
Route
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
Texas InstrumentsExtended
-40℃~+125℃ 1 1V~20V 3V~36V 400kHz 4mm 6.5mm 7.5mm 8A 8uA 95% Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode、External clock synchronization Step-down type ±1% B3QFN-22(6.5x7.5) DC-DC Power Modules ROHS
The TPSM63610RDFR is a DC DC Power Module made by Texas Instruments in a B3QFN-22(6.5x7.5) package with 22 pins. -40℃~+125℃ 1 1V~20V 3V~36V 400kHz 4mm 6.5mm 7.5mm 8A 8uA 95% Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode、External clock synchronization Step-down type ±1% B3QFN-22(6.5x7.5) DC-DC Power Modules ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPSM63610RDFR, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-22_L7.5-W6.5_TLVM13610RDFR, from EasyEDA), ready for a KiCad board. 996 are in stock at JLCPCB (part C7125816). 3 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VIN1 | Unspecified |
| 2 | RBOOT | Unspecified |
| 3 | CBOOT | Unspecified |
| 4 | SW | Unspecified |
| 5 | VLDOIN | Unspecified |
| 6 | VCC | Unspecified |
| 7 | AGND | Unspecified |
| 8 | FB | Unspecified |
| 9 | VOUT1 | Unspecified |
| 10 | VOUT2 | Unspecified |
| 11 | AGND | Unspecified |
| 12 | RT | Unspecified |
| 13 | PG | Unspecified |
| 14 | SPSP | Unspecified |
| 15 | MODE | Unspecified |
| 16 | NC | Unspecified |
| 17 | EN | Unspecified |
| 18 | VIN2 | Unspecified |
| 19 | PGND | Unspecified |
| 20 | PGND | Unspecified |
| 21 | AGND | Unspecified |
| 22 | AGND | Unspecified |

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

ssmo-oss/UMI-Power-distribution
Three separate boards distribute a 12 V supply to the UMI system. D6 is the current prototype revision. It has not been physically qualified or approved for production.
Yes. The symbol is EasyEDA_Cloud:TPSM63610RDFR and the footprint EasyEDA_Cloud:QFN-22_L7.5-W6.5_TLVM13610RDFR, both drawn on this page. PCBKit places them on a board for you when you design with it.
B3QFN-22(6.5x7.5), with 22 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C7125816, with 996 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the TLVM13610RDFR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.