TPS3431SDRB
Texas InstrumentsExtended
-40℃~+125℃ 1 1.8V~6.5V 10uA 230ms Active Low Open-drain Watchdog timer VDFN-8-EP(3x3) Supervisor and Reset ICs ROHS
- Part id
- ti/TPS3431SDRB
- Category
- Supervisor And Reset ICs
- Package
- VDFN-8-EP(3x3)
- Pins
- 9
- In stock
- 22 at JLCPCB (C702145)
Overview
The TPS3431SDRB is a supervisor And Reset IC made by Texas Instruments in a VDFN-8-EP(3x3) package with 9 pins. -40℃~+125℃ 1 1.8V~6.5V 10uA 230ms Active Low Open-drain Watchdog timer VDFN-8-EP(3x3) Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS3431SDRBR, from EasyEDA) and its footprint (EasyEDA_Cloud:VSON-8_L3.0-W3.0-P0.65-TL-EP, from EasyEDA), ready for a KiCad board. 22 are in stock at JLCPCB (part C702145).
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.8 V · VDD, recommended operating minimum · p. 4
- Supply, most
- 6.5 V · VDD, recommended operating maximum · p. 4
- Supply, absolute maximum
- 7 V · VDD, absolute maximum · p. 4
- Junction, hottest
- 150 °C · Operating junction temperature, absolute maximum · p. 4
- Takes working
- 10 µA · VDD supply current, typical · p. 5
- A pin gives at most
- 20 mA · ENOUT or WDO output current magnitude, absolute maximum · p. 4
- Junction to air (DRB (VSON))
- 50.7 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DRB (VSON))
- 51.6 K/W · Junction-to-case top thermal resistance · p. 5
- Junction to board (DRB (VSON))
- 25.8 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
5- Watchdog disable
- Supported · p. 1
- Watchdog timeout
- User programmable · p. 1
- Watchdog output
- Active-low, open-drain · p. 1
- Enable
- EN input and ENOUT output · p. 1
- Package
- 3 mm × 3 mm, 8-pin VSON · p. 1
Around it
5- cap 0.1 μF
- between VDD and GND; Bypass capacitor recommended for noisy systems. · p. 3
- res 10 kΩ
- between CWD and VDD; Optional configuration for factory-programmed watchdog timing. · p. 13
- res 1 kΩ to 100 kΩ
- between WDO and VPU; External pullup to the correct pull-up voltage rail. · p. 3
- res 1 kΩ to 100 kΩ
- between ENOUT and VPU; External pullup to the correct pull-up voltage rail. · p. 3
- cap 2.7 nF
- between CWD and GND; Design 2 example watchdog timing capacitor. · p. 17
Specifications
33| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage range | VDD | min -0.3 · max 7 V | 4 |
| Output voltage range | ENOUT, WDO | min -0.3 · max 7 V | 4 |
| Voltage ranges | SET1, WDI, EN | min -0.3 · max 7 V | 4 |
| Voltage ranges | CWD; maximum is the smaller of VDD + 0.3 V and 7.0 V | min -0.3 V | 4 |
| Temperature TJ | Operating junction | max 150 °C | 4 |
| Temperature TA | Operating free-air temperature | min -40 · max 150 °C | 4 |
| Temperature Tstg | Storage | min -65 · max 150 °C | 4 |
| Supply pin voltage VDD | min 1.8 · max 6.5 V | 4 | |
| SET1 pin voltage VSET1 | min 0 · max 6.5 V | 4 | |
| Watchdog timing capacitor CCWD | min 0.1 · max 1000 nF | 4 | |
| Pullup resistor to VDD CWD | min 9 · typ 10 · max 11 kΩ | 4 | |
| Pullup resistor, ENOUT and WDO RPU | min 1 · typ 10 · max 100 kΩ | 4 | |
| EN pin current IEN | max 10 mA | 4 | |
| Watchdog output current IWDO | max 10 mA | 4 | |
| Junction Temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DRB (VSON), 8 PINS | typ 50.7 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DRB (VSON), 8 PINS | typ 51.6 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DRB (VSON), 8 PINS | typ 25.8 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DRB (VSON), 8 PINS | typ 1.3 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DRB (VSON), 8 PINS | typ 25.8 °C/W | 5 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | DRB (VSON), 8 PINS | typ 7.1 °C/W | 5 |
| Supply voltage VDD | min 1.8 · max 6.5 V | 5 | |
| Supply current IDD | typ 10 · max 19 uA | 5 | |
| Power-on reset voltage VPOR | VOL(MAX) = 0.25 V | max 0.8 V | 5 |
| EN pin internal pullup current IEN | VEN = 0V | min 500 · typ 620 · max 700 nA | 5 |
| CWD pin charge current ICWD | CWD = 0.5 V | min 347 · typ 375 · max 403 nA | 5 |
| CWD pin threshold voltage VCWD | min 1.196 · typ 1.21 · max 1.224 V | 5 | |
| ENOUT, WDO output low VOL | VDD = 5 V, ISINK = 3 mA | max 0.4 V | 5 |
| ENOUT, WDO output leakage current ID | VDD = 1.8 V, VWDO = 6.5 V | max 1 uA | 5 |
| Low-level input voltage (EN, SET1) VIL | max 0.25 V | 5 | |
| High-level input voltage (EN, SET1) VIH | min 0.8 V | 5 | |
| STANDARD WATCHDOG TIMEOUT WDT (tWD) tWD | CWD = NC, SET1 = 1 | min 1360 · typ 1600 · max 1840 ms | 13 |
| STANDARD WATCHDOG TIMEOUT WDT (tWD) tWD | CWD = 10 kΩ to VDD, SET1 = 1 | min 170 · typ 200 · max 230 ms | 13 |
Pins, by the datasheet
9- 1 VDD
- Supply voltage; a 0.1-uF bypass capacitor is recommended for noisy systems. · p. 3
- 2 CWD
- Watchdog timeout programming input; connect a capacitor to ground, a 10-kΩ resistor to VDD, or leave unconnected to select timing. · p. 3
- 3 EN
- Internally pulled up to VDD; low disables the watchdog and drives ENOUT low, while high enables ENOUT after tRST. · p. 3
- 4 GND
- Ground pin. · p. 3
- 5 SET1
- Logic input selecting watchdog timing with CWD; grounding disables the watchdog timer. · p. 3
- 6 WDI
- Watchdog input requiring a falling edge before tWD expires; drive to VDD or GND when the watchdog is disabled. · p. 3
- 7 WDO
- Active-low watchdog fault output; connect a 1-kΩ to 100-kΩ pullup to VPU; asserts for tRST after a timeout. · p. 3
- 8 ENOUT
- Active-high enable output; connect a 1-kΩ to 100-kΩ pullup to VPU; asserts after tRST when EN goes high and goes low when EN is low. · p. 3
- Thermal pad Thermal pad
- Internally connected to GND; connect to a large-area ground plane. · p. 3
Parts like it
3TLC7701IDRBT-NM
VSON-8-EP(3x3)VSON-8-EP(3x3) Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsTPS3851H33EDRBT
VSON-8-EP(3x3)-40℃~+125℃ 1 1.6V~6.5V 19uA 200ms 3.3V Active Low Open Drain Voltage monitor Watchdog timer、Manual reset input VSON-8-EP(3x3) Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsTPS3851H33EDRBR
SON-8(3x3)-40℃~+125℃ 1 1.6V~6.5V 10uA 200ms 3.3V Active Low Open Drain Voltage monitor Watchdog timer、Manual reset input SON-8(3x3) Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
Questions
Is there a KiCad symbol and footprint for the TPS3431SDRB?
Yes. The symbol is EasyEDA_Cloud:TPS3431SDRBR and the footprint EasyEDA_Cloud:VSON-8_L3.0-W3.0-P0.65-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS3431SDRB?
VDFN-8-EP(3x3), with 9 pins. Its footprint is drawn on this page.
Where is the TPS3431SDRB datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS3431SDRB?
JLCPCB lists it as part C702145, with 22 in stock; the sellers' links on this page open their listings.
What can replace the TPS3431SDRB?
Parts like it in the library: the TLC7701IDRBT-NM by Texas Instruments, the TPS3851H33EDRBT by Texas Instruments and the TPS3851H33EDRBR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.