 16 | VDD_I/O | Unspecified |
| 17 | I/O_0 | Unspecified |
| 18 | I/O_1 | Unspecified |
| 19 | I/O_2 | Unspecified |
| 20 | I/O_3 | Unspecified |
| 21 | I/O_4 | Unspecified |
| 22 | I/O_5 | Unspecified |
| 23 | I/O_6 | Unspecified |
| 24 | I/O_7 | Unspecified |
| 25 | EN2 | Unspecified |
| 26 | DATA_CLK | Unspecified |
| 27 | SYS_CLK | Unspecified |
| 28 | EN | Unspecified |
| 29 | VSS_D | Unspecified |
| 30 | OSC_OUT | Unspecified |
| 31 | OSC_IN | Unspecified |
| 32 | VDD_X | Unspecified |
| 33 | EP | Unspecified |
Parts like it
8TRF7964ARHB
VQFN-32-EP(5x5)106Kbit/s、212Kbit/s、424Kbit/s、848Kbit/s 13.56MHz 2.7V~5.5V FeliCa,ISO 14443A,ISO 14443B,ISO 15693,ISO 18000-3 SPI VQFN-32-EP(5x5) RFID ICs ROHSTexas InstrumentsRFID ICsST25DV04KC-IE6S3
SO-81.8V~5.5V 13.56MHz 53Kbit/s I2C ISO 15693,NFC SO-8 RFID ICs ROHSSTMicroelectronicsRFID ICsMFRC522
QFN-32-EP(5x5)10uA 13.56MHz 2.5V~4V Data verification、Low power wake-up I2C,SPI,UART ISO 14443A,ISO 14443B QFN-32-EP(5x5) RFID ICs ROHSJSMSEMIRFID ICsCLRC66303HNY
HVQFN-32-EP(5x5)RFID ICsNXP SemiconductorsPN7150B0HN/C11002Y
VQFN-40-EP(6x6)106Kbit/s、212Kbit/s、424Kbit/s、848Kbit/s 13.56MHz 2.3V~5.5V 20uA Built-in antenna driver、Low power wake-up、Built-in non-volatile memory FeliCa,ISO 14443A,ISO 14443B,ISO 15693,ISO 18000-3,MIFARE,NFC I2C VQFN-40-EP(6x6) RFID ICs ROHSNXP SemiconductorsRFID ICsNT3H1101W0FHKH
XQFN-8(1.6x1.6)1.7V~3.6V 13.56MHz I2C ISO 14443 XQFN-8(1.6x1.6) RFID ICs ROHSNXP SemiconductorsRFID ICsST25DV04K-IER6T3
TSSOP-81.8V~5.5V 13.56MHz 53Kbit/s I2C ISO 15693,NFC TSSOP-8 RFID ICs ROHSSTMicroelectronicsRFID ICsST25R3911B-AQFT
QFN-32-EP(5x5)13.56MHz 2.4V~5.5V Built-in antenna driver、Data verification、Low power wake-up FeliCa,ISO 18092,ISO 14443A,ISO 14443B,ISO 15693,NFC SPI QFN-32-EP(5x5) RFID ICs ROHSSTMicroelectronicsRFID ICs
Questions
Is there a KiCad symbol and footprint for the TRF7963RHB?
Yes. The symbol is EasyEDA_Cloud:TRF7963RHBR and the footprint EasyEDA_Cloud:VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TRF7963RHB?
VQFN-32(5x5), with 33 pins. Its footprint is drawn on this page.
Where can I order the TRF7963RHB?
JLCPCB lists it as part C3304620, with 0 in stock; the sellers' links on this page open their listings.
What can replace the TRF7963RHB?
Parts like it in the library: the TRF7964ARHB by Texas Instruments, the ST25DV04KC-IE6S3 by STMicroelectronics, the MFRC522 by JSMSEMI and the CLRC66303HNY by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.