Skip to the content
12345

TPS7A0518PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.8V 180uVrms 1uA 200mA 235mV@(200mA) 40dB@(1kHz) 5.5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS7A0518PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
42 at JLCPCB (C2862322)
Used on
6 open-source boards

Overview

The TPS7A0518PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 180uVrms 1uA 200mA 235mV@(200mA) 40dB@(1kHz) 5.5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS7A0518PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 42 are in stock at JLCPCB (part C2862322). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TPS7A0518PDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
1.4 V · VIN, recommended operating minimum · p. 6
Supply, most
5.5 V · VIN, recommended operating maximum · p. 6
Supply, absolute maximum
6 V · IN, absolute maximum · p. 6
Junction, hottest
125 °C · Operating junction temperature maximum · p. 6
Takes working
1 µA · IGND, typical at TJ = 25°C, IOUT = 1 uA · p. 7
Takes asleep
100 nA · Shutdown current typical, VEN = 0.4 V, TJ = 25°C · p. 7
Gives
200 mA · Continuous output current maximum, recommended operating · p. 6
Current limit
450 mA · Output current limit typical, VOUT = 90% × VOUT(nom) · p. 7
Dropout
341 mV · Maximum at IOUT = 200 mA, TJ = –40°C to +85°C, 1.8 V output · p. 8
Dropout
382 mV · Maximum at IOUT = 200 mA, TJ = –40°C to +125°C, 1.8 V output · p. 8
Junction to air (DBV)
185.6 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (DBV)
104.3 K/W · Junction-to-case top thermal resistance · p. 6
Junction to board (DBV)
54.5 K/W · Junction-to-board thermal resistance · p. 6

What it is and has

6
Quiescent current
1 µA typical, 3 µA maximum · p. 1
Ground current
6 µA typical at 200 mA · p. 1
Output accuracy
1% typical, 3% maximum · p. 1
Protection
Foldback current limit · p. 1
Output discharge
Active · p. 1
Package
SOT-23 (5) · p. 1

Around it

2
cap 1 µF
between IN and GND; Nominal input capacitance; use ceramic and place as close to IN as possible. · p. 6
cap 1 µF
between OUT and GND; Nominal output capacitance; recommended range 0.47 to 22 uF; required for stability, ceramic preferred, close to OUT. · p. 6

Specifications

48
ParameterConditionsAs printedPage
VoltageIN; all voltages with respect to GNDmin -0.3 · max 6 V6
VoltageEN; maximum VIN + 0.3 Vmin -0.3 V6
VoltageOUT; maximum VIN + 0.3 V or 3.6 V, whichever is smallermin -0.3 V6
Operating junction temperature TJmin -40 · max 125 °C6
Storage temperature Tstgmin -65 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±1000 Vmax 1000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±500 Vmax 500 V6
Input supply voltage VINmin 1.4 · max 5.5 V6
Enable supply voltage VENMaximum VINmin 0 V6
Nominal output voltage range VOUTmin 0.8 · max 3.3 V6
Output current IOUTOutput current of 10 uA minimum required to meet output voltage accuracy specificationmin 0 · max 200 mA6
Input capacitor CINNOM columntyp 1 uF6
Output capacitor COUTNOM columnmin 0.47 · typ 1 · max 22 uF6
Operating junction temperature TJmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 5 PINStyp 185.6 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DBV (SOT-23), 5 PINStyp 104.3 °C/W6
Junction-to-board thermal resistance RθJBDBV (SOT-23), 5 PINStyp 54.5 °C/W6
Junction-to-top characterization parameter ΨJTDBV (SOT-23), 5 PINStyp 31 °C/W6
Junction-to-board characterization parameter YJBDBV (SOT-23), 5 PINStyp 54.5 °C/W6
Nominal accuracyVOUT ≥ 1.0 V, TJ = 25°C; IOUT ≥ 10 uAmin -1 · max 1 %7
Accuracy over temperatureVOUT ≥ 1.0 V, TJ = –40°C to +85°C; IOUT ≥ 10 uAmin -2 · max 2 %7
Accuracy over temperatureVOUT ≥ 1.0 V, TJ = –40°C to +125°C; IOUT ≥ 10 uAmin -3 · max 3 %7
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = –40°C to +85°Ctyp 5 · max 16.5 mV7
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = –40°C to +125°Cmax 18 mV7
Load regulation ΔVOUT(ΔIOUT)DBV; 100 uA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = –40°C to +85°C; normalized to IOUT = 1 mAtyp 20 · max 43 mV7
Load regulation ΔVOUT(ΔIOUT)DBV; 100 uA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = –40°C to +125°C; normalized to IOUT = 1 mAmax 55 mV7
Ground current IGNDTJ = 25°C, IOUT = 1 uAmin 0.6 · typ 1 · max 1.3 uA7
Ground current IGNDIOUT = 1 uA, TJ = –40°C to +85°Cmax 2 uA7
Ground current IGNDIOUT = 1 uA, TJ = –40°C to +125°Cmax 3 uA7
Shutdown current ISHDNVEN = 0.4 V, 1.4 V ≤ VIN ≤ 5.5 V, TJ = 25°Ctyp 100 · max 300 nA7
Output current limit ICLVOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 Vmin 210 · typ 450 · max 700 mA7
Output current limit ICLVOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V, TJ = 0°C to +85°Cmin 250 · typ 450 · max 700 mA7
Short-circuit current limit ISCVOUT = 0 Vtyp 65 · max 150 mA7
Dropout voltage VDODBV; IOUT = 200 mA, TJ = –40°C to +85°C, 1.8 V ≤ VOUT < 2.5 V; measured at VOUT = VOUT(nom) – 5%max 341 mV8
Dropout voltage VDODBV; IOUT = 200 mA, TJ = –40°C to +125°C, 1.8 V ≤ VOUT < 2.5 V; measured at VOUT = VOUT(nom) – 5%max 382 mV8
Power-supply rejection ratio PSRRf = 1 kHz, IOUT = 30 mAtyp 40 dB8
Power-supply rejection ratio PSRRf = 500 kHz, IOUT = 30 mAtyp 30 dB8
Power-supply rejection ratio PSRRf = 1 MHz, IOUT = 30 mAtyp 40 dB8
UVLO threshold VUVLOVIN risingmin 1.21 · typ 1.3 · max 1.37 V8
UVLO hysteresis VUVLO(HYST)VIN fallingtyp 40 mV8
UVLO threshold VUVLOVIN fallingmin 1.17 · max 1.33 V8
EN pin logic high voltage VEN(HI)min 0.9 V8
EN pin logic low voltage VEN(LO)max 0.4 V8
EN pin current IENVEN = VIN = 5.5 Vtyp 10 nA8
Pulldown resistor RPULLDOWNVIN = 3.3 V, P version onlytyp 120 Ω8
Thermal shutdown temperature TsdShutdown, temperature increasingtyp 160 °C8
Thermal shutdown temperature TsdReset, temperature decreasingtyp 140 °C8
Start-up time tSTRFrom EN assertion to VOUT = 95% × VOUT(nom), VOUT = 1.8 V; TJ = –40 to +125°C, VIN = VOUT(nom) + VDO(max) + 0.5 V, IOUT = 10 mA, CIN = 1 uF, COUT = 1 uF; typical at TJ = 25°Ctyp 1.5 · max 2.8 ms9

Pins, by the datasheet

5
1 IN
Input supply; connect a recommended-value or larger ceramic capacitor to ground as close to the input as possible. · p. 5
2 GND
Connect to ground on the board. · p. 5
3 EN
High enables and low disables the device; connect to IN if enable control is unused; VEN must not exceed VIN. · p. 5
4 NC
Not internally connected; connect to ground or leave floating. · p. 5
5 OUT
Regulated output; a capacitor to ground is required for stability and should be placed as close to the output as possible. · p. 5

Open-source boards using it

6
  • 4 layers49.3 × 53.8 mmNovara main, the printed circuit board in 3D

    Novara main

    abhisheknote1234-writ/Novara_PCB_Design

    The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

    52 parts
  • 4 layers45 × 50 mmOpod, the printed circuit board in 3D

    Opod

    Keyaan-07/OPod

    A pocket-sized music player!

    114 parts
  • 4 layers71 × 61.4 mmQuasarSynthesizer, the printed circuit board in 3D

    QuasarSynthesizer

    petrinm/QuasarSDR-Hardware

    Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.

    145 parts7CERN-OHL-W-2.0
  • 2 layers13.9 × 42.8 mmLed button, the printed circuit board in 3D

    Led button

    GeniePod/genie-hardware

    GeniePod Home V1 hardware: MVP testing build, wiring, BOM, and planned interface-board/enclosure docs.

    126 parts2CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS7A0518PDBV?

Yes. The symbol is Regulator_Linear:TPS7A0518PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS7A0518PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS7A0518PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS7A0518PDBV?

JLCPCB lists it as part C2862322, with 42 in stock; the sellers' links on this page open their listings.

What can replace the TPS7A0518PDBV?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A0518PDBV?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.