TPS60111PWP
Texas InstrumentsExtended
HTSSOP-20-EP Charge Pumps ROHS
- Part id
- ti/TPS60111PWP
- Category
- DC DC Converters
- Package
- HTSSOP-20-EP
- Pins
- 21
- In stock
- 30 at JLCPCB (C1355879)
Overview
The TPS60111PWP is a DC DC Converter made by Texas Instruments in a HTSSOP-20-EP package with 21 pins. HTSSOP-20-EP Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS60111PWPR, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL-EP-1, from EasyEDA), ready for a KiCad board. 30 are in stock at JLCPCB (part C1355879).
Symbol
The library has no symbol for this part yet.
Footprint
The library has no footprint for this part yet.
Parts like it
8TPS60111PWPG4
HTSSOP-20-EP-40℃~+85℃ 150mA 2.7V~5.4V 300kHz 5V 60uA 80% Low ripple / low noise architecture、Low-power standby、Digital control、Load disconnect Support boost converter HTSSOP-20-EP Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersLM5166DRC
VSON-10-EP(3x3)-40℃~+150℃@(TJ) 1 3V~65V 500mA 600kHz 9.7uA Adjustable Buck Buck Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM5166XDRC
VSON-10-EP(3x3)-40℃~+150℃@(TJ) 1 3V~65V 500mA 5V 600kHz 9.7uA Buck Buck Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMAX639CPA+
PDIP-8PDIP-8 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC ConvertersLT8640EUDC#TRPBF
QFN-18(3x4)-40℃~+125℃ 1 2.5uA 200kHz~3MHz 3.4V~42V 5A 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Frequency synchronization、Output voltage tracking、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes QFN-18(3x4) DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLM2574MX-5.0
SOIC-14-300mil-40℃~+125℃@(TJ) 1 10mA 4V~40V 500mA 52kHz 5V Buck Buck Built-in Fixed No SOIC-14-300mil DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersD2576HV-5.0(F)
TO-263-5L-40℃~+125℃ 1 3A 52kHz 5V 5mA 6V~60V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSSilicoreDC-DC ConvertersMAX77596ETBA+T
TDFN-10-EP(2x2.5)-40℃~+85℃@(TA) 1 1.7MHz 3.5V~24V 300mA 5V Buck Buck Built-in Fixed Yes TDFN-10-EP(2x2.5) DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS60111PWP?
Yes. The symbol is EasyEDA_Cloud:TPS60111PWPR and the footprint EasyEDA_Cloud:HTSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL-EP-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS60111PWP?
HTSSOP-20-EP, with 21 pins. Its footprint is drawn on this page.
Where is the TPS60111PWP datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS60111PWP?
JLCPCB lists it as part C1355879, with 30 in stock; the sellers' links on this page open their listings.
What can replace the TPS60111PWP?
Parts like it in the library: the TPS60111PWPG4 by Texas Instruments, the LM5166DRC by Texas Instruments, the LM5166XDRC by Texas Instruments and the MAX639CPA+ by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.