Skip to the content
11

TPS7A91DSK

Texas Instruments

Part id
ti/TPS7A91DSK
Category
Uncategorised
Pins
15
Used on
9 open-source boards

Overview

The TPS7A91DSK is an uncategorised made by Texas Instruments with 11 pins.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS7A91, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_S-PDSO-N10_EP1.2x2mm, from KiCad's library), ready for a KiCad board. 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1OUT3FB4GND5PG6SS_CTRL7EN8NR/SS9IN
Regulator_Linear:TPS7A91From KiCad's library

Footprint

11
Package_DFN_QFN:Texas_S-PDSO-N10_EP1.2x2mmFrom KiCad's library

Pinout

11
The pins of the TPS7A91DSK
PinNameType
1OUTPower out
2OUTPassive
3FBInput
4GNDPower in
5PGOpen collector
6SS_CTRLInput
7ENInput
8NR/SSPassive
9INPower in
10INPassive
11GNDPassive

Open-source boards using it

9See all 9
  • 4 layers94.6 × 83.4 mmFmcw nightly, the printed circuit board in 3D

    Fmcw nightly

    matthuszagh/fmcw

    6GHz frequency-modulated continuous-wave radar with real-time range detection

    446 parts66Apache-2.0
  • 4 layers45 × 49 mmSwarm drone, the printed circuit board in 3D

    Swarm drone

    aniranaway/Drone_Swarm

    A fully custom, low-level embedded hardware and firmware platform designed for autonomous multi drone swarms. The system integrates custom STM32-based flight controller PCBs, coreless DC motor drive arrays for a micro…

    108 parts
  • 4 layers100 × 65 mmAmpere, the printed circuit board in 3D

    Ampere

    LtBrain/Ampere

    A variable benchtop power supply

    214 partsMIT
  • 4 layers85 × 41 mmGateway PCB v2, the printed circuit board in 3D

    Gateway PCB v2

    LThakdanai/LoRaWAN-Gateway-v2

    113 parts
  • 4 layers377.3 × 130.4 mmRf frontend, the printed circuit board in 3D

    Rf frontend

    wzwqoo/fmcw_10ghz_radar

    A single-board 1TX / 3RX, 10 GHz FMCW radar, its Artix-7 range–Doppler–CFAR backend, and the carrier board that mounts the radar alongside a global-shutter camera and an impact microphone.

    351 parts
  • 4 layers119.6 × 58.9 mmFmcw, the printed circuit board in 3D

    Fmcw

    matthuszagh/fmcw

    6GHz frequency-modulated continuous-wave radar with real-time range detection

    415 parts66Apache-2.0
  • 4 layers51.3 × 23.4 mmLoRa GW FeatherWing, the printed circuit board in 3D

    LoRa GW FeatherWing

    kitspace-test-repos/kicad6-file-collection

    116 partsMIT

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the TPS7A91DSK?

Yes. The symbol is Regulator_Linear:TPS7A91 and the footprint Package_DFN_QFN:Texas_S-PDSO-N10_EP1.2x2mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the TPS7A91DSK?

Parts like it in the library: the TPS63030DSK by Texas Instruments and the TPS63031DSK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A91DSK?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.