TPS61007DGSR
Texas InstrumentsExtended
-40℃~+125℃@(TJ) 1 1.5V~3.3V 100mA 44uA 500kHz 800mV~3.3V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、External compensation MSOP-10 DC-DC Converters ROHS
- Part id
- ti/TPS61007DGSR
- Category
- DC DC Converters
- Package
- MSOP-10
- Pins
- 10
- In stock
- 0 at JLCPCB (C3745756)
Overview
The TPS61007DGSR is a DC DC Converter made by Texas Instruments in a MSOP-10 package with 10 pins. -40℃~+125℃@(TJ) 1 1.5V~3.3V 100mA 44uA 500kHz 800mV~3.3V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、External compensation MSOP-10 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS61007DGSR, from EasyEDA) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3745756).
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | EN | Unspecified |
| 2 | COMP | Unspecified |
| 3 | FB | Unspecified |
| 4 | GND | Unspecified |
| 5 | VOUT | Unspecified |
| 6 | VBAT | Unspecified |
| 7 | SW | Unspecified |
| 8 | FBGND | Unspecified |
| 9 | LBI | Unspecified |
| 10 | LBO | Unspecified |
Parts like it
8LT1945EMS#TRPBF
MSOP-100℃~+70℃@(TJ) 1.23V~34V 1.2V~15V 2 20uA 250mA Adjustable Boost、SEPIC Built-in No MSOP-10 DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLTC3440EMS#TRPBF
MSOP-10-40℃~+85℃ 1 2.5V~5.5V 2.5V~5.5V 25uA 300kHz~2MHz 600mA Adjustable Buck-Boost Buck-Boost Built-in Yes MSOP-10 DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersMCP1258-E/UN
MSOP-10MSOP-10 Charge Pumps ROHSMicrochip TechnologyDC-DC ConvertersMIC2176-2YMM
MSOP-10-40℃~+125℃@(TJ) 1 200kHz 4.5V~75V Buck Buck External Yes MSOP-10 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersLM5006MM
MSOP-10-40℃~+125℃@(TJ) 2.5V 300kHz~667kHz 600mA 6V~75V Adjustable Buck Buck Built-in Yes MSOP-10 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS60204DGSR
MSOP-10-40℃~+85℃ 1.8V~3.6V 100mA 3.3V 300kHz 35uA 90% Support boost converter MSOP-10 Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersTPS60503DGS
VSSOP-10-0.5mm-40℃~+125℃ 1 1.5V 1.8V~6.5V 250mA 40uA 600kHz~1.2MHz Buck Built-in Fixed No VSSOP-10-0.5mm Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersMAX17552AUB+
MSOP-10-40℃~+125℃@(TA) 1 100kHz~2.2MHz 100mA 22uA 4V~60V 800mV~54V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Frequency synchronization、Hiccup current limiting Step-down type Yes MSOP-10 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS61007DGSR?
Yes. The symbol is EasyEDA_Cloud:TPS61007DGSR and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS61007DGSR?
MSOP-10, with 10 pins. Its footprint is drawn on this page.
Where is the TPS61007DGSR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS61007DGSR?
JLCPCB lists it as part C3745756, with 0 in stock; the sellers' links on this page open their listings.
What can replace the TPS61007DGSR?
Parts like it in the library: the LT1945EMS#TRPBF by Analog Devices, the LTC3440EMS#TRPBF by Analog Devices, the MCP1258-E/UN by Microchip Technology and the MIC2176-2YMM by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.