TPS54610MPWPREP
Texas InstrumentsExtended
-55℃~+125℃@(TJ) 1 3V~6V 6A 700kHz Buck Buck Built-in Yes HTSSOP-28-EP-4.5mm DC-DC Converters ROHS
- Part id
- ti/TPS54610MPWPREP
- Category
- DC DC Converters
- Package
- HTSSOP-28-EP-4.5mm
- Pins
- 29
- In stock
- 4 at JLCPCB (C2879313)
Overview
The TPS54610MPWPREP is a DC DC Converter made by Texas Instruments in a HTSSOP-28-EP-4.5mm package with 29 pins. -55℃~+125℃@(TJ) 1 3V~6V 6A 700kHz Buck Buck Built-in Yes HTSSOP-28-EP-4.5mm DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS54610MPWPREP, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, from EasyEDA), ready for a KiCad board. 4 are in stock at JLCPCB (part C2879313).
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | AGND | Unspecified |
| 2 | VSENSE | Unspecified |
| 3 | COMP | Unspecified |
| 4 | PWRGD | Unspecified |
| 5 | BOOT | Unspecified |
| 6 | PH | Unspecified |
| 7 | PH | Unspecified |
| 8 | PH | Unspecified |
| 9 | PH | Unspecified |
| 10 | PH | Unspecified |
| 11 | PH | Unspecified |
| 12 | PH | Unspecified |
| 13 | PH | Unspecified |
| 14 | PH | Unspecified |
| 15 | PGND | Unspecified |
| 16 | PGND | Unspecified |
| 17 | PGND | Unspecified |
| 18 | PGND | Unspecified |
| 19 | PGND | Unspecified |
| 20 | VIN | Unspecified |
| 21 | VIN | Unspecified |
| 22 | VIN | Unspecified |
| 23 | VIN | Unspecified |
| 24 | VIN | Unspecified |
| 25 | VBIAS | Unspecified |
| 26 | SS/ENA | Unspecified |
| 27 | FSEL | Unspecified |
| 28 | RT | Unspecified |
| 29 | PAD | Unspecified |
Parts like it
3
TPS54610PWPR
HTSSOP-28-40℃~+85℃@(TA) 1 11mA 350kHz、550kHz 3V~6V 6A 891mV~5.4V Adjustable Buck Buck Built-in Yes HTSSOP-28 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersEL7566DREZ-T7
HTSSOP-28-EP-4.5mm0℃~+85℃@(TA) 1 1MHz 2.7mA 3V~6V 6A 800mV~6V Adjustable Buck Built-in Overcurrent Protection、Adjustable soft-start、Operating status indication、Frequency synchronization、Dynamic voltage scaling Step-down type Yes HTSSOP-28-EP-4.5mm DC-DC Converters ROHSRenesas ElectronicsDC-DC ConvertersLM5175QPWPTQ1
HTSSOP-28-40℃~+150℃@(TJ) 1 1.65mA 3.5V~42V 600kHz 800mV~55V Adjustable Buck-Boost Buck-Boost External Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、EMI optimization (spread spectrum) Yes HTSSOP-28 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS54610MPWPREP?
Yes. The symbol is EasyEDA_Cloud:TPS54610MPWPREP and the footprint EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS54610MPWPREP?
HTSSOP-28-EP-4.5mm, with 29 pins. Its footprint is drawn on this page.
Where is the TPS54610MPWPREP datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS54610MPWPREP?
JLCPCB lists it as part C2879313, with 4 in stock; the sellers' links on this page open their listings.
What can replace the TPS54610MPWPREP?
Parts like it in the library: the TPS54610PWPR by Texas Instruments, the EL7566DREZ-T7 by Renesas Electronics and the LM5175QPWPTQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.