TPS767D301MPWPREP
Texas InstrumentsExtended
-55℃~+125℃@(Tj) 1.5V~5.5V、3.3V 10V 1A、1A 2 350mV@(1A) 55uVrms 60dB@(1kHz) 85uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive HTSSOP-28-EP-4.5mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TPS767D301MPWPREP
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- HTSSOP-28-EP-4.5mm
- Pins
- 29
- In stock
- 1 at JLCPCB (C94198)
Overview
The TPS767D301MPWPREP is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a HTSSOP-28-EP-4.5mm package with 29 pins. -55℃~+125℃@(Tj) 1.5V~5.5V、3.3V 10V 1A、1A 2 350mV@(1A) 55uVrms 60dB@(1kHz) 85uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive HTSSOP-28-EP-4.5mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS767D325PWPG4, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C94198).
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | NC | Unspecified |
| 2 | NC | Unspecified |
| 3 | 1GND | Unspecified |
| 4 | 1EN# | Unspecified |
| 5 | 1IN | Unspecified |
| 6 | 1IN | Unspecified |
| 7 | NC | Unspecified |
| 8 | NC | Unspecified |
| 9 | 2GND | Unspecified |
| 10 | 2EN# | Unspecified |
| 11 | 2IN | Unspecified |
| 12 | 2IN | Unspecified |
| 13 | NC | Unspecified |
| 14 | NC | Unspecified |
| 15 | NC | Unspecified |
| 16 | NC | Unspecified |
| 17 | 2OUT | Unspecified |
| 18 | 2OUT | Unspecified |
| 19 | NC | Unspecified |
| 20 | NC | Unspecified |
| 21 | NC | Unspecified |
| 22 | 2RESET# | Unspecified |
| 23 | 1OUT | Unspecified |
| 24 | 1OUT | Unspecified |
| 25 | 1FB/NC | Unspecified |
| 26 | NC | Unspecified |
| 27 | NC | Unspecified |
| 28 | 1RESET# | Unspecified |
| 29 | EP | Unspecified |
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the TPS767D301MPWPREP?
Yes. The symbol is EasyEDA_Cloud:TPS767D325PWPG4 and the footprint EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS767D301MPWPREP?
HTSSOP-28-EP-4.5mm, with 29 pins. Its footprint is drawn on this page.
Where is the TPS767D301MPWPREP datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS767D301MPWPREP?
JLCPCB lists it as part C94198, with 1 in stock; the sellers' links on this page open their listings.
What can replace the TPS767D301MPWPREP?
Parts like it in the library: the TPS767D301PWPR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.