Skip to the content
123456789101112131415161718192021

TPS7A3301RGWR

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.175V~33.2V 16uVrms 1A 210uA 290mV@(500mA) 35V 72dB@(10kHz) Adjustable Negative Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable VQFN-20-EP(5x5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS7A3301RGWR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
VQFN-20-EP(5x5)
Pins
20
In stock
4,756 at JLCPCB (C90082)
Used on
7 open-source boards

Overview

The TPS7A3301RGWR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a VQFN-20-EP(5x5) package with 21 pins. -40℃~+125℃@(Tj) 1 1.175V~33.2V 16uVrms 1A 210uA 290mV@(500mA) 35V 72dB@(10kHz) Adjustable Negative Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable VQFN-20-EP(5x5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS7A3301RGWR_C22400053, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-20_L5.0-W5.0-P0.65-TL-EP, from EasyEDA), ready for a KiCad board. 4,756 are in stock at JLCPCB (part C90082). 7 open-source boards in 4 repositories on GitHub use it.

Symbol

1OUT2NC3FB4NC5NC6NC7GND8NC9NC10NC11NC12NC13EN14NR/SS15IN16IN17NC18NC19NC20OUT21EPAD
EasyEDA_Cloud:TPS7A3301RGWR_C22400053From EasyEDA

Footprint

123456789101112131415161718192021
EasyEDA_Cloud:VQFN-20_L5.0-W5.0-P0.65-TL-EPFrom EasyEDA

From the datasheet

12
Supply, absolute maximum
36 V · IN, negative absolute maximum rating · p. 5
Junction, hottest
150 °C · absolute maximum operating virtual junction temperature · p. 5
Takes working
210 µA · typical ground current, IOUT = 0 mA · p. 6
Takes asleep
1 µA · typical shutdown supply current, VEN = +0.4 V · p. 6
Gives
1 A · max recommended continuous output current · p. 5
Current limit
1.9 A · typical current limit, VOUT = 90% VOUT(nom) · p. 6
Feedback reference
1.175 V · typical internal reference, TJ = 25°C · p. 6
Dropout
290 mV · typical at IOUT = 500 mA, VIN = 95% VOUT(nom) · p. 6
Dropout
325 mV · typical at IOUT = 1 A, VIN = 95% VOUT(nom) · p. 6
Junction to air (RGW (VQFN))
33.7 K/W · junction-to-ambient thermal resistance · p. 5
Junction to board (RGW (VQFN))
12.5 K/W · junction-to-board thermal resistance · p. 5
Junction to case (RGW (VQFN))
30.4 K/W · junction-to-case(top) thermal resistance · p. 5

What it is and has

4
Adjustable output
–1.18V 至 –33V · p. 1
Output current
1A · p. 1
Protection
Current limit and thermal shutdown · p. 1
Output capacitor compatibility
Stable with ceramic capacitors ≥ 10μF · p. 1

Around it

6
cap 10-nF
between FB and OUT; Recommended close to the device to maximize AC performance. · p. 4
cap 10 nF
between IN and GND; Minimum capacitance required for stability; recommended operating conditions specify a 10-uF minimum. · p. 4
cap 10-µF
between IN and GND; Recommended close to the device to reduce sensitivity to PCB layout. · p. 4
cap 1-µF
between NR/SS and GND; Recommended close to the device for noise filtering and soft-start. · p. 4
cap 10 µF
between OUT and GND; Minimum required for stability. · p. 4
cap 47-µF
between OUT and GND; Ceramic capacitor recommended close to the device to maximize AC performance. · p. 4

Specifications

56
ParameterConditionsAs printedPage
VoltageIN pin to GND pinmin -36 · max 0.3 V5
VoltageOUT pin to GND pinmin -33 · max 0.3 V5
VoltageOUT pin to IN pinmin -0.3 · max 36 V5
VoltageFB pin to GND pinmin -2 · max 0.3 V5
VoltageFB pin to IN pinmin -0.3 · max 36 V5
VoltageEN pin to GND pinmin -36 · max 10 V5
VoltageNR/SS pin to IN pinmin -0.3 · max 36 V5
VoltageNR/SS pin to GND pinmin -2 · max 0.3 V5
Temperature TJOperating virtual junctionmin -40 · max 150 °C5
Temperature TstgStorage temperaturemin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±1000 Vmax 1000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 Vmax 500 V5
Input supply voltage VINmin -35 · max -3 V5
Enable supply voltage VENMinimum is VINmax 10 V5
Output voltage VOUTMaximum is VREFmin -33.2 V5
Output current IOUTmin 0 · max 1 A5
R2 is the lower feedback resistor R2Helps ensure stability at no loadmax 240 kΩ5
Input capacitor CINmin 10 · typ 47 uF5
Output capacitor COUTmin 10 · typ 47 uF5
Noise reduction capacitor CNRtyp 1 uF5
Feed-forward capacitor CFFtyp 10 nF5
Operating junction temperature TJmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJARGW (VQFN), 20 PINStyp 33.7 °C/W5
Junction-to-case(top) thermal resistance RθJC(top)RGW (VQFN), 20 PINStyp 30.4 °C/W5
Junction-to-board thermal resistance RθJBRGW (VQFN), 20 PINStyp 12.5 °C/W5
Junction-to-top characterization parameter ψJTRGW (VQFN), 20 PINStyp 0.4 °C/W5
Junction-to-board characterization parameter ψJBRGW (VQFN), 20 PINStyp 12.5 °C/W5
Junction-to-case(bottom) thermal resistance RθJC(bot)RGW (VQFN), 20 PINStyp 2.4 °C/W5
Input voltage VINmin -35 · max -3 V6
Internal reference VREFTJ = 25°C, VFB = VREFmin -1.192 · typ -1.175 · max -1.157 V6
Undervoltage lockout threshold VUVLOtyp -2 V6
Output voltage range VOUT|VIN| ≥ |VOUT(nom)| + 1 V; maximum is VREFmin -33.2 V6
Nominal accuracy VOUTTJ = 25°C, |VIN| = |VOUT(nom)| + 0.5 Vmin -1.5 · max 1.5 %VOUT6
Overall accuracy VOUT5 V ≤ |VIN| ≤ 35 V; 1 mA ≤ IOUT ≤ 1 A; typical ±1 %VOUTtyp 1 %VOUT6
Overall accuracy VOUT|VOUT(nom)| + 1 V ≤ |VIN| ≤ 35 V; 1 mA ≤ IOUT ≤ 1 Amin -2.5 · max 2.5 %VOUT6
Line regulation ΔVOUT(ΔVI)|VOUT(nom)| + 1 V ≤ |VIN| ≤ 35 Vtyp 0.14 %VOUT6
Load regulation ΔVOUT(ΔIL)1 mA ≤ IOUT ≤ 1 Atyp 0.4 %VOUT6
Dropout voltage |VDO|VIN = 95% VOUT(nom), IOUT = 500 mAtyp 290 mV6
Dropout voltage |VDO|VIN = 95% VOUT(nom), IOUT = 1 Atyp 325 · max 800 mV6
Current limit ICLVOUT = 90% VOUT(nom)typ 1900 mA6
Ground current IGNDIOUT = 0 mAtyp 210 · max 350 uA6
Ground current IGNDIOUT = 500 mAtyp 5 mA6
Shutdown supply current |ISHDN|VEN = +0.4 Vtyp 1 · max 3 uA6
Shutdown supply current |ISHDN|VEN = –0.4 Vtyp 1 · max 3 uA6
Feedback current IFBIFB > 0 flows into the devicetyp 14 · max 100 nA6
Enable current |IEN|VEN = |VIN| = |VOUT(nom)| + 1 Vtyp 0.48 · max 1 uA6
Enable current |IEN|VIN = VEN = –35 Vtyp 0.51 · max 1 uA6
Enable current |IEN|VIN = –35 V, VEN = +10 Vtyp 0.5 · max 1 uA6
Positive enable high-level voltage VEN(+HI)min 2 · max 10 V6
Positive enable low-level voltage VEN(+LO)min 0 · max 0.4 V6
Negative enable high-level voltage VEN(–HI)Minimum is VINmax -2 V6
Negative enable low-level voltage VEN(–LO)min -0.4 · max 0 V6
Output noise voltage VnVIN = –3 V, VOUT(nom) = VREF, COUT = 22 uF, CNR/SS = 10 nF, BW = 10 Hz to 100 kHztyp 16 uVRMS6
Power-supply rejection ratio PSRRVIN = –6.2 V, VOUT(nom) = –5 V, COUT = 22 uF, CNR/SS = 10 nF, CFF = 10 nF, f = 10 kHztyp 72 dB6
Thermal shutdown temperature TsdShutdown, temperature increasingtyp 170 °C6
Thermal shutdown temperature TsdReset, temperature decreasingtyp 150 °C6

Pins, by the datasheet

21
1 OUT
Regulator output; connect at least 10 uF to ground, with 47-uF ceramic recommended close to the device. · p. 4
2 NC
May be left open or tied to any voltage between GND and IN. · p. 4
3 FB
Control-loop error amplifier input for setting output voltage; 10-nF capacitor to OUT recommended close to the device. · p. 4
4 NC
May be left open or tied to any voltage between GND and IN. · p. 4
5 NC
May be left open or tied to any voltage between GND and IN. · p. 4
6 NC
May be left open or tied to any voltage between GND and IN. · p. 4
7 GND
Ground. · p. 4
8 NC
May be left open or tied to any voltage between GND and IN. · p. 4
9 NC
May be left open or tied to any voltage between GND and IN. · p. 4
10 NC
May be left open or tied to any voltage between GND and IN. · p. 4
11 NC
May be left open or tied to any voltage between GND and IN. · p. 4
12 NC
May be left open or tied to any voltage between GND and IN. · p. 4
13 EN
Enables or disables the regulator; may connect to IN if unused, with |VEN| ≤ |VIN|. · p. 4
14 NR/SS
Capacitor to GND controls soft-start and reduces noise; 1-uF capacitor recommended close to the device. · p. 4
15 IN
Input supply; at least 10 nF to ground required, with 10 uF recommended close to the device. · p. 4
16 IN
Input supply; at least 10 nF to ground required, with 10 uF recommended close to the device. · p. 4
17 NC
May be left open or tied to any voltage between GND and IN. · p. 4
18 NC
May be left open or tied to any voltage between GND and IN. · p. 4
19 NC
May be left open or tied to any voltage between GND and IN. · p. 4
20 OUT
Regulator output; connect at least 10 uF to ground, with 47-uF ceramic recommended close to the device. · p. 4
Thermal Pad Thermal Pad
Internally connected to GND; connect to a large-area ground plane. · p. 22

Open-source boards using it

7
  • 4 layers208 × 129 mmMainboard v2 r1, the printed circuit board in 3D

    Mainboard v2 r1

    Benjamin-girard-1/geophys_acquisition_module

    Modular ESP32-S3 geophysical data-acquisition system with custom hardware, multi-channel ADC, GNSS, IMU, removable analog sensor cards, firmware, and host tools

    287 parts
  • 4 layers190 × 110 mmGeophys mainboard, the printed circuit board in 3D

    Geophys mainboard

    Benjamin-girard-1/magnetometer-node-old

    384 parts
  • 4 layers100 × 100 mmDIY AWG V1.1, the printed circuit board in 3D

    DIY AWG V1.1

    Xpeditor15/DIY_AWG_V1.0

    235 parts
  • 4 layers165.7 × 132 mmPower Supply, the printed circuit board in 3D

    Power Supply

    annegautham/STM

    Repo for STM prototype personal project

    82 partsMIT
  • 4 layers190 × 110 mmMainboard v2, the printed circuit board in 3D

    Mainboard v2

    Benjamin-girard-1/magnetometer-node-old

    260 parts
  • 4 layers190 × 110 mmWith GL3224, the printed circuit board in 3D

    With GL3224

    Benjamin-girard-1/magnetometer-node-old

    282 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS7A3301RGWR?

Yes. The symbol is EasyEDA_Cloud:TPS7A3301RGWR_C22400053 and the footprint EasyEDA_Cloud:VQFN-20_L5.0-W5.0-P0.65-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS7A3301RGWR?

VQFN-20-EP(5x5), with 21 pins. Its footprint is drawn on this page.

Where is the TPS7A3301RGWR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS7A3301RGWR?

JLCPCB lists it as part C90082, with 4,756 in stock; the sellers' links on this page open their listings.

What can replace the TPS7A3301RGWR?

Parts like it in the library: the TPS74801RGWR by Texas Instruments, the TPS74901RGWR by Texas Instruments, the TPS74401RGWT by Texas Instruments and the TPS74401RGWR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A3301RGWR?

7 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.