
TPS26600PWP
Texas Instruments
60V, 2A Industrial eFuse with Integrated Reverse Input Polarity Protection
- Part id
- ti/TPS26600PWP
- Category
- Uncategorised
- Package
- SSOP16
- Pins
- 17
- Used on
- 10 open-source boards
Overview
The TPS26600PWP is an uncategorised made by Texas Instruments in a SSOP16 package with 17 pins. 60V, 2A Industrial eFuse with Integrated Reverse Input Polarity Protection.
PCBKit's library has its KiCad symbol (Power_Management:TPS26600PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm, from KiCad's library), ready for a KiCad board. 10 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | IN | Power in |
| 2 | IN | Passive |
| 3 | UVLO | Input |
| 4 | NC | Not connected |
| 5 | OVP | Input |
| 6 | MODE | Input |
| 7 | SHDN | Input |
| 8 | RTN | Passive |
| 9 | GND | Power in |
| 10 | IMON | Output |
| 11 | ILIM | Passive |
| 12 | dVdT | Passive |
| 13 | NC | Not connected |
| 14 | FLT | Open collector |
| 15 | OUT | Power out |
| 16 | OUT | Passive |
| 17 | RTN | Passive |
- 2 layers25.4 × 42.9 mm

- 2 layers120 × 70 mm

Protected buck
Shanshan3133/automated-hardware-validation-framework
KiCad protected buck converter with Python-based automated hardware validation, fault injection, and CI reporting
35 parts - 6 layers87 × 81 mm

- 2 layers129.8 × 92.5 mm

Signalization by fireplace
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
204 parts1 - 2 layers129.8 × 92.5 mm

Signalization by fireplace
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
115 parts1 - 2 layers190 × 153.2 mm

Zone controller
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
1,117 parts1 - 2 layers190 × 153.2 mm

Zone controller
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
579 parts1 - 2 layers

Questions
Is there a KiCad symbol and footprint for the TPS26600PWP?
Yes. The symbol is Power_Management:TPS26600PWP and the footprint Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS26600PWP?
SSOP16, with 17 pins. Its footprint is drawn on this page.
Which open-source boards use the TPS26600PWP?
10 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.