TPS61090RSA
Texas InstrumentsExtended
-40℃~+85℃@(TA) 1 1.8V~5.5V 1.8V~5.5V 20uA 600kHz Adjustable Boost Boost Built-in Yes QFN-16-EP(4x4) DC-DC Converters ROHS
- Part id
- ti/TPS61090RSA
- Category
- DC DC Converters
- Package
- QFN-16-EP(4x4)
- Pins
- 17
- In stock
- 2,382 at JLCPCB (C206167)
Overview
The TPS61090RSA is a DC DC Converter made by Texas Instruments in a QFN-16-EP(4x4) package with 17 pins. -40℃~+85℃@(TA) 1 1.8V~5.5V 1.8V~5.5V 20uA 600kHz Adjustable Boost Boost Built-in Yes QFN-16-EP(4x4) DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61090, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_RSA_VQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm, from KiCad's library), ready for a KiCad board. 2,382 are in stock at JLCPCB (part C206167).
Symbol
Footprint
From the datasheet
13- Supply, least
- 1.8 V · VBAT, recommended operating min · p. 4
- Supply, most
- 5.5 V · VBAT, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VBAT, absolute maximum · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 4
- Works up to
- 85 °C · Operating free-air temperature max · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute maximum · p. 4
- Takes working
- 20 µA · sum of VBAT and VOUT quiescent currents, typical, no load, VBAT = 1.8 V, VOUT = 5 V · p. 5
- Takes asleep
- 100 nA · Shutdown current typical, VEN = 0 V, VBAT = 2.4 V · p. 5
- Current limit
- 2.2 A · Switch current limit typical, VOUT = 5 V · p. 4
- Feedback reference
- 500 mV · TPS61090 feedback voltage typical · p. 4
- Switches at
- 600 kHz · Oscillator frequency typical · p. 4
- Gives
- 500 mA · rated output current from 1.8-V input · p. 1
- Junction to air (QFN PowerPAD package (RSA))
- 38.1 K/W · junction to ambient, PowerPAD soldered and board layout optimized · p. 20
What it is and has
9- Package
- 16-pin VQFN, 4 x 4 · p. 1
- Power save mode
- Improved efficiency at low output power · p. 1
- Low battery comparator
- Integrated · p. 1
- Antiringing switch
- Integrated, low EMI · p. 1
- Shutdown
- Load disconnect · p. 1
- Protection
- Over-temperature protection · p. 1
- Converter
- Synchronous boost converter with 2-A switch · p. 1
- Output voltage adjustment
- External resistor divider · p. 14
- Low battery detector
- 500 mV threshold at LBI · p. 12
Around it
8- res 200 kΩ
- between FB and GND; R4 feedback divider resistor; recommended approximate value for internal compensation. · p. 14
- res 1.8 MΩ
- between VOUT and FB; R3 example for a 5.0 V output. · p. 14
- res 1 MΩ
- between LBO and pullup supply; Low battery output pullup; pullup supply must not exceed VOUT. · p. 14
- ind 5.5 µH
- between VBAT and SW; Calculated inductor value for the application example. · p. 15
- cap 10 µF
- between VBAT and GND; Minimum recommended input capacitance; ceramic or tantalum. · p. 15
- cap 100 nF
- between VBAT and GND; Ceramic capacitor in parallel with a tantalum input capacitor; place close to the IC. · p. 15
- cap 100 µF
- between VOUT and PGND; Approximate output capacitance for the example, typically tantalum; control loop optimized for ESR above 30 mΩ. · p. 15
- cap 10 pF
- between VOUT and FB; Parallel to R3 to improve small signal stability with low ESR output capacitors. · p. 16
Specifications
36| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input voltage on LBI | over operating free-air temperature range | min -0.3 · max 3.6 V | 4 |
| Input voltage on SW, VOUT, LBO, VBAT, SYNC, EN, FB | over operating free-air temperature range | min -0.3 · max 7 V | 4 |
| Operating free air temperature TA | min -40 · max 85 °C | 4 | |
| Maximum junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±1000 V | max 1000 V | 4 |
| Supply voltage at VBAT VI | min 1.8 · max 5.5 V | 4 | |
| Inductance L | typ field represents NOM | min 2.2 · typ 6.8 uH | 4 |
| Input, capacitance Ci | typ field represents NOM | typ 10 uF | 4 |
| Output capacitance Co | typ field represents NOM | min 22 · typ 100 uF | 4 |
| Operating free air temperature TA | min -40 · max 85 °C | 4 | |
| Operating virtual junction temperature TJ | min -40 · max 125 °C | 4 | |
| Input voltage range VI | min 1.8 · max 5.5 V | 4 | |
| TPS61090 output voltage range VO | TPS61090 | min 1.8 · max 5.5 V | 4 |
| TPS61090 feedback voltage VFB | TPS61090 | min 490 · typ 500 · max 510 mV | 4 |
| Oscillator frequency f | min 500 · typ 600 · max 700 kHz | 4 | |
| Frequency range for synchronization | min 500 · max 700 kHz | 4 | |
| Switch current limit ISW | VOUT= 5 V | min 2000 · typ 2200 · max 2500 mA | 4 |
| Boost switch on resistance | VOUT= 5 V | typ 55 mΩ | 4 |
| Rectifying switch on resistance | VOUT= 5 V | typ 55 mΩ | 4 |
| Total accuracy | min -3 · max 3 % | 4 | |
| Line regulation | max 0.6 % | 4 | |
| Load regulation | max 0.6 % | 4 | |
| Quiescent current | into VBAT; IO = 0 mA, VEN = VBAT = 1.8 V, VOUT =5 V | typ 10 · max 25 uA | 5 |
| Quiescent current | into VOUT; IO = 0 mA, VEN = VBAT = 1.8 V, VOUT = 5 V | typ 10 · max 20 uA | 5 |
| Shutdown current | VEN= 0 V, VBAT = 2.4 V | typ 0.1 · max 1 uA | 5 |
| Under voltage lockout threshold VUVLO | VLBI voltage decreasing | typ 1.5 V | 5 |
| LBI voltage threshold VIL | VLBI voltage decreasing | min 490 · typ 500 · max 510 mV | 5 |
| LBI input hysteresis | typ 10 mV | 5 | |
| LBI input current | EN = VBAT or GND | typ 0.01 · max 0.1 uA | 5 |
| LBO output low voltage | VO = 3.3 V, IOI = 100 uA | typ 0.04 · max 0.4 V | 5 |
| LBO output low current | typ 100 uA | 5 | |
| LBO output leakage current | VLBO = 7 V | typ 0.01 · max 0.1 uA | 5 |
| EN, SYNC input current | Clamped on GND or VBAT | typ 0.01 · max 0.1 uA | 5 |
| Overtemperature protection | typ 140 °C | 5 |
Pins, by the datasheet
17- 1 VOUT
- DC-DC output. · p. 3
- 2 NC
- Not connected. · p. 3
- 3 SW
- Boost and rectifying switch input. · p. 3
- 4 SW
- Boost and rectifying switch input. · p. 3
- 5 PGND
- Power ground. · p. 3
- 6 PGND
- Power ground. · p. 3
- 7 PGND
- Power ground. · p. 3
- 8 VBAT
- Supply voltage. · p. 3
- 9 LBI
- Low battery comparator input; comparator enabled with EN. · p. 3
- 10 SYNC
- Power save mode disabled at VBAT, enabled at GND; accepts a clock signal for synchronization. · p. 3
- 11 EN
- Enable input; VBAT enables, GND disables. · p. 3
- 12 LBO
- Low battery comparator output. · p. 3
- 13 GND
- Control/logic ground. · p. 3
- 14 FB
- Voltage feedback of adjustable versions. · p. 3
- 15 VOUT
- DC-DC output. · p. 3
- 16 VOUT
- DC-DC output. · p. 3
- — PowerPAD™
- Must be soldered for appropriate power dissipation; should be connected to PGND. · p. 3
Ordering codes, by the datasheet
4- TPS61090RSA
- 16-pin VQFN 4 mm × 4 mm · Adjustable output voltage · p. 3
- TPS61090RSAR
- QFN (RSA), 16 pins · 3000-piece large tape and reel; operating temperature -40 to 125 °C · p. 22
- TPS61090RSAR.B
- QFN (RSA), 16 pins · 3000-piece large tape and reel; operating temperature -40 to 125 °C · p. 22
- TPS61090RSARG4
- QFN (RSA), 16 pins · 3000-piece large tape and reel; operating temperature -40 to 85 °C · p. 22
Parts like it
2TPS61091RSA
QFN-16-EP(4x4)-40℃~+85℃@(TA) 1 1.8V~5.5V 3.3V 600kHz Boost Boost Built-in Fixed Yes QFN-16-EP(4x4) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS61092RSA
QFN-16-EP(4x4)-40℃~+85℃@(TA) 1 1.8V~5.5V 25uA 5V 600kHz Boost Boost Built-in Fixed Yes QFN-16-EP(4x4) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS61090RSA?
Yes. The symbol is Regulator_Switching:TPS61090 and the footprint Package_DFN_QFN:Texas_RSA_VQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS61090RSA?
QFN-16-EP(4x4), with 17 pins. Its footprint is drawn on this page.
Where is the TPS61090RSA datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS61090RSA?
JLCPCB lists it as part C206167, with 2,382 in stock; the sellers' links on this page open their listings.
What can replace the TPS61090RSA?
Parts like it in the library: the TPS61091RSA by Texas Instruments and the TPS61092RSA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.