TPS54225PWPR
Texas InstrumentsExtended
-40℃~+85℃@(TA) 1 2A 2V~18V 700kHz 760mV~5.5V Adjustable Buck Buck Built-in Yes HTSSOP-14 DC-DC Converters ROHS
- Part id
- ti/TPS54225PWPR
- Category
- DC DC Converters
- Package
- HTSSOP-14
- Pins
- 15
- In stock
- 585 at JLCPCB (C555460)
Overview
The TPS54225PWPR is a DC DC Converter made by Texas Instruments in a HTSSOP-14 package with 15 pins. -40℃~+85℃@(TA) 1 2A 2V~18V 700kHz 760mV~5.5V Adjustable Buck Buck Built-in Yes HTSSOP-14 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS54326PWPR, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-14_L5.0-W4.4-P0.65-LS6.4-BL-EP-1, from EasyEDA), ready for a KiCad board. 585 are in stock at JLCPCB (part C555460).
Symbol
Footprint
From the datasheet
16- Supply, least
- 4.5 V · VCC, recommended operating min · p. 3
- Supply, most
- 18 V · VCC, recommended operating max · p. 3
- Supply, least
- 2 V · VIN, recommended operating min · p. 3
- Supply, absolute maximum
- 20 V · VIN and VCC, absolute max · p. 2
- Works from
- -40 °C · Operating free-air temperature min · p. 3
- Works up to
- 85 °C · Operating free-air temperature max · p. 3
- Junction, hottest
- 150 °C · Operating junction temperature absolute max · p. 2
- Takes working
- 800 µA · VCC non-switching operating current typical, EN = 5 V, TA = 25°C · p. 3
- Takes asleep
- 1.8 µA · VCC shutdown current typical, EN = 0 V, TA = 25°C · p. 3
- Gives
- 2 A · Rated continuous output current · p. 1
- Current limit
- 3.1 A · Current limit typical, LOUT = 2.2uH · p. 3
- Feedback reference
- 765 mV · VFB threshold typical, TA = 25°C, VO = 1.05 V · p. 3
- Switches at
- 700 kHz · Pseudo-constant switching frequency typical · p. 7
- Junction to air (PWP)
- 55.6 K/W · Junction-to-ambient thermal resistance · p. 2
- Junction to board (PWP)
- 26.4 K/W · Junction-to-board thermal resistance · p. 2
- Junction to case (PWP)
- 51.3 K/W · Junction-to-case top thermal resistance · p. 2
What it is and has
9- Control mode
- Adaptive on-time D-CAP2 synchronous buck · p. 1
- Output voltage range
- 0.76 V to 5.5 V · p. 1
- Integrated switch resistance
- 160 mΩ high side, 110 mΩ low side · p. 1
- Soft start
- Adjustable · p. 1
- Soft start
- Pre-biased startup support · p. 1
- Switching frequency
- 700 kHz · p. 1
- Protection
- Cycle-by-cycle overcurrent limit · p. 1
- Power good
- Power good output · p. 1
- Protection
- Thermal shutdown, typically 150°C · p. 8
Around it
6- cap 0.1 µF
- between VBST and SW; Ceramic bootstrap capacitor required for proper operation. · p. 14
- cap 1.0 µF
- between VREG5 and GND; Ceramic capacitor required for proper operation. · p. 14
- cap 0.1 µF
- between VCC and GND; Additional capacitor from pin 14 to ground recommended to improve over-current limit stability. · p. 13
- cap over 10 μF
- between VIN and GND; Ceramic input decoupling capacitor recommended; voltage rating must exceed maximum input voltage. · p. 13
- cap 2 × 22 µF
- between VOUT and GND; Design example uses two TDK C3216X5R0J226M output capacitors, typical ESR 2 mΩ each. · p. 13
- res 20 kΩ to 150 kΩ
- between PG and VREG5; Required power-good pull-up resistor. · p. 7
Specifications
66| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input voltage range VI | VIN, VCC, EN | min -0.3 · max 20 V | 2 |
| Input voltage range VI | VBST | min -0.3 · max 26 V | 2 |
| Input voltage range VI | VBST (vs SW1, SW2) | min -0.3 · max 6.5 V | 2 |
| Input voltage range VI | VFB, VO, SS, PG | min -0.3 · max 6.5 V | 2 |
| Input voltage range VI | SW1, SW2 | min -2 · max 20 V | 2 |
| Input voltage range VI | SW1, SW2 (10 ns transient) | min -3 · max 20 V | 2 |
| Output voltage range VO | VREG5 | min -0.3 · max 6.5 V | 2 |
| Output voltage range VO | PGND1, PGND2 | min -0.3 · max 0.3 V | 2 |
| Voltage from GND to POWERPAD Vdiff | min -0.2 · max 0.2 V | 2 | |
| Electrostatic discharge ESD rating | Human Body Model (HBM) | max 2 kV | 2 |
| Electrostatic discharge ESD rating | Charged Device Model (CDM) | max 500 V | 2 |
| Operating junction temperature TJ | min -40 · max 150 °C | 2 | |
| Storage temperature Tstg | min -55 · max 150 °C | 2 | |
| Junction-to-ambient thermal resistance θJA | PWP, 14 PINS | typ 55.6 °C/W | 2 |
| Junction-to-case (top) thermal resistance θJCtop | PWP, 14 PINS | typ 51.3 °C/W | 2 |
| Junction-to-board thermal resistance θJB | PWP, 14 PINS | typ 26.4 °C/W | 2 |
| Junction-to-top characterization parameter ψJT | PWP, 14 PINS | typ 1.8 °C/W | 2 |
| Junction-to-board characterization parameter ψJB | PWP, 14 PINS | typ 20.6 °C/W | 2 |
| Junction-to-case (bottom) thermal resistance θJCbot | PWP, 14 PINS | typ 4.3 °C/W | 2 |
| Supply input voltage range VCC | min 4.5 · max 18 V | 3 | |
| Power input voltage range VIN | min 2 · max 18 V | 3 | |
| Input voltage range VI | VBST | min -0.1 · max 24 V | 3 |
| Input voltage range VI | VBST (vs SW1, SW2) | min -0.1 · max 5.7 V | 3 |
| Input voltage range VI | SS, PG | min -0.1 · max 5.7 V | 3 |
| Input voltage range VI | EN | min -0.1 · max 18 V | 3 |
| Input voltage range VI | VO, VFB | min -0.1 · max 5.5 V | 3 |
| Input voltage range VI | SW1, SW2 | min -1.8 · max 18 V | 3 |
| Input voltage range VI | SW1, SW2 (10 ns transient) | min -3 · max 18 V | 3 |
| Input voltage range VI | PGND1, PGND2 | min -0.1 · max 0.1 V | 3 |
| Output voltage range VO | VREG5 | min -0.1 · max 5.7 V | 3 |
| Output current range IO | IVREG5 | min 0 · max 10 mA | 3 |
| Operating free-air temperature TA | min -40 · max 85 °C | 3 | |
| Operating junction temperature TJ | min -40 · max 125 °C | 3 | |
| Operating - non-switching supply current IVCC | VCC, VIN = 12V; VCC current, TA = 25°C, EN = 5 V, VFB = 0.8 V | typ 800 · max 1200 uA | 3 |
| Shutdown supply current IVCCSDN | VCC, VIN = 12V; VCC current, TA = 25°C, EN = 0 V | typ 1.8 · max 10 uA | 3 |
| EN high-level input voltage VENH | VCC, VIN = 12V; EN | min 2 V | 3 |
| EN low-level input voltage VENL | VCC, VIN = 12V; EN | max 0.4 V | 3 |
| Threshold voltage VFB | VCC, VIN = 12V; TA = 25°C, VO = 1.05 V | min 757 · typ 765 · max 773 mV | 3 |
| Threshold voltage VFB | VCC, VIN = 12V; TA = 0°C to 85°C, VO = 1.05 V; specified by design | min 753 · max 777 mV | 3 |
| Threshold voltage VFB | VCC, VIN = 12V; TA = -40°C to 85°C, VO = 1.05 V; specified by design | min 751 · max 779 mV | 3 |
| Input current IVFB | VCC, VIN = 12V; VFB = 0.8 V, TA = 25°C | typ 0 · max 0.1 uA | 3 |
| VO discharge resistance RDischg | VCC, VIN = 12V; EN = 0 V, VO = 0.5 V, TA = 25°C | typ 50 · max 100 Ω | 3 |
| Output voltage VVREG5 | TA = 25°C, 6 V < VCC < 18 V, 0 < IVREG5 < 5 mA | min 5.3 · typ 5.5 · max 5.7 V | 3 |
| Line regulation VLN5 | 6 V < VCC < 18 V, IVREG5 = 5 mA | max 20 mV | 3 |
| Load regulation VLD5 | 0 mA < IVREG5 < 5 mA | max 100 mV | 3 |
| Output current IVREG5 | VCC = 6 V, VREG5 = 4 V, TA = 25°C | typ 70 mA | 3 |
| High side switch resistance RDS(on)h | VCC, VIN = 12V; 25°C, VBST - SW1, SW2 = 5.5 V | typ 160 mΩ | 3 |
| Low side switch resistance RDS(on)l | VCC, VIN = 12V; 25°C | typ 110 mΩ | 3 |
| Current limit Iocl | VCC, VIN = 12V; LOUT = 2.2uH; specified by design | min 2.5 · typ 3.1 · max 4.5 A | 3 |
| Thermal shutdown threshold TSDN | Shutdown temperature; specified by design | typ 150 °C | 3 |
| Thermal shutdown threshold TSDN | Hysteresis; specified by design | typ 25 °C | 3 |
| On time tON | VCC = 12V; VIN = 12 V, VO = 1.05 V | typ 145 ns | 4 |
| Minimum off time tOFF(MIN) | VCC, VIN = 12V; TA = 25°C, VFB = 0.7 V | typ 260 · max 310 ns | 4 |
| Charge current ISSC | VCC, VIN = 12V; VSS = 0 V | min 1.4 · typ 2 · max 2.6 uA | 4 |
| Discharge current ISSD | VCC, VIN = 12V; VSS = 0.5 V | min 0.1 · typ 0.2 mA | 4 |
| Threshold VTHPG | VCC, VIN = 12V; VFB rising (good) | min 85 · typ 90 · max 95 % | 4 |
| Threshold VTHPG | VCC, VIN = 12V; VFB falling (fault) | typ 85 % | 4 |
| Sink current IPG | VCC, VIN = 12V; PG = 0.5 V | min 2.5 · typ 5 mA | 4 |
| Output OVP trip threshold VOVP | VCC, VIN = 12V; OVP detect | min 115 · typ 120 · max 125 % | 4 |
| Output OVP prop delay tOVPDEL | VCC, VIN = 12V | typ 5 us | 4 |
| Output UVP trip threshold VUVP | VCC, VIN = 12V; UVP detect | min 65 · typ 70 · max 75 % | 4 |
| Output UVP trip threshold VUVP | VCC, VIN = 12V; Hysteresis | typ 10 % | 4 |
| Output UVP delay tUVPDEL | VCC, VIN = 12V | typ 0.25 ms | 4 |
| Output UVP enable delay tUVPEN | VCC, VIN = 12V; Relative to soft-start time, multiplier | typ 1.7 | 4 |
| UVLO threshold UVLO | VCC, VIN = 12V; Wake up VREG5 voltage | min 3.55 · typ 3.8 · max 4.05 V | 4 |
| UVLO threshold UVLO | VCC, VIN = 12V; Hysteresis VREG5 voltage | min 0.23 · typ 0.35 · max 0.47 V | 4 |
Ordering codes, by the datasheet
6- TPS54225PWP
- HTSSOP (PWP), 14 pins · 90 per tube; -40 to 85°C · p. 17
- TPS54225PWP.A
- HTSSOP (PWP), 14 pins · 90 per tube; -40 to 85°C · p. 17
- TPS54225PWP.B
- HTSSOP (PWP), 14 pins · 90 per tube; -40 to 85°C · p. 17
- TPS54225PWPR
- HTSSOP (PWP), 14 pins · 2000 per large tape and reel; -40 to 85°C · p. 17
- TPS54225PWPR.A
- HTSSOP (PWP), 14 pins · 2000 per large tape and reel; -40 to 85°C · p. 17
- TPS54225PWPR.B
- HTSSOP (PWP), 14 pins · 2000 per large tape and reel; -40 to 85°C · p. 17
Parts like it
2TPS54325PWP
HTSSOP-14-EP-40℃~+85℃@(TA) 1 2V~18V 3A 700kHz 760mV~5.5V Adjustable Buck Buck Built-in Yes HTSSOP-14-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM5185PWP
HTSSOP-14-40℃~+150℃@(TJ) 1 11kHz~350kHz 25uA 4.5V~100V Adjustable External Flyback No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Adjustable current limiting、External compensation、Built-in LDO regulator HTSSOP-14 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS54225PWPR?
Yes. The symbol is EasyEDA_Cloud:TPS54326PWPR and the footprint EasyEDA_Cloud:HTSSOP-14_L5.0-W4.4-P0.65-LS6.4-BL-EP-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS54225PWPR?
HTSSOP-14, with 15 pins. Its footprint is drawn on this page.
Where is the TPS54225PWPR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS54225PWPR?
JLCPCB lists it as part C555460, with 585 in stock; the sellers' links on this page open their listings.
What can replace the TPS54225PWPR?
Parts like it in the library: the TPS54325PWP by Texas Instruments and the LM5185PWP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.