TPS63805YFF
Texas InstrumentsExtended
-40℃~+125℃@(TJ) 1 1.3V~5.5V 1.4MHz、1.6MHz、2.1MHz 1.8V~5.2V 11uA 2A Adjustable Buck-Boost Buck-Boost Built-in Yes DSBGA-15 DC-DC Converters ROHS
- Part id
- ti/TPS63805YFF
- Category
- DC DC Converters
- Package
- DSBGA-15
- Pins
- 15
- In stock
- 5,349 at JLCPCB (C2879615)
Overview
The TPS63805YFF is a DC DC Converter made by Texas Instruments in a DSBGA-15 package with 15 pins. -40℃~+125℃@(TJ) 1 1.3V~5.5V 1.4MHz、1.6MHz、2.1MHz 1.8V~5.2V 11uA 2A Adjustable Buck-Boost Buck-Boost Built-in Yes DSBGA-15 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS63807YFFR, from EasyEDA) and its footprint (EasyEDA_Cloud:DSBGA-15_L2.3-W1.3-R5-C3-P0.40-TL, from EasyEDA), ready for a KiCad board. 5,349 are in stock at JLCPCB (part C2879615).
Symbol
Footprint
From the datasheet
16- Supply, least
- 1.3 V · VIN, recommended operating min after startup; startup requires >1.8 V · p. 4
- Supply, most
- 5.5 V · VIN, recommended operating max · p. 4
- Supply, absolute maximum
- 6 V · VIN, absolute maximum · p. 4
- Junction, hottest
- 150 °C · junction temperature, absolute maximum · p. 4
- Takes working
- 11 µA · VIN quiescent current typical, enabled, 3.6 V input, 3.3 V output, not switching · p. 6
- Takes asleep
- 45 nA · VIN shutdown current typical, EN low, VIN = 3.6 V · p. 6
- Gives
- 2 A · rated output, VI ≥ 2.3 V, VO = 3.3 V · p. 1
- Current limit
- 5 A · peak inductor current limit typical, boost mode · p. 6
- Current limit
- 3.8 A · peak inductor current limit typical, buck mode · p. 6
- Feedback reference
- 500 mV · feedback regulation voltage typical · p. 6
- Switches at
- 2.1 MHz · typical boost mode, VIN = 2.3 V, VOUT = 3.3 V, no load, forced PWM · p. 7
- Switches at
- 1.4 MHz · typical buck-boost mode, VIN = VOUT = 3.3 V, no load, forced PWM · p. 7
- Switches at
- 1.6 MHz · typical buck mode, VIN = 4.3 V, VOUT = 3.3 V, no load, forced PWM · p. 7
- Junction to air (3x5 Ball WCSP)
- 78.8 K/W · junction-to-ambient thermal resistance · p. 4
- Junction to case (3x5 Ball WCSP)
- 0.6 K/W · junction-to-case top thermal resistance · p. 4
- Junction to board (3x5 Ball WCSP)
- 19.5 K/W · junction-to-board thermal resistance · p. 4
What it is and has
9- Output voltage
- 1.8 V to 5.2 V, adjustable · p. 1
- Operating modes
- Power save mode and forced PWM · p. 1
- Control architecture
- Peak-current buck-boost · p. 1
- Reverse current
- Forward and reverse current operation · p. 1
- Prebiased startup
- Supported · p. 1
- Soft start
- Integrated · p. 1
- Protection
- Overtemperature and overvoltage · p. 1
- Shutdown
- True shutdown with load disconnect · p. 1
- Current protection
- Forward and reverse current limits · p. 1
Around it
5- ind 0.47 µH
- between L1 and L2; Typical application inductor. · p. 1
- cap 4 μF minimum, 5 μF nominal effective capacitance
- between VIN and GND; Recommended effective input capacitance. · p. 4
- cap 10 μF minimum effective capacitance
- between VOUT and GND; TPS63805; 1.8 V ≤ VO ≤ 2.3 V. · p. 4
- cap 7 µF minimum, 8.2 µF nominal effective capacitance
- between VOUT and GND; TPS63805; VO > 2.3 V. · p. 4
- res <100 kΩ
- between FB and GND; Low-side feedback divider resistor; choose high-side resistor for desired output voltage. · p. 12
Specifications
56| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage(2) | VIN, L1, L2, EN, MODE, VOUT, FB, PG; over junction temperature range | min -0.3 · max 6 V | 4 |
| Voltage(2) | L1, L2 (AC, less than 10 ns) | min -3 · max 9 V | 4 |
| Operating junction temperature TJ | min -40 · max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V rating | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±500 V rating | max 500 V | 4 |
| Input voltage VI | Minimum start-up voltage of VI > 1.8 V until power good | min 1.3 · max 5.5 V | 4 |
| Output voltage VO | min 1.8 · max 5.2 V | 4 | |
| Effective capacitance connected to VIN CI | Nominal value in typ field | min 4 · typ 5 uF | 4 |
| Effective inductance L | Nominal value in typ field | min 0.37 · typ 0.47 · max 0.57 uH | 4 |
| TPS63805/TPS63807 Effective capacitance connected to VOUT CO | TPS63805; 1.8 V ≤ VO ≤ 2.3 V | min 10 uF | 4 |
| TPS63805/TPS63807 Effective capacitance connected to VOUT CO | TPS63805; VO > 2.3 V; nominal value in typ field | min 7 · typ 8.2 uF | 4 |
| Operating junction temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RΘJA | TPS6380x; 3x5 Ball WCSP; 15 PINS | typ 78.8 °C/W | 4 |
| Junction-to-case (top) thermal resistance RΘJC(top) | TPS6380x; 3x5 Ball WCSP; 15 PINS | typ 0.6 °C/W | 4 |
| Junction-to-board thermal resistance RΘJB | TPS6380x; 3x5 Ball WCSP; 15 PINS | typ 19.5 °C/W | 4 |
| Junction-to-top characterization parameter ΨJT | TPS6380x; 3x5 Ball WCSP; 15 PINS | typ 0.3 °C/W | 4 |
| Junction-to-board characterization parameter ΨJB | TPS6380x; 3x5 Ball WCSP; 15 PINS | typ 19.5 °C/W | 4 |
| Minimum input voltage for full load, once started VIN;LOAD | IOUT = 2 A, VOUT = 3.3 V, TJ = 25°C | typ 2.3 V | 6 |
| Quiescent current into VIN IQ;VIN | TPS63805/TPS63807; TJ = 25°C, EN = VIN = 3.6 V, VOUT = 3.3 V, not switching | typ 11 uA | 6 |
| Shutdown current into VIN ISD | EN = low, -40°C ≤ TJ ≤ 85°C, VIN = 3.6 V, VOUT = 0 V | typ 45 · max 600 nA | 6 |
| Undervoltage lockout threshold UVLO | VIN falling, VOUT ≥ 1.8 V, once started | min 1.2 · typ 1.25 · max 1.29 V | 6 |
| Undervoltage lockout threshold UVLO | VIN rising | min 1.6 · typ 1.7 · max 1.79 V | 6 |
| Thermal shutdown TSD | Temperature rising | typ 150 °C | 6 |
| Thermal shutdown hysteresis TSD;HYST | typ 20 °C | 6 | |
| Soft-start, Current limit ramp time Tramp | TPS63805/TPS63806 TJ = 25°C, VIN = 3.6 V, VOUT = 3.3 V, IO = 3.5 A, time from first switching to power good | typ 224 us | 6 |
| Delay from EN-edge until rising VOUT Tdelay | TJ = 25°C, VIN = 3.6 V, VOUT = 3.3 V, Delay from EN-edge until rising first switching | typ 321 us | 6 |
| Threshold Voltage rising for EN-Pin VTHR;EN | min 1.07 · typ 1.1 · max 1.13 V | 6 | |
| Threshold Voltage falling for EN-Pin VTHF;EN | min 0.97 · typ 1 · max 1.03 V | 6 | |
| High-level input voltage VIH | EN, MODE | min 1.2 V | 6 |
| Low-level input voltage VIL | EN, MODE | max 0.4 V | 6 |
| Power Good threshold voltage VPG;rising | VOUT rising, referenced to VOUT nominal | typ 95 % | 6 |
| Power Good threshold voltage VPG;falling | VOUT falling, referenced to VOUT nominal | typ 90 % | 6 |
| Power Good low-level output voltage VPG;Low | ISINK = 1 mA | max 0.4 V | 6 |
| Power Good delay time tPG;delay | VFB falling | typ 14 us | 6 |
| Input leakage current Ilkg | typ 0.01 · max 0.2 uA | 6 | |
| Shutdown current into VOUT ISD | TPS63805/TPS63806 EN = low, -40°C ≤ TJ ≤ 85°C, VIN = 3.6 V, VOUT = 3.3 V; typical and maximum magnitudes printed with ± | typ 0.5 · max 600 nA | 6 |
| Feedback Regulation Voltage VFB | typ 500 mV | 6 | |
| Feedback Voltage accuracy VFB | PWM mode | min -1 · max 1 % | 6 |
| Overvoltage Protection Threshold | VOUT rising | min 5.5 · typ 5.7 · max 5.9 V | 6 |
| Overvoltage Protection Threshold | VIN rising | min 5.5 · typ 5.7 · max 5.9 V | 6 |
| Peak Inductor Current to enter PFM-Mode IPWM/PFM | VIN = 3.6 V; VOUT = 3.3 V | typ 1.06 A | 6 |
| Feedback Input Bias Current IFB | VFB = 500 mV | typ 5 · max 100 nA | 6 |
| Peak Current Limit, Boost Mode IPK | TPS63805/TPS63807; VIN ≥ 2.5 V | min 4 · typ 5 · max 5.75 A | 6 |
| Peak Current Limit, Buck-Boost Mode IPK | TPS63805/TPS63807; VIN ≥ 2.5 V | typ 5 A | 6 |
| Peak Current Limit, Buck Mode IPK | TPS63805/TPS63807; VIN ≥ 2.5 V | typ 3.8 A | 6 |
| Peak Current Limit for Reverse Operation IPK;Reverse | VI = 5 V, VO = 3.3 V | typ -0.9 A | 6 |
| High-side FET on-resistance Buck RDS;ON | VIN = 3 V, VOUT = 3.3 V; I(L2) = 0.19 A; IO = 0.5 A | typ 47 mΩ | 7 |
| Low-side FET on-resistance Buck RDS;ON | VIN = 3 V, VOUT = 3.3 V; I(L2) = 0.19 A; IO = 0.5 A | typ 30 mΩ | 7 |
| High-side FET on-resistance Boost RDS;ON | VIN = 3 V, VOUT = 3.3 V; I(L1) = 0.19 A; IO = 0.5 A | typ 43 mΩ | 7 |
| Low-side FET on-resistance Boost RDS;ON | VIN = 3 V, VOUT = 3.3 V; I(L1) = 0.19 A; IO = 0.5 A | typ 18 mΩ | 7 |
| Inductor Switching Frequency, Boost Mode fSW | VIN = 2.3V, VOUT = 3.3V, no Load, MODE = HIGH, TJ = 25°C | typ 2.1 MHz | 7 |
| Inductor Switching Frequency, Buck-Boost Mode fSW | VIN = 3.3V, VOUT = 3.3V, no Load, MODE = HIGH, TJ = 25°C | typ 1.4 MHz | 7 |
| Inductor Switching Frequency, Buck Mode fSW | VIN = 4.3, VOUT = 3.3V, no Load, MODE = HIGH, TJ = 25°C | typ 1.6 MHz | 7 |
| Line regulation | VIN = 2.4 V to 5.5 V, VOUT = 3.3V, IOUT = 2 A | typ 0.3 % | 7 |
| Load regulation | VIN= 3.6 V, VOUT = 3.3V, IOUT = 0 A to 2 A, forced-PWM mode | typ 0.1 % | 7 |
Pins, by the datasheet
15- A2 VIN
- Supply voltage. · p. 3
- A3 VIN
- Supply voltage. · p. 3
- B2 L1
- Connection for inductor. · p. 3
- B3 L1
- Connection for inductor. · p. 3
- A1 EN
- Device enable; HIGH enables and LOW disables. Must not float. · p. 3
- C2 GND
- Power ground. · p. 3
- C3 GND
- Power ground. · p. 3
- B1 MODE
- LOW selects power save mode; HIGH selects forced PWM mode. Must not float. · p. 3
- C1 AGND
- Analog ground. · p. 3
- D2 L2
- Connection for inductor. · p. 3
- D3 L2
- Connection for inductor. · p. 3
- E2 VOUT
- Power stage output. · p. 3
- E3 VOUT
- Power stage output. · p. 3
- D1 FB
- Voltage feedback sensing pin. · p. 3
- E1 PG
- Power good indicator; may float if unused. · p. 3
Parts like it
3TPS63806YFF
DSBGA-15(1.3x2.3)-40℃~+125℃@(TJ) 1 1.3V~5.5V 1.8V~5.2V 13uA 2.1MHz 2A Adjustable Buck-Boost Buck-Boost Built-in Yes DSBGA-15(1.3x2.3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS63807YFF
DSBGA-15-40℃~+125℃ 1 1.3V~5.5V 1.4MHz、1.6MHz、2.1MHz 1.8V~5.2V 11uA 2A Adjustable Buck-Boost Buck-Boost Built-in Yes DSBGA-15 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS63811YFF
DSBGA-15(1.3x2.3)-40℃~+85℃@(TA) 1 1.6MHz、2MHz、2.6MHz 1.8V~5.2V 13uA 2.2V~5.5V 2.5A Adjustable Buck-Boost Buck、Boost Built-in No DSBGA-15(1.3x2.3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS63805YFF?
Yes. The symbol is EasyEDA_Cloud:TPS63807YFFR and the footprint EasyEDA_Cloud:DSBGA-15_L2.3-W1.3-R5-C3-P0.40-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS63805YFF?
DSBGA-15, with 15 pins. Its footprint is drawn on this page.
Where is the TPS63805YFF datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS63805YFF?
JLCPCB lists it as part C2879615, with 5,349 in stock; the sellers' links on this page open their listings.
What can replace the TPS63805YFF?
Parts like it in the library: the TPS63806YFF by Texas Instruments, the TPS63807YFF by Texas Instruments and the TPS63811YFF by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.