
ESP32 Flight Conroller
Maxandersen1/ESP32-S3-Flight_Controller
Custom ESP32 Flight Controller using BMI088 & BMP388 sensors. Hardware and firmware built from the ground up.
Texas InstrumentsExtended
-40℃~+150℃@(TJ) 1 110uA 3.5V~28V 3A 570kHz 800mV~25V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、External compensation Step-down type SOIC-8 DC-DC Converters ROHS
The TPS54331DG4 is a DC DC Converter made by Texas Instruments in a SOIC-8 package with 9 pins. -40℃~+150℃@(TJ) 1 110uA 3.5V~28V 3A 570kHz 800mV~25V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、External compensation Step-down type SOIC-8 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (freetronics_schematic:TPS54331, from Freetronics) and its footprint (freetronics_footprints:SO8_WITH_EP, from Freetronics), ready for a KiCad board. JLCPCB lists it (part C1356164). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | BOOT | Input/output |
| 2 | VIN | Power in |
| 3 | EN | Input |
| 4 | SS | Output |
| 5 | VSENSE | Input |
| 6 | COMP | Input |
| 7 | GND | Power in |
| 8 | PH | Power out |
| PAD | PAD | Power in |

Maxandersen1/ESP32-S3-Flight_Controller
Custom ESP32 Flight Controller using BMI088 & BMP388 sensors. Hardware and firmware built from the ground up.
Yes. The symbol is freetronics_schematic:TPS54331 and the footprint freetronics_footprints:SO8_WITH_EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-8, with 9 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C1356164, with 0 in stock; the sellers' links on this page open their listings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.