
TPS26631PWPR
Texas InstrumentsExtended
-40℃~+125℃ 1 1.2mm 31mΩ 4.4mm 4.5V~60V 6.5mm 600mA~6A Integrated FET Overcurrent Protection、Short-Circuit Protection、Under-voltage lockout、Thermal Protection、Overvoltage clamping protection、Overload protection Surface Mount HTSSOP-20 Surge Protection Devices (SPDs) ROHS
- Part id
- ti/TPS26631PWPR
- Category
- Surge Protection Devices (SPDs)
- Package
- HTSSOP-20
- Pins
- 21
- In stock
- 170 at JLCPCB (C2866319)
- Used on
- 2 open-source boards
Overview
The TPS26631PWPR is a surge Protection Device made by Texas Instruments in a HTSSOP-20 package with 21 pins. -40℃~+125℃ 1 1.2mm 31mΩ 4.4mm 4.5V~60V 6.5mm 600mA~6A Integrated FET Overcurrent Protection、Short-Circuit Protection、Under-voltage lockout、Thermal Protection、Overvoltage clamping protection、Overload protection Surface Mount HTSSOP-20 Surge Protection Devices (SPDs) ROHS.
PCBKit's library has its KiCad symbol (Power_Management:TPS26631PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm, from KiCad's library), ready for a KiCad board. 170 are in stock at JLCPCB (part C2866319). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | IN | Power in |
| 2 | IN | Passive |
| 3 | IN | Passive |
| 4 | B_GATE | Output |
| 5 | DRV | Output |
| 6 | IN_SYS | Power in |
| 7 | UVLO | Input |
| 8 | OVP | Input |
| 9 | GND | Power in |
| 10 | dVdT | Passive |
| 11 | ILIM | Passive |
| 12 | MODE | Input |
| 13 | SHDN | Input |
| 14 | IMON | Output |
| 15 | FLT | Open collector |
| 16 | PGTH | Input |
| 17 | PGOOD | Output |
| 18 | OUT | Power out |
| 19 | OUT | Passive |
| 20 | OUT | Passive |
| 21 | GND | Passive |
Open-source boards using it
2- 2 layers74.5 × 40 mm

- 4 layers130 × 92 mm

Usb hub 3s v2
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
119 parts3MIT
Parts like it
3TPS26633PWP
HTSSOP-20-40℃~+125℃ 60V HTSSOP-20 Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)TPS16630PWP
HTSSOP-20-40℃~+125℃ 1 1.2mm 30.44mΩ 4.4mm 4.5V~60V 6.5mm 600mA~6A Integrated FET Overcurrent Protection、Short-Circuit Protection、Under-voltage lockout、Thermal Protection、Overvoltage clamping protection、Overload protection Surface Mount HTSSOP-20 Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)TPS26631PWPT
HTSSOP-20-EP-40℃~+125℃ 1 1.7mA 4.5V~60V Manual reset input Open-drain HTSSOP-20-EP Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)
Questions
Is there a KiCad symbol and footprint for the TPS26631PWPR?
Yes. The symbol is Power_Management:TPS26631PWP and the footprint Package_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS26631PWPR?
HTSSOP-20, with 21 pins. Its footprint is drawn on this page.
Where is the TPS26631PWPR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS26631PWPR?
JLCPCB lists it as part C2866319, with 170 in stock; the sellers' links on this page open their listings.
What can replace the TPS26631PWPR?
Parts like it in the library: the TPS26633PWP by Texas Instruments, the TPS16630PWP by Texas Instruments and the TPS26631PWPT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TPS26631PWPR?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.