TPS7A0218PDBV
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 1.8V 130uVrms 200mA 25nA 450mV@(200mA) 55dB@(1kHz) 6V Fixed Over Current Protection、Thermal shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TPS7A0218PDBV
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 3,449 at JLCPCB (C3748843)
Overview
The TPS7A0218PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 130uVrms 200mA 25nA 450mV@(200mA) 55dB@(1kHz) 6V Fixed Over Current Protection、Thermal shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Gekkio_Regulator_Linear:TPS7A0218PDBV, from Gekkio) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3,449 are in stock at JLCPCB (part C3748843).
Symbol
Footprint
From the datasheet
13- Supply, least
- 1.5 V · VIN, recommended operating min · p. 5
- Supply, most
- 6 V · VIN, recommended operating max · p. 5
- Supply, absolute maximum
- 6.5 V · VIN, absolute max · p. 4
- Junction, hottest
- 150 °C · Operating junction temperature absolute max · p. 4
- Takes working
- 25 nA · Ground current typical, IOUT = 0 mA, TJ = 25°C · p. 6
- Takes asleep
- 3 nA · Shutdown current typical, VEN = 0 V, TJ = 25°C · p. 6
- Gives
- 200 mA · Output current recommended max · p. 5
- Current limit
- 450 mA · Output current limit typical, VOUT < 2.5 V, VOUT = 90% nominal · p. 6
- Dropout
- 400 mV · Dropout max at 200 mA, 1.8 V output, TJ = –40°C to +85°C · p. 6
- Dropout
- 450 mV · Dropout max at 200 mA, 1.8 V output, TJ = –40°C to +125°C · p. 6
- Junction to air (DBV (SOT-23-5))
- 181.9 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DBV (SOT-23-5))
- 53 K/W · Junction-to-case(top) thermal resistance · p. 5
- Junction to board (DBV (SOT-23-5))
- 88.1 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
4- Quiescent current
- 25 nA typical, even in dropout · p. 1
- Shutdown current
- 3 nA typical · p. 1
- Output accuracy
- 1.5% over temperature · p. 1
- Enable
- Smart enable pulldown · p. 1
Around it
2- cap 1 µF
- between IN and GND; Recommended nominal input capacitance; use ceramic and place close to IN. · p. 5
- cap 1 µF
- between OUT and GND; Recommended nominal output capacitance; use ceramic and place close to OUT. Minimum effective capacitance for stability is 0.5 uF; maximum derated capacitance is 22 uF. · p. 5
Specifications
48| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | Over operating free-air temperature range | min -0.3 · max 6.5 V | 4 |
| Voltage VEN | Over operating free-air temperature range | min -0.3 · max 6.5 V | 4 |
| Voltage VOUT | Maximum is VIN + 0.3 V or 5.5 V, whichever is smaller | min -0.3 V | 4 |
| Temperature TJ | Operating junction | min -40 · max 150 °C | 4 |
| Temperature Tstg | Storage | min -65 · max 150 °C | 4 |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±1000 V | max 1000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±500 V | max 500 V | 4 |
| Input voltage VIN | Over operating junction temperature range | min 1.5 · max 6 V | 5 |
| Enable voltage VEN | min 0 · max 6 V | 5 | |
| Output voltage VOUT | min 0.8 · max 5 V | 5 | |
| Output current IOUT | min 0 · max 200 mA | 5 | |
| Input capacitor CIN | Nominal value | typ 1 uF | 5 |
| Output capacitor(1) (2) COUT | Effective output capacitance of 0.5 uF minimum required for stability; 22 uF maximum derated capacitance | min 1 · typ 1 · max 22 uF | 5 |
| EN toggle frequency FEN | max 10 kHz | 5 | |
| Operating junction temperature TJ | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | DBV (SOT-23-5), 5 PINS | typ 181.9 °C/W | 5 |
| Junction-to-case(top) thermal resistance RθJC(top) | DBV (SOT-23-5), 5 PINS | typ 53 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DBV (SOT-23-5), 5 PINS | typ 88.1 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DBV (SOT-23-5), 5 PINS | typ 27.1 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DBV (SOT-23-5), 5 PINS | typ 52.7 °C/W | 5 |
| Nominal accuracy | TJ = 25°C, VOUT ≥ 1.5 V, 1 uA ≤ IOUT ≤ 1 mA | min -1 · max 1 % | 6 |
| Accuracy over temperature | VOUT ≥ 1.5 V, TJ = –40°C to +125°C | min -1.5 · max 1.5 % | 6 |
| Line regulation ΔVOUT(ΔVIN) | VOUT(nom) + 0.5 V ≤ VIN ≤ 6.0 V, TJ = –40°C to +125°C | max 5 mV | 6 |
| Load regulation(2) ΔVOUT(ΔIOUT) | 1 mA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + 0.5 V, TJ = –40°C to +85°C | typ 20 · max 38 mV | 6 |
| Load regulation(2) ΔVOUT(ΔIOUT) | 1 mA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + 0.5 V, TJ = –40°C to +125°C | max 50 mV | 6 |
| Ground current IGND | IOUT = 0 mA, TJ = 25°C | typ 25 · max 46 nA | 6 |
| Ground current IGND | IOUT = 0 mA, TJ = –40°C to +85°C | max 60 nA | 6 |
| Ground current vs load current IGND/IOUT | 5 uA ≤ IOUT < 1 mA, TJ = 25°C | typ 1 % | 6 |
| Ground current vs load current IGND/IOUT | 1 mA ≤ IOUT < 100 mA, TJ = 25°C | typ 0.25 % | 6 |
| Ground current vs load current IGND/IOUT | IOUT ≥ 100 mA, TJ = 25°C | typ 0.15 % | 6 |
| Ground current in dropout(3) IGND(DO) | IOUT = 0 mA, VIN = 95% x VOUT (NOM), TJ = 25°C | typ 25 nA | 6 |
| Shutdown current ISHDN | VEN = 0 V, 1.5 V ≤ VIN ≤ 5.0 V, TJ = 25°C | typ 3 · max 10 nA | 6 |
| Output current limit ICL | VOUT = 90% × VOUT(nom), VOUT < 2.5V, VIN = VOUT(nom) + VDO(max) + 1.0 V | min 240 · typ 450 · max 750 mA | 6 |
| Short-circuit current limit ISC | VOUT = 0 V | typ 65 mA | 6 |
| Dropout voltage(4) VDO | TJ = –40°C to +85°C, 1.8 V ≤ VOUT < 2.5 V, IOUT = 200 mA | max 400 mV | 6 |
| Dropout voltage(4) VDO | TJ = –40°C to +125°C, 1.8 V ≤ VOUT < 2.5 V, IOUT = 200 mA | max 450 mV | 6 |
| Power-supply rejection ratio PSRR | f = 1 kHz, IOUT = 30 mA | typ 55 dB | 6 |
| UVLO threshold VUVLO | VIN rising | min 1.23 · typ 1.3 · max 1.47 V | 6 |
| UVLO threshold VUVLO | VIN falling | min 1 · typ 1.12 · max 1.41 V | 6 |
| UVLO hysteresis VUVLO(HYST) | VIN hysteresis | typ 180 mV | 6 |
| EN pin logic high voltage VEN(HI) | min 1.1 V | 7 | |
| EN pin logic low voltage VEN(LOW) | max 0.3 V | 7 | |
| EN pin leakage current IEN | VEN = VIN = 6.0 V | typ 10 nA | 7 |
| Smart enable pulldown resistor REN(PULLDOWN) | VEN = 0.3 V | typ 500 KΩ | 7 |
| Pulldown resistor RPULLDOWN | VIN = 3.3 V, device disabled | typ 60 Ω | 7 |
| Thermal shutdown temperature TSD(shutdown) | Shutdown, temperature increasing | typ 170 °C | 7 |
| Thermal shutdown reset temperature TSD(reset) | Reset, temperature decreasing | typ 145 °C | 7 |
| Start-up time tSTR | From EN assertion to VOUT = 90% × VOUT(nom), 1.5V < VOUT ≤ 3.0 V | typ 750 · max 1200 us | 7 |
Pins, by the datasheet
5- 1 IN
- Input supply; place the recommended or larger ceramic capacitor from IN to ground close to the pin. · p. 3
- 2 GND
- Ground pin; connect to ground on the board. · p. 3
- 3 EN
- High enables the device; low or floating disables it. Internal pulldown disconnects when driven high externally after startup. · p. 3
- 4 NC
- Not internally connected; connect to ground or leave floating. · p. 3
- 5 OUT
- Regulated output; requires at least 0.5-uF effective capacitance to ground for stability. Place a 1-uF or larger ceramic capacitor close to the output for best transient response. · p. 3
Parts like it
8AP2112K-1.8TRG1
SOT-25-40℃~+85℃@(Ta) 1 1.8V 500mV@(600mA) 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsME6211C18M5G-N
SOT-23-5-40℃~+150℃@(Ta) 1 1.8V 200mV@(100mA)、400mV@(200mA) 300mA 30uA 50uVrms 6V 70dB@(1kHz) Enable、Short Circuit Protection Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRT9078-18GJ5
TSOT-23-5-40℃~+85℃@(Ta) 1 1.8V 2uA 300mA 300mV@(300mA) 48uVrms 5.5V 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS7A2018PDBV
SOT-23-5L-40℃~+125℃@(Tj) 1 1.8V 10uVrms 200mV@(300mA) 300mA 6.5uA 6V 92dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAP2127K-1.8TRG1
SOT-23-5-40℃~+85℃@(Ta) 1 1.8V 300mA 600mV@(300mA) 60uA 60uVrms 68dB@(1kHz) 6V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSPX3819M5-L-1-8/TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 20V 340mV@(500mA) 40uVrms 500mA 70dB 90uA Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRT9013-18GB
SOT-23-5-40℃~+85℃@(Ta) 1 1.8V 500mA 50uVrms 60uA 70dB@(1kHz) 7V Enable Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TPS7A0218PDBV?
Yes. The symbol is Gekkio_Regulator_Linear:TPS7A0218PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS7A0218PDBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the TPS7A0218PDBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS7A0218PDBV?
JLCPCB lists it as part C3748843, with 3,449 in stock; the sellers' links on this page open their listings.
What can replace the TPS7A0218PDBV?
Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.