Skip to the content

TPS53319DQPR

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 1.5V~22V 14A 1MHz 590uA 600mV~5.5V Adjustable Buck Buck Built-in Yes LSON-CLIP-22-EP(5x6) DC-DC Converters ROHS

Part id
ti/TPS53319DQPR
Category
DC DC Converters
Package
LSON-CLIP-22-EP(5x6)
Pins
23
In stock
148 at JLCPCB (C181971)
Used on
2 open-source boards

Overview

The TPS53319DQPR is a DC DC Converter made by Texas Instruments in a LSON-CLIP-22-EP(5x6) package with 23 pins. -40℃~+85℃@(TA) 1 1.5V~22V 14A 1MHz 590uA 600mV~5.5V Adjustable Buck Buck Built-in Yes LSON-CLIP-22-EP(5x6) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:TI TPS53319DQP, from Altium's library) and its footprint (EasyEDA_Cloud:LSON-CLIP-22_L6.0-W5.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 148 are in stock at JLCPCB (part C181971). 2 open-source boards in 1 repository on GitHub use it.

Symbol

4VBST1VFB12VIN13VIN14VIN15VIN16VIN17VIN2EN3PGOOD6LL7LL8LL9LL10LL11LL20MODE23PAD22RF5ROVP21TRIP19VDD18VREG
Celestial_Power_Switchmode:TI TPS53319DQPFrom Altium's library

Footprint

EasyEDA_Cloud:LSON-CLIP-22_L6.0-W5.0-P0.50-BL-EPFrom EasyEDA

From the datasheet

25
Supply, least
1.5 V · VIN, recommended operating min · p. 6
Supply, most
22 V · VIN, recommended operating max · p. 6
Supply, least
4.5 V · VDD, recommended operating min · p. 6
Supply, most
25 V · VDD, recommended operating max · p. 6
Supply, absolute maximum
30 V · VIN, absolute max · p. 6
Supply, absolute maximum
28 V · VDD, absolute max · p. 6
Works from
-40 °C · Operating free-air temperature min · p. 6
Works up to
85 °C · Operating free-air temperature max · p. 6
Junction, hottest
150 °C · Junction temperature absolute max · p. 6
Takes working
420 µA · VDD supply current typical, enabled, no load, TA = 25°C · p. 7
Takes asleep
122 µA · VDD shutdown current max, VEN = 0 V, TA = 25°C · p. 7
Gives
14 A · TPS53319 continuous output current rating · p. 1
Current limit
5.4 A · Valley current limit typical, RTRIP = 66.5 kΩ, –40°C ≤ TA ≤ 125°C · p. 8
Feedback reference
600 mV · VFB regulation voltage typical, CCM · p. 7
Switches at
250 kHz · Switching frequency typical, RRF = 0 Ω to GND, TA = 25°C · p. 8
Switches at
300 kHz · Switching frequency typical, RRF = 187 kΩ to GND, TA = 25°C · p. 8
Switches at
400 kHz · Switching frequency typical, RRF = 619 kΩ to GND, TA = 25°C · p. 8
Switches at
500 kHz · Switching frequency typical, RRF open, TA = 25°C · p. 8
Switches at
600 kHz · Switching frequency typical, RRF = 866 kΩ to VREG, TA = 25°C · p. 8
Switches at
750 kHz · Switching frequency typical, RRF = 309 kΩ to VREG, TA = 25°C · p. 8
Switches at
850 kHz · Switching frequency typical, RRF = 124 kΩ to VREG, TA = 25°C · p. 8
Switches at
970 kHz · Switching frequency typical, RRF = 0 Ω to VREG, TA = 25°C · p. 8
Junction to air (DQP)
27.2 K/W · Junction-to-ambient thermal resistance · p. 7
Junction to case (DQP)
17.1 K/W · Junction-to-case top thermal resistance · p. 7
Junction to board (DQP)
5.9 K/W · Junction-to-board thermal resistance · p. 7

What it is and has

11
Conversion input voltage range
1.5V to 22V · p. 1
VDD input voltage range
4.5V to 25V · p. 1
Output voltage range
0.6V to 5.5V · p. 1
LDO output
5V · p. 1
Continuous output current
14A · p. 1
Light-load control
Auto-skip Eco-mode · p. 1
Operating modes
Selectable auto-skip or PWM-only · p. 1
Reference
1%, 0.6V · p. 1
Boost switch
Integrated · p. 1
Output capacitors
Supports all ceramic output capacitors · p. 1
Power-good indication
Open-drain · p. 1

Around it

7
res 0 Ω
between RF and GND; Selects typical 250 kHz switching frequency. · p. 8
res 187 kΩ
between RF and GND; Selects typical 300 kHz switching frequency. · p. 8
res 619 kΩ
between RF and GND; Selects typical 400 kHz switching frequency. · p. 8
res 866 kΩ
between RF and VREG; Selects typical 600 kHz switching frequency. · p. 8
res 309 kΩ
between RF and VREG; Selects typical 750 kHz switching frequency. · p. 8
res 124 kΩ
between RF and VREG; Selects typical 850 kHz switching frequency. · p. 8
res 0 Ω
between RF and VREG; Selects typical 970 kHz switching frequency. · p. 8

Specifications

89
ParameterConditionsAs printedPage
Input voltage rangeVIN (main supply)min -0.3 · max 30 V6
Input voltage rangeVDDmin -0.3 · max 28 V6
Input voltage rangeVBSTmin -0.3 · max 32 V6
Input voltage rangeVBST (with respect to LL)min -0.3 · max 7 V6
Input voltage rangeEN, MODE, TRIP, RF, ROVP, VFBmin -0.3 · max 7 V6
Output voltage rangeLL, DCmin -2 · max 30 V6
Output voltage rangeLL, Pulse < 20ns, E = 5 uJmin -7 · max 32 V6
Output voltage rangePGOOD, VREGmin -0.3 · max 7 V6
Output voltage rangeGNDmin -0.3 · max 0.3 V6
Source/Sink currentVBSTmin 50 mA6
Operating free-air temperature, TA TAmin -40 · max 85 °C6
Junction temperature range, TJ TJmin -40 · max 150 °C6
Lead temperature 1,6 mm (1/16 inch) from case for 10 secondsmax 300 °C6
Storage temperature, Tstg Tstgmin -55 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)min -2000 · max 2000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101(2)min -500 · max 500 V6
Input voltage rangeVIN (main supply)min 1.5 · max 22 V6
Input voltage rangeVDDmin 4.5 · max 25 V6
Input voltage rangeVBSTmin 4.5 · max 28 V6
Input voltage rangeVBST (with respect to LL)min 4.5 · max 6.5 V6
Input voltage rangeEN, MODE, TRIP, RF, ROVP, VFBmin -0.1 · max 6.5 V6
Output voltage rangeLLmin -1 · max 27 V6
Output voltage rangePGOOD, VREGmin -0.1 · max 6.5 V6
Junction temperature range, TJ TJmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJATPS53319, DQP, 22 PINStyp 27.2 °C/W7
Junction-to-case (top) thermal resistance RθJC(top)TPS53319, DQP, 22 PINStyp 17.1 °C/W7
Junction-to-board thermal resistance RθJBTPS53319, DQP, 22 PINStyp 5.9 °C/W7
Junction-to-top characterization parameter ψJTTPS53319, DQP, 22 PINStyp 0.8 °C/W7
Junction-to-board characterization parameter ψJBTPS53319, DQP, 22 PINStyp 5.8 °C/W7
Junction-to-case (bottom) thermal resistance RθJC(bot)TPS53319, DQP, 22 PINStyp 1.2 °C/W7
VIN pin power conversion input voltage VVINOver recommended free-air temperature range, VVDD = 12 Vmin 1.5 · max 22 V7
Supply input voltage VVDDOver recommended free-air temperature rangemin 4.5 · max 25 V7
VIN pin leakage current IVIN(leak)VEN = 0 Vmax 1 uA7
VDD supply current IVDDTA = 25°C, No load, VEN = 5 V, VVFB = 0.630 Vtyp 420 · max 590 uA7
VDD shutdown current IVDDSDNTA = 25°C, No load, VEN = 0 Vmax 122 uA7
VFB regulation voltage VVFBCCM condition(1)typ 0.6 V7
VFB regulation voltage VVFBTA = 25°Cmin 0.597 · typ 0.6 · max 0.603 V7
VFB regulation voltage VVFB0°C ≤ TA ≤ 85°Cmin 0.5952 · typ 0.6 · max 0.6048 V7
VFB regulation voltage VVFB–40°C ≤ TA ≤ 85°Cmin 0.594 · typ 0.6 · max 0.606 V7
VFB input current IVFBVVFB = 0.630 V, TA = 25°Ctyp 0.01 · max 0.2 uA7
LDO output voltage VVREG0 mA ≤ IVREG ≤ 30 mAmin 4.77 · typ 5 · max 5.36 V7
LDO output current(1) IVREGMaximum current allowed from LDOmax 30 mA7
Low drop out voltage VDOVVDD = 4.5 V, IVREG = 30 mAmax 250 mV7
Forward voltage VFBSTVVREG-VBST, IF = 10 mA, TA = 25°Ctyp 0.1 · max 0.2 V7
VBST leakage current IVBSTLKVVBST = 23 V, VSW = 17 V, TA = 25°Ctyp 0.01 · max 1.5 uA7
Minimum off-time tOFF(min)TA = 25°Cmin 150 · typ 260 · max 400 ns7
Minimum on-time tON(min)VIN = 17 V, VOUT = 0.6 V, fSW = 1 MHz, TA = 25 °C(1)typ 35 ns7
Internal soft-start time from VOUT = 0 V to 95% of VOUT tSSRMODE = 39 kΩtyp 0.7 ms7
Internal soft-start time from VOUT = 0 V to 95% of VOUT tSSRMODE = 100 kΩtyp 1.4 ms7
Internal soft-start time from VOUT = 0 V to 95% of VOUT tSSRMODE = 200 kΩtyp 2.8 ms7
Internal soft-start time from VOUT = 0 V to 95% of VOUT tSSRMODE = 470 kΩtyp 5.6 ms7
Output voltage discharge current IDSCHGVEN = 0 V, VSW = 0.5 Vmin 5 · typ 6.6 · max 9 mA8
PG threshold VTHPGPG in from lowermin 92.5 · typ 95 · max 98.5 %8
PG threshold VTHPGPG in from highermin 107.5 · typ 110 · max 112.5 %8
PG threshold VTHPGPG hysteresismin 2.5 · typ 5 · max 7.5 %8
PG transistor on-resistance RPGmin 15 · typ 30 · max 60 Ω8
PG delay tPGDELDelay for PG inmin 0.8 · typ 1 · max 1.2 ms8
EN Voltage VENEnablemin 1 · typ 1.3 · max 1.6 V8
EN Voltage VENDisablemin 0.8 · typ 1 · max 1.2 V8
EN Input current IENVEN = 5 Vmax 1 uA8
Switching frequency fSWRRF = 0 Ω to GND, TA = 25°C(2)min 200 · typ 250 · max 300 kHz8
Switching frequency fSWRRF = 187 kΩ to GND, TA = 25°C(2)min 250 · typ 300 · max 350 kHz8
Switching frequency fSWRRF = 619 kΩ, to GND, TA = 25°C(2)min 350 · typ 400 · max 450 kHz8
Switching frequency fSWRRF = Open, TA = 25°C(2)min 450 · typ 500 · max 550 kHz8
Switching frequency fSWRRF = 866 kΩ to VREG, TA = 25°C(2)min 540 · typ 600 · max 660 kHz8
Switching frequency fSWRRF = 309 kΩ to VREG, TA = 25°C(2)min 670 · typ 750 · max 820 kHz8
Switching frequency fSWRRF = 124 kΩ to VREG, TA = 25°C(2)min 770 · typ 850 · max 930 kHz8
Switching frequency fSWRRF = 0 Ω to VREG, TA = 25°C(2)min 880 · typ 970 · max 1070 kHz8
TRIP source current ITRIPVTRIP = 1 V, TA = 25°Ctyp 10 uA8
TRIP current temperature coefficient TCITRIPOn the basis of 25°C(2)typ 3000 ppm/°C8
Current limit threshold setting range VTRIPTPS53319, VTRIP-GNDmax 2.4 V8
Current limit threshold VOCLVTRIP = 1.2 Vmin 37.5 mV8
Current limit threshold VOCLVTRIP = 0.4typ 12.5 mV8
Negative current limit threshold VOCLNVTRIP = 1.2 Vtyp -37.5 mV8
Negative current limit threshold VOCLNVTRIP = 0.4 Vtyp -12.5 mV8
Valley current limit threshold IOCPRTRIP = 66.5 kΩ, 0°C ≤ TA ≤ 125°Cmin 4.6 · typ 5.4 · max 6.3 A8
Valley current limit threshold IOCPRTRIP = 66.5 kΩ, –40°C ≤ TA ≤ 125°Cmin 4.4 · typ 5.4 · max 6.3 A8
Auto zero cross adjustable range VAZCADJPositivemin 3 · typ 15 mV8
Auto zero cross adjustable range VAZCADJNegativetyp -15 · max -3 mV8
OVP trip threshold VOVPOVP detectmin 115 · typ 120 · max 125 %8
OVP propagation delay tOVPDELVFB delay with 50-mV overdrivetyp 1 us8
Output UVP trip threshold VUVPUVP detectmin 65 · typ 70 · max 75 %8
Output UVP propagation delay tUVPDELmin 0.8 · typ 1 · max 1.2 ms8
Output UVP enable delay tUVPENFrom enable to UVP workablemin 1.5 · typ 2.3 · max 3 ms8
VREG UVLO threshold VUVVREGWake upmin 4 · typ 4.2 · max 4.33 V8
VREG UVLO threshold VUVVREGHysteresistyp 0.25 V8
Output UVP proprogation delay tUVPDELmin 0.8 · typ 1 · max 1.2 ms9
Thermal shutdown threshold TSDNShutdown temperature(2)typ 145 °C9
Thermal shutdown threshold TSDNHysteresis(2)typ 10 °C9

Pins, by the datasheet

23
1 VFB
Output feedback input; connect to VOUT through a resistor divider. · p. 4
2 EN
Enable input; typical turnon threshold is 1.3 V and turnoff threshold is 1.0 V. · p. 4
3 PGOOD
Power-good flag with 1-ms start-up delay and 2-us delay when VFB leaves the specified limits. · p. 4
4 VBST
High-side FET gate-driver supply; connect a capacitor to LL; internally connected to VREG through a bootstrap MOSFET switch. · p. 4
5 ROVP
Redundant overvoltage protection input; connect to VOUT through a resistor divider, or to GND when unused; do not leave floating. · p. 4
6 LL
Converted power output; connect to the output inductor. · p. 4
7 LL
Converted power output; connect to the output inductor. · p. 4
8 LL
Converted power output; connect to the output inductor. · p. 4
9 LL
Converted power output; connect to the output inductor. · p. 4
10 LL
Converted power output; connect to the output inductor. · p. 4
11 LL
Converted power output; connect to the output inductor. · p. 4
12 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
13 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
14 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
15 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
16 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
17 VIN
Conversion power input, 1.5 V to 22 V. · p. 4
18 VREG
5-V LDO output supplying internal analog and driver circuitry. · p. 4
19 VDD
Controller power supply input, 4.5 V to 25 V. · p. 4
20 MODE
Soft-start and mode selection; connect a resistor to select soft-start time, stored during start-up. · p. 4
21 TRIP
Overcurrent-limit threshold setting input; sourced current sets the trip voltage. · p. 4
22 RF
Switching-frequency selection; connect a resistor to GND or VREG; setting is stored during start-up. · p. 4
PowerPad GND
Ground and thermal pad; use a proper number of vias to connect to the ground plane. · p. 4

Open-source boards using it

2
  • 4 layers58.5 × 120.9 mmMainPCB, the printed circuit board in 3D

    MainPCB

    LEDs-by-glowingkitty/GlowTower

    A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.

    155 parts9GPL-3.0
  • 4 layers58.5 × 120.9 mmMainPCB, the printed circuit board in 3D

    MainPCB

    LEDs-by-glowingkitty/GlowTower

    A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.

    119 parts9GPL-3.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the TPS53319DQPR?

Yes. The symbol is Celestial_Power_Switchmode:TI TPS53319DQP and the footprint EasyEDA_Cloud:LSON-CLIP-22_L6.0-W5.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS53319DQPR?

LSON-CLIP-22-EP(5x6), with 23 pins. Its footprint is drawn on this page.

Where is the TPS53319DQPR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS53319DQPR?

JLCPCB lists it as part C181971, with 148 in stock; the sellers' links on this page open their listings.

What can replace the TPS53319DQPR?

Parts like it in the library: the TPS53353DQPR by Texas Instruments, the TPS53355DQPR by Texas Instruments, the TPS56121DQPR by Texas Instruments and the TPS53353DQPT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS53319DQPR?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.