Skip to the content

TPS61235PRWL

Texas Instruments

Part id
ti/TPS61235PRWL
Category
Uncategorised
Pins
9
Used on
3 open-source boards

Overview

The TPS61235PRWL is an uncategorised made by Texas Instruments with 9 pins.

PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:TI TPS61235PRWL, from Altium's library), ready for a KiCad board. 3 open-source boards in 1 repository on GitHub use it.

Symbol

1PGND5AGND9VOUT2SW6FB3VIN7EN4CC8INACT
Celestial_Power_Switchmode:TI TPS61235PRWLFrom Altium's library

Footprint

The library has no footprint for this part yet.

Pinout

9
The pins of the TPS61235PRWL
PinNameType
1PGNDPassive
2SWPassive
3VINPassive
4CCPassive
5AGNDPassive
6FBPassive
7ENPassive
8INACTPassive
9VOUTPassive

Open-source boards using it

3
  • 4 layers40.1 × 25 mmPower Supply and Charge Circuit, the printed circuit board in 3D

    Power Supply and Charge Circuit

    owenpmorgan/STM_Based_Electronic_Nose_Platform

    The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

    40 parts
  • 4 layers52 × 45 mmPower Supply and Charge Circuit, the printed circuit board in 3D

    Power Supply and Charge Circuit

    owenpmorgan/STM_Based_Electronic_Nose_Platform

    The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

    40 parts
  • 4 layers73.1 × 50 mmPower Supply and Charge Circuit, the printed circuit board in 3D

    Power Supply and Charge Circuit

    owenpmorgan/STM_Based_Electronic_Nose_Platform

    The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

    42 parts

Questions

Is there a KiCad symbol and footprint for the TPS61235PRWL?

Yes. The symbol is Celestial_Power_Switchmode:TI TPS61235PRWL, both drawn on this page. PCBKit places them on a board for you when you design with it.

Which open-source boards use the TPS61235PRWL?

3 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.