TPS24710DGS
Texas InstrumentsExtended
-40℃~+85℃@(Ta) 1 3.4ms No Open Drain Yes VSSOP-10-0.5mm Supervisor and Reset ICs ROHS
- Part id
- ti/TPS24710DGS
- Category
- Monitors & Reset Circuits
- Package
- VSSOP-10-0.5mm
- Pins
- 10
- In stock
- 0 at JLCPCB (C1554044)
Overview
The TPS24710DGS is a monitors & Reset Circuit made by Texas Instruments in a VSSOP-10-0.5mm package with 10 pins. -40℃~+85℃@(Ta) 1 3.4ms No Open Drain Yes VSSOP-10-0.5mm Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SN24710DGSR, from EasyEDA) and its footprint (EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1554044).
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | PGb(PG) | Unspecified |
| 2 | EN | Unspecified |
| 3 | PROG | Unspecified |
| 4 | TIMER | Unspecified |
| 5 | GND | Unspecified |
| 6 | OUT | Unspecified |
| 7 | GATE | Unspecified |
| 8 | SENSE | Unspecified |
| 9 | VCC | Unspecified |
| 10 | FLTb(FLT) | Unspecified |
Parts like it
8
LM3710XQMM-308/NOPB
VSSOP-10-0.5mm-40℃~+85℃ 1 140ms 1V~5.5V 28uA 3.08V Active Low Open Drain Voltage Monitor Yes Yes VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsLM3710YQMM-232/NOPB
VSSOP-10-0.5mm-40℃~+85℃ 1 2.32V 280ms Active Low Open Drain Voltage Monitor Yes Yes VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS24713DGS
VSSOP-10-0.5mm-40℃~+125℃ 1 1.4mA 2.5V~18V 3.4ms No Open Drain VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsLM3704YCMM-232/NOPB
VSSOP-10-0.5mm-40℃~+85℃@(Ta) 1 2.32V 200ms Active Low Manual reset input Open-drain Voltage monitor VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsLM3704YCMM-308
VSSOP-10-0.5mm-40℃~+85℃@(TA) 1 200ms 3.08V Active Low Manual reset input Open-drain Voltage monitor VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsLM3710XKMM-463
VSSOP-10-0.5mm-40℃~+85℃ 1 200ms 4.63V Active Low Push-pull Voltage Monitor Yes Yes VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS2490DGSG4
VSSOP-10-0.5mm-40℃~+85℃@(TA) Open-drain Voltage monitor VSSOP-10-0.5mm Power Distribution Switches ROHSTexas InstrumentsMonitors & Reset CircuitsTPS2491DGSG4
VSSOP-10-0.5mm-40℃~+85℃@(TA) Open-drain Voltage monitor VSSOP-10-0.5mm Power Distribution Switches ROHSTexas InstrumentsMonitors & Reset Circuits
Questions
Is there a KiCad symbol and footprint for the TPS24710DGS?
Yes. The symbol is EasyEDA_Cloud:SN24710DGSR and the footprint EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS24710DGS?
VSSOP-10-0.5mm, with 10 pins. Its footprint is drawn on this page.
Where is the TPS24710DGS datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS24710DGS?
JLCPCB lists it as part C1554044, with 0 in stock; the sellers' links on this page open their listings.
What can replace the TPS24710DGS?
Parts like it in the library: the LM3710XQMM-308/NOPB by Texas Instruments, the LM3710YQMM-232/NOPB by Texas Instruments, the TPS24713DGS by Texas Instruments and the LM3704YCMM-232/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.