TPS73533DRV
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 13.2uVrms 280mV@(500mA) 3.3V 45uA 500mA 6.5V 68dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TPS73533DRV
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- WSON-6-EP(2x2)
- Pins
- 7
- In stock
- 275 at JLCPCB (C2868985)
Overview
The TPS73533DRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 13.2uVrms 280mV@(500mA) 3.3V 45uA 500mA 6.5V 68dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS73533DRVT, from EasyEDA) and its footprint (EasyEDA_Cloud:WSON-6_L2.0-W2.0-P0.65-TL-EP, from EasyEDA), ready for a KiCad board. 275 are in stock at JLCPCB (part C2868985).
Symbol
Footprint
From the datasheet
15- Supply, least
- 2.7 V · VIN, recommended operating min · p. 5
- Supply, most
- 6.5 V · VIN, recommended operating max · p. 5
- Supply, absolute maximum
- 7 V · VIN, absolute max · p. 5
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 125 °C · Operating free-air temperature max · p. 5
- Junction, hottest
- 150 °C · Operating junction temperature absolute max · p. 5
- Takes working
- 45 µA · Ground pin current typical, 10 mA ≤ IOUT ≤ 500 mA · p. 7
- Takes asleep
- 150 nA · Shutdown current typical, VEN ≤ 0 V · p. 7
- Gives
- 500 mA · Output current max, recommended operating · p. 5
- Current limit
- 1.17 A · Output current limit typical · p. 7
- Dropout
- 280 mV · Dropout voltage typical at IOUT = 500 mA · p. 7
- Junction to air (DRV (WSON))
- 65.1 K/W · Junction-to-ambient thermal resistance · p. 6
- Junction to board (DRV (WSON))
- 34.7 K/W · Junction-to-board thermal resistance · p. 6
- Junction to case (DRV (WSON))
- 85.6 K/W · Junction-to-case top thermal resistance · p. 6
- Junction, hottest
- 125 °C · Junction temperature max for reliable operation · p. 12
What it is and has
8- Regulator
- 500-mA low-dropout regulator with enable · p. 1
- PSRR
- 68 dB at 1 kHz · p. 1
- Output noise
- 13.2 μVRMS · p. 1
- Protection
- Thermal and overcurrent protection · p. 10
- Package
- WSON (6), 2.00 mm × 2.00 mm · p. 1
- Protection
- Internal current limit · p. 11
- Protection
- Thermal shutdown at approximately 165°C · p. 12
- Enable
- Active high, compatible with standard and low-voltage TTL-CMOS levels · p. 11
Around it
6- cap 0.1-µF to 1-µF
- between IN and GND; Low ESR; required near the device. · p. 4
- cap 2.2-μF
- between OUT and GND; Ceramic; required for stability; minimum output capacitance is 2 uF. · p. 4
- cap 0.01 μF
- between NR and GND; Optional noise bypass capacitor; maximum recommended capacitance. · p. 4
- cap 0.1-μF to 1-μF
- between IN and GND; Optional low-ESR input capacitor across the supply, near the regulator. · p. 14
- cap 2 μF or larger
- between OUT and GND; Output capacitor; X5R or X7R preferred, maximum ESR < 1 Ω. · p. 14
- cap 10-nF
- between NR and GND; Optional noise-reduction capacitor. Use low leakage; COG-type (NPO) ceramic is recommended for abrupt temperature changes. · p. 14
Specifications
44| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | With respect to GND | min -0.3 · max 7 V | 5 |
| Voltage VEN | With respect to GND; maximum VIN + 0.3 V | min -0.3 V | 5 |
| Voltage VFB | With respect to GND | min -0.3 · max 1.6 V | 5 |
| Voltage VOUT | With respect to GND; maximum VIN + 0.3 V | min -0.3 V | 5 |
| Operating junction temperature TJ | min -40 · max 150 °C | 5 | |
| Storage temperature Tstg | min -55 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; rated ±2000 V | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; rated ±500 V | max 500 V | 5 |
| Input voltage VIN | Over operating junction temperature range | min 2.7 · max 6.5 V | 5 |
| Output voltage VOUT | Minimum VFB | max 6 V | 5 |
| Output current IOUT | When operating at TJ near 125°C, IOUT(min) is 500 uA | min 0 · max 500 mA | 5 |
| Operating free-air temperature TA | min -40 · max 125 °C | 5 | |
| Input capacitor CIN | Nominal value | typ 1 uF | 5 |
| Output capacitor COUT | Nominal value | typ 2 uF | 5 |
| Noise reduction capacitor CNR | Nominal value | typ 10 nF | 5 |
| Junction-to-ambient thermal resistance RθJA | DRV (WSON), 6 pins | typ 65.1 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | DRV (WSON), 6 pins | typ 85.6 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | DRV (WSON), 6 pins | typ 34.7 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | DRV (WSON), 6 pins | typ 1.6 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | DRV (WSON), 6 pins | typ 35.1 °C/W | 6 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | DRV (WSON), 6 pins | typ 5.8 °C/W | 6 |
| Input voltage VIN | Minimum VIN = VOUT + VDO or 2.7 V, whichever is greater | min 2.7 · max 6.5 V | 7 |
| DC output accuracy | 1 mA ≤ IOUT ≤ 500 mA; VOUT + 0.5 V ≤ VIN < 6.5 V; VOUT > 2.2 V; typical ±1% | min -2 · max 2 % | 7 |
| Line regulation ΔVOUT(ΔVIN) | VOUT(nom) + 0.5 V ≤ VIN ≤ 6.5 V | typ 0.02 %/V | 7 |
| Load regulation ΔVOUT(ΔIOUT) | 500 uA ≤ IOUT ≤ 500 mA | typ 0.005 %/mA | 7 |
| Dropout voltage VDO | VIN = VOUT(nom) – 0.1 V; IOUT = 500 mA | typ 280 · max 500 mV | 7 |
| Output current limit ILIM | VOUT = 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.9 V; VIN ≥ 2.7 V | min 800 · typ 1170 · max 1900 mA | 7 |
| Ground pin current IGND | 10 mA ≤ IOUT ≤ 500 mA | typ 45 · max 65 uA | 7 |
| Shutdown current ISHDN | VEN ≤ 0 V | typ 0.15 · max 1 uA | 7 |
| Power-supply rejection ratio PSRR | VIN = 3.85 V; VOUT = 2.85 V; CNR = 0.01 uF; IOUT = 100 mA; f = 100 Hz | typ 66 dB | 7 |
| Power-supply rejection ratio PSRR | VIN = 3.85 V; VOUT = 2.85 V; CNR = 0.01 uF; IOUT = 100 mA; f = 1k Hz | typ 68 dB | 7 |
| Power-supply rejection ratio PSRR | VIN = 3.85 V; VOUT = 2.85 V; CNR = 0.01 uF; IOUT = 100 mA; f = 10 kHz | typ 44 dB | 7 |
| Power-supply rejection ratio PSRR | VIN = 3.85 V; VOUT = 2.85 V; CNR = 0.01 uF; IOUT = 100 mA; f = 100 kHz | typ 22 dB | 7 |
| Start-up time tSTR | CNR = none | typ 45 us | 7 |
| Start-up time tSTR | CNR = 1 nF | typ 45 us | 7 |
| Start-up time tSTR | CNR = 10 nF | typ 50 us | 7 |
| Start-up time tSTR | CNR = 47 nF | typ 50 us | 7 |
| Enable high (enabled) VEN(HI) | min 1.2 V | 7 | |
| Enable low (shutdown) VEN(LO) | max 0.4 V | 7 | |
| Enable pin current, enabled IEN(HI) | VEN = VIN = 6.5 V | typ 0.03 · max 1 uA | 7 |
| Thermal shutdown temperature Tsd | Shutdown, temperature increasing | typ 165 °C | 7 |
| Thermal shutdown temperature Tsd | Reset, temperature decreasing | typ 145 °C | 7 |
| Undervoltage lockout UVLO | VIN rising | min 1.9 · typ 2.2 · max 2.65 V | 7 |
| Hysteresis Vhys | VIN falling | typ 70 mV | 7 |
Pins, by the datasheet
7- 1 OUT
- Regulator output; requires a 2.2-uF ceramic capacitor to ground, with at least 2 uF for stability. · p. 4
- 2 NR
- Fixed-version noise bypass pin; an external capacitor reduces reference noise, with a maximum recommended capacitance of 0.01 uF. · p. 4
- 3 GND
- Ground; the thermal pad must be tied to GND. · p. 4
- 4 EN
- High enables the regulator; low selects shutdown; connect to IN if unused. · p. 4
- 5 NC
- Not internally connected. · p. 4
- 6 IN
- Input supply; place a 0.1-uF to 1-uF low ESR capacitor to ground near the device. · p. 4
- Thermal pad Thermal pad
- Must be tied to GND. · p. 4
Parts like it
8LP5912Q3.3DRVRQ1
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 12uVrms 180mV@(500mA) 3.3V 30uA 500mA 6.5V 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS7A2633DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 18V 2uA 3.3V 300uVrms 500mA 52dB@(1kHz) 590mV@(500mA) Fixed Over Current Protection、Thermal Shutdown、Operating status indication Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74633PCQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 1A 25uA 265mV@(1A) 3.3V 38dB@(100kHz) 53uVrms 6V Fixed PG Pin、Over Current Protection、Over Temperature Protection Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS73733DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1A 3.3V 5.5V 500mV@(1A) 58dB@(100Hz) 89.1uVrms Fixed Over Current Protection、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74533PCQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 160mV@(500mA) 25uA 3.3V 45dB@(100kHz) 500mA 53uVrms 6V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Output discharge Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP5912Q3.3DRVTQ1
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 12uVrms 180mV@(500mA) 3.3V 30uA 500mA 6.5V 75dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Output discharge、Reverse-polarity current protection、Built-in soft-start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74633PQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 1A 25uA 265mV@(1A) 3.3V 38dB@(100kHz) 53uVrms 6V Fixed Positive Under Voltage Lockout、PG Pin、Over Current Protection、Over Temperature Protection WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TPS73533DRV?
Yes. The symbol is EasyEDA_Cloud:TPS73533DRVT and the footprint EasyEDA_Cloud:WSON-6_L2.0-W2.0-P0.65-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS73533DRV?
WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.
Where is the TPS73533DRV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS73533DRV?
JLCPCB lists it as part C2868985, with 275 in stock; the sellers' links on this page open their listings.
What can replace the TPS73533DRV?
Parts like it in the library: the LP5912Q3.3DRVRQ1 by Texas Instruments, the TPS7A2633DRV by Texas Instruments, the TPS74633PCQWDRVRQ1 by Texas Instruments and the TPS73733DRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.