Skip to the content

TPS563252DRL

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.2MHz 100uA 3A 3V~17V 600mV~10V Adjustable Buck Buck Built-in Yes SOT-6(5x3) DC-DC Converters ROHS

Part id
ti/TPS563252DRL
Category
DC DC Converters
Package
SOT-6(5x3)
Pins
6
In stock
19,998 at JLCPCB (C19188399)
Used on
2 open-source boards

Overview

The TPS563252DRL is a DC DC Converter made by Texas Instruments in a SOT-6(5x3) package with 6 pins. -40℃~+125℃@(TJ) 1 1.2MHz 100uA 3A 3V~17V 600mV~10V Adjustable Buck Buck Built-in Yes SOT-6(5x3) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS563257DRLR, from EasyEDA) and its footprint (EasyEDA_Cloud:SOT-563-6_L1.6-W1.2-P0.50-LS1.6-BL, from EasyEDA), ready for a KiCad board. 19,998 are in stock at JLCPCB (part C19188399). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1VIN2SW3GND4PG5EN6FB
EasyEDA_Cloud:TPS563257DRLRFrom EasyEDA

Footprint

EasyEDA_Cloud:SOT-563-6_L1.6-W1.2-P0.50-LS1.6-BLFrom EasyEDA

From the datasheet

14
Supply, least
3 V · VIN, recommended operating min · p. 4
Supply, most
17 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
18 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · junction temperature, absolute max · p. 4
Takes working
100 µA · VIN quiescent current typical, ECO, no load, VEN = 5 V, VFB = 0.65 V, non-switching · p. 5
Takes asleep
2 µA · VIN shutdown current typical, no load, VEN = 0 V · p. 5
Gives
3 A · continuous output current max · p. 4
Current limit
4.1 A · overcurrent threshold typical, valley current set point · p. 6
Feedback reference
600 mV · FB voltage typical, TJ = 25°C · p. 5
Switches at
1.2 MHz · switching frequency typical, TJ = 25°C, VOUT = 3.3 V · p. 5
Junction to air (DRL (SOT-563))
137.4 K/W · junction-to-ambient thermal resistance, JEDEC board · p. 5
Junction to air (DRL (SOT-563))
74 K/W · effective junction-to-ambient thermal resistance on EVM board · p. 5
Junction to case (DRL (SOT-563))
58.8 K/W · junction-to-case top thermal resistance · p. 5
Junction to board (DRL (SOT-563))
29.8 K/W · junction-to-board thermal resistance · p. 5

What it is and has

11
Input voltage range
3V to 17V · p. 1
Output voltage range
0.6V to 10V · p. 1
Reference accuracy
±1% at 25°C · p. 1
Control mode
D-CAP3 · p. 1
Light-load operation
Eco-mode · p. 1
Bootstrap capacitor
Integrated · p. 1
Startup
Supports prebiased output · p. 1
Power-good indication
Open-drain · p. 1
Protection
Non-latching overvoltage, overtemperature and undervoltage lockout · p. 1
Undervoltage protection
Hiccup mode · p. 1
Package
1.6mm × 1.6mm SOT-563 · p. 1

Around it

27
cap over 10 µF
between VIN and GND; Recommended ceramic input decoupling capacitor; bulk capacitance depends on the application. · p. 17
cap 0.1-µF
between VIN and GND; Additional capacitor for high-frequency filtering; voltage rating must exceed maximum input voltage. · p. 17
res 10-kΩ
between FB and GND; R5 starting value for the output feedback divider; use 1% tolerance or better. · p. 16
cap 10-100pF
between VOUT and FB; Feedforward capacitor recommended for high output voltage to provide adequate phase margin. · p. 16
res 0 kΩ
between VOUT and FB; R4 for 0.6 V output. · p. 16
res 10.0 kΩ
between FB and GND; R5 for 0.6 V output. · p. 16
ind 0.68 μH
between SW and VOUT; Typical L1 for 0.6 V output. · p. 16
cap 44 μF
between VOUT and GND; Typical COUT for 0.6 V output; nominal range 44–88 uF; MLCC, 0805, 10 V. · p. 16
res 7.5 kΩ
between VOUT and FB; R4 for 1.05 V output. · p. 17
res 10.0 kΩ
between FB and GND; R5 for 1.05 V output. · p. 17
ind 0.82 μH
between SW and VOUT; Typical L1 for 1.05 V output. · p. 17
cap 22 μF
between VOUT and GND; Typical COUT for 1.05 V output; nominal range 22–44 uF; MLCC, 0805, 10 V. · p. 17
res 135.0 kΩ
between VOUT and FB; R4 for 3.3 V output. · p. 17
res 30.0 kΩ
between FB and GND; R5 for 3.3 V output. · p. 17
ind 2.2 μH
between SW and VOUT; Typical L1 for 3.3 V output. · p. 17
cap 22 μF
between VOUT and GND; Typical COUT for 3.3 V output; nominal range 22–88 uF; MLCC, 0805, 10 V. · p. 17
cap 33 pF
between VOUT and FB; Typical C6 feedforward capacitor for 3.3 V output. · p. 17
res 220.0 kΩ
between VOUT and FB; R4 for 5 V output. · p. 17
res 30.0 kΩ
between FB and GND; R5 for 5 V output. · p. 17
ind 2.2 μH
between SW and VOUT; Typical L1 for 5 V output. · p. 17
cap 22 μF
between VOUT and GND; Typical COUT for 5 V output; nominal range 22–88 uF; MLCC, 0805, 10 V. · p. 17
cap 22 pF
between VOUT and FB; Typical C6 feedforward capacitor for 5 V output. · p. 17
res 470.0 kΩ
between VOUT and FB; R4 for 10 V output. · p. 17
res 30.0 kΩ
between FB and GND; R5 for 10 V output. · p. 17
ind 4.7 μH
between SW and VOUT; Typical L1 for 10 V output. · p. 17
cap 44 μF
between VOUT and GND; Typical COUT for 10 V output; nominal range 44–88 uF; MLCC, 0805, 16 V. · p. 17
cap 47 pF
between VOUT and FB; Typical C6 feedforward capacitor for 10 V output. · p. 17

Specifications

59
ParameterConditionsAs printedPage
Pin voltageVIN; over operating free-air temperature range; relative to GNDmin -0.3 · max 18 V4
Pin voltageFB, EN, PG; over operating free-air temperature range; relative to GNDmin -0.3 · max 6 V4
Pin voltageGND; over operating free-air temperature rangemin -0.3 · max 0.3 V4
Pin voltageSW; over operating free-air temperature range; relative to GNDmin -2 · max 18 V4
Pin voltageSW (transient < 20 ns); relative to GNDmin -5.5 · max 20 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -55 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± ratingmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002; ± ratingmax 500 V4
Pin voltageVIN; over operating free-air temperature rangemin 3 · max 17 V4
Pin voltageFB, EN, PG; over operating free-air temperature rangemin -0.1 · max 5.5 V4
Pin voltageGND; over operating free-air temperature rangemin -0.1 · max 0.1 V4
Pin voltageSW; over operating free-air temperature rangemin -1 · max 17 V4
Pin voltageSW (transient < 20 ns)min -5 · max 18 V4
Output current IOUTOver operating free-air temperature rangemin 0 · max 3 A4
Temperature TJOperating junction temperaturemin -40 · max 125 °C4
Temperature TstgStorage temperaturemin -40 · max 150 °C4
Junction-to-ambient thermal resistance RθJADRL (SOT-563), 6 pins; standard JEDEC boardtyp 137.4 °C/W5
Junction-to-ambient thermal resistance on EVM board RθJA_effectiveDRL (SOT-563), 6 pins; TPS563252EVM, 2 layers, 2-oz copper, VIN = 12 V, VOUT = 5 V, IOUT = 3 A, TA = 25°Ctyp 74 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DRL (SOT-563), 6 pinstyp 58.8 °C/W5
Junction-to-board thermal resistance RθJBDRL (SOT-563), 6 pinstyp 29.8 °C/W5
Junction-to-top characterization parameter ψJTDRL (SOT-563), 6 pinstyp 1.3 °C/W5
Junction-to-board characterization parameter ψJBDRL (SOT-563), 6 pinstyp 29.4 °C/W5
Input voltage range VINVIN; TJ = –40°C to 125°Cmin 3 · max 17 V5
VIN supply current IVINTPS563252, ECO version; no load, VEN = 5 V, VFB = 0.65 V, non-switching; TJ = –40°C to 125°C, VIN = 12 Vtyp 100 uA5
VIN shutdown current IINSDNNo load, VEN = 0 V; TJ = –40°C to 125°C, VIN = 12 Vtyp 2 uA5
Input undervoltage lockout threshold VIN_UVLORising threshold; TJ = –40°C to 125°Cmin 2.8 · typ 2.92 · max 3 V5
Input undervoltage lockout threshold VIN_UVLOFalling threshold; TJ = –40°C to 125°Cmin 2.6 · typ 2.72 · max 2.8 V5
Input undervoltage lockout threshold VIN_UVLOHysteresis; TJ = –40°C to 125°Ctyp 200 mV5
FB voltage VREFTJ = 25°C, VIN = 12 Vmin 594 · typ 600 · max 606 mV5
FB voltage VREFTJ = –40°C to 125°C, VIN = 12 Vmin 591 · typ 600 · max 609 mV5
High-side MOSFET on-resistance RDSON_HSTJ = 25°C, VIN ≥ 5 Vtyp 55 mΩ5
High-side MOSFET on-resistance RDSON_HSTJ = 25°C, VIN = 3 V; specified by designtyp 67.5 mΩ5
Low-side MOSFET on-resistance RDSON_LSTJ = 25°C, VIN ≥ 5 Vtyp 24.3 mΩ5
Low-side MOSFET on-resistance RDSON_LSTJ = 25°C, VIN = 3 Vtyp 30.2 mΩ5
Switching frequency fswTJ = 25°C, VOUT = 3.3 V, VIN = 12 Vtyp 1.2 MHz5
Minimum on time tON(MIN)TJ = –40°C to 125°C, VIN = 12 V; specified by designtyp 60 ns5
Minimum off time tOFF(MIN)VFB = 0.5 V; TJ = –40°C to 125°C, VIN = 12 V; specified by designtyp 110 ns5
EN threshold high level VENHRising enable threshold; TJ = –40°C to 125°C, VIN = 12 Vmin 1.15 · typ 1.19 · max 1.25 V5
EN threshold low level VENLFalling disable threshold; TJ = –40°C to 125°C, VIN = 12 Vmin 0.9 · typ 1 · max 1.1 V5
EN hystersis VENHYSHysteresis; TJ = –40°C to 125°C, VIN = 12 Vtyp 190 mV5
EN pulldown resistor RENTJ = –40°C to 125°C, VIN = 12 Vtyp 2 MΩ5
Overcurrent threshold IOCL_LSValley current set point; TJ = –40°C to 125°C, VIN = 12 Vmin 3.1 · typ 4.1 · max 5 A6
Internal soft start time tSSTJ = –40°C to 125°C, VIN = 12 Vtyp 1.6 ms6
OVP trip threshold VOVPVFB rising; TJ = –40°C to 125°C, VIN = 12 Vmin 110 · typ 115 · max 120 %6
OVP prop deglitch tOVPDLYTJ = –40°C to 125°C, VIN = 12 Vtyp 24 us6
UVP trip threshold VUVPVFB falling; TJ = –40°C to 125°C, VIN = 12 Vmin 55 · typ 60 · max 65 %6
UVP prop deglitch tUVPDLYTJ = –40°C to 125°C, VIN = 12 Vtyp 220 us6
Hiccup enable delay time tUVPENUVP detect; TJ = –40°C to 125°C, VIN = 12 Vtyp 14 ms6
Power good threshold VPGTHFB falling, PG from high to low; TJ = –40°C to 125°C, VIN = 12 Vmin 80 · typ 85 · max 90 %6
Power good threshold VPGTHFB rising, PG from low to high; TJ = –40°C to 125°C, VIN = 12 Vmin 85 · typ 90 · max 95 %6
Power good threshold VPGTHFB falling, PG from low to high; TJ = –40°C to 125°C, VIN = 12 Vmin 105 · typ 110 · max 115 %6
Power good threshold VPGTHFB rising, PG from high to low; TJ = –40°C to 125°C, VIN = 12 Vmin 110 · typ 115 · max 120 %6
PG pin output low-level voltage VPG(OL)IOL = 4 mA; TJ = –40°C to 125°C, VIN = 12 Vmax 0.4 V6
PG pin leakage current when open drain output is high IPG(LKG)VPG = 5.5 V; TJ = –40°C to 125°C, VIN = 12 Vmax 1 uA6
PG delay going from low to high tPG(R)TJ = –40°C to 125°C, VIN = 12 Vtyp 1 ms6
PG delay going from high to low tPG(F)TJ = –40°C to 125°C, VIN = 12 Vtyp 28 us6
Thermal shutdown threshold TSDNShutdown temperature; specified by designtyp 155 °C6
Thermal shutdown threshold TOTPHSYHysteresis; specified by designtyp 20 °C6

Pins, by the datasheet

6
1 VIN
Input voltage supply; connect input decoupling capacitors between VIN and GND. · p. 3
2 SW
Switch node; connect the output inductor to this pin. · p. 3
3 GND
Ground for the controller circuit and internal circuitry. · p. 3
4 PG
Open-drain power-good indicator. · p. 3
5 EN
Enable control input; driving high enables the converter. · p. 3
6 FB
Converter feedback input; connect to output voltage with a feedback resistor divider. · p. 3

Open-source boards using it

2
  • 2 layers55.8 × 42.5 mmGPXconn v2 rev3, the printed circuit board in 3D

    GPXconn v2 rev3

    GPXenergy/gpx_connector

    GPXconnector device connecting to dutch smart meter and sending data to the GPX API

    65 parts1MIT
  • 2 layers17.8 × 20.3 mmSsd ps-33, the printed circuit board in 3D

    Ssd ps-33

    vasili-v/ssd-ps-33

    Schematics for Synchronous Step-Down DC-DC Power Supply

    19 partsMIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS563252DRL?

Yes. The symbol is EasyEDA_Cloud:TPS563257DRLR and the footprint EasyEDA_Cloud:SOT-563-6_L1.6-W1.2-P0.50-LS1.6-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS563252DRL?

SOT-6(5x3), with 6 pins. Its footprint is drawn on this page.

Where is the TPS563252DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS563252DRL?

JLCPCB lists it as part C19188399, with 19,998 in stock; the sellers' links on this page open their listings.

What can replace the TPS563252DRL?

Parts like it in the library: the ETA1654FSG by etasolution. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS563252DRL?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.