Skip to the content
12345

TPS560200DBV

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 4.5V~17V 500mA 600kHz 60uA 800mV~6.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHS

Part id
ti/TPS560200DBV
Category
DC DC Converters
Package
SOT-23-5
Pins
5
In stock
66,118 at JLCPCB (C83671)
Used on
9 open-source boards

Overview

The TPS560200DBV is a DC DC Converter made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(TJ) 1 4.5V~17V 500mA 600kHz 60uA 800mV~6.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS560200, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 66,118 are in stock at JLCPCB (part C83671). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1EN2GND3PH4VIN5FB
Regulator_Switching:TPS560200From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the TPS560200DBV
PinNameType
1ENInput
2GNDPower in
3PHPower out
4VINPower in
5FBInput

Open-source boards using it

9See all 9
  • 2 layers160 × 100 mmMarine gps, the printed circuit board in 3D

    Marine gps

    mbouyer/marine_chartplotter

    Hardware and software for an opencpn-based chartplotter

    115 parts6BSD-2-Clause
  • 2 layers86.5 × 42 mmFinal pcb, the printed circuit board in 3D

    Final pcb

    aguscsc/Bidirectional-Buck-DC-DC-converter

    This repository contains the development steps for the making of a Bidirectional Buck DC-DC converter

    42 parts5MIT
  • 2 layers100 × 72 mmPicow-1k, the printed circuit board in 3D

    Picow-1k

    Agilack/eCow-logic

    164 parts1
  • 4 layers70 × 40 mmTagger, the printed circuit board in 3D

    Tagger

    northernpaws/lasernet-rev1

    Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.

    80 parts
  • 2 layers25.9 × 17.3 mmSnapVCC, the printed circuit board in 3D

    SnapVCC

    electronut/ElectronutLabs-snapVCC

    A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.

    25 parts77
  • 2 layers25.9 × 17.3 mmSnapVCC, the printed circuit board in 3D

    SnapVCC

    electronut/ElectronutLabs-snapVCC

    A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.

    27 parts77
  • 2 layers25.9 × 17.3 mmSnapvcc, the printed circuit board in 3D

    Snapvcc

    elcruzo/learned-pcb-placement

    GNN-guided simulated annealing for PCB component placement. We train a Graph Attention Network on SA rollout data to learn which components to move and where, then use these predictions to bias the SA search.

    26 parts2MIT
  • 2 layers35.4 × 16 mmLped dock, the printed circuit board in 3D

    Lped dock

    b1u3-22/LPED

    Highly customizable low-power electronic playing dice

    25 parts1GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS560200DBV?

Yes. The symbol is Regulator_Switching:TPS560200 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS560200DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS560200DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS560200DBV?

JLCPCB lists it as part C83671, with 66,118 in stock; the sellers' links on this page open their listings.

What can replace the TPS560200DBV?

Parts like it in the library: the MT3540-F23 by XI'AN Aerosemi Tech, the TLV62569DBV by Texas Instruments, the SY8088IAAC by 矽力杰silergy and the MT3406 by XI'AN Aerosemi Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS560200DBV?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.