Skip to the content
12345678910111213141516171819202122232425262728

TPS23861PW

Texas InstrumentsExtended

-40℃~+85℃ 25.5W 3.3V 4 44V~57V IEEE 802.3 at(PoE+) PD detection and disconnect identification、Undervoltage Protection、Thermal Protection、Overcurrent Protection、Dual event classification detection Power Sourcing Equipment (PSE) TSSOP-28 Power Over Ethernet (PoE) Controllers ROHS

Part id
ti/TPS23861PW
Category
Power Over Ethernet (PoE) Controllers
Package
TSSOP-28
Pins
28
In stock
579 at JLCPCB (C93245)
Used on
3 open-source boards

Overview

The TPS23861PW is a power Over Ethernet (PoE) Controller made by Texas Instruments in a TSSOP-28 package with 28 pins. -40℃~+85℃ 25.5W 3.3V 4 44V~57V IEEE 802.3 at(PoE+) PD detection and disconnect identification、Undervoltage Protection、Thermal Protection、Overcurrent Protection、Dual event classification detection Power Sourcing Equipment (PSE) TSSOP-28 Power Over Ethernet (PoE) Controllers ROHS.

PCBKit's library has its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. 579 are in stock at JLCPCB (part C93245). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345678910111213141516171819202122232425262728
Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmFrom KiCad's library

From the datasheet

15
Supply, least
3 V · VDD, recommended operating min · p. 4
Supply, most
3.6 V · VDD, recommended operating max · p. 4
Supply, least
44 V · VPWR, recommended operating min · p. 4
Supply, most
57 V · VPWR, recommended operating max · p. 4
Supply, absolute maximum
4 V · VDD, absolute max · p. 4
Supply, absolute maximum
70 V · VPWR, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Junction, hottest
125 °C · Operating junction temperature max · p. 4
Takes working
8.5 mA · sum of VDD and VPWR typical supply currents, VPWR = 57V · p. 5
A pin gives at most
20 mA · INT, SDAO sinking current absolute max · p. 4
Junction to air (PW (TSSOP))
70.9 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (PW (TSSOP))
16.2 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (PW (TSSOP))
28.2 K/W · Junction-to-board thermal resistance · p. 5
Takes working
5 mA · VDD operating supply current, typical · p. 95

What it is and has

11
PoE controller
IEEE 802.3at, quad port PSE · p. 1
Automatic detection
Detection and classification · p. 1
Automatic power control
Turn-on and disconnect · p. 1
Current sensing
Kelvin current sensing · p. 1
Detection
4-point · p. 1
Default operating mode
Automatic · p. 1
Control interface
Optional I2C control and monitoring · p. 1
Package
TSSOP 28, 9.8mm x 6.6mm · p. 1
PoE controller
IEEE 802.3at, four PSE ports · p. 1
Automatic detection and classification
Auto Detect, classification · p. 1
Automatic port control
Auto Turn-On and disconnect · p. 1

Around it

9
cap 0.1μF
between VDD and DGND; Supply bypass capacitor. · p. 3
cap 0.1μF
between VPWR and AGND; Supply bypass capacitor. · p. 3
res 47Ω
between DRAIN1 and Port 1 output; Output voltage monitor connection. · p. 3
res 22Ω
between SEN1 and Port 1 current-sense resistor; Series connection to current-sense resistor. · p. 3
cap 0.1 µF
between VPWR and GND; CVPWR: 100V X7R ceramic bypass capacitor at pin 28. · p. 89
cap 0.1 µF
between VDD and GND; CVDD: 50V X7R ceramic bypass capacitor at pin 1. · p. 89
cap 0.1-µF
between VPWR and Pn-; CPn: 100V X7R ceramic, per port. · p. 89
res 47Ω
between DRAINn and QPn drain; RDRNn: 5%, 0.1W, 0603 SMT, per port. · p. 89
res 22.1Ω
between SENn and QPn source; RSENn: 1%, 0.1W, 0603 SMT, per port. · p. 89

Specifications

150
ParameterConditionsAs printedPage
Input voltageVPWRmin -0.3 · max 70 V4
Input voltageVDDmin -0.3 · max 4 V4
VoltageAGNDmin -0.3 · max 0.3 V4
VoltageSDAI, SDAO, SCL, AIN, AOUT, SHTDWN, RESET, INT, A3min -0.3 · max 4 V4
Output voltageGATE1-4min -0.3 · max 13 V4
Input voltageSEN1-4, KSENSA, KSENSBmin -0.3 · max 3 V4
VoltageDRAIN1-4min -0.3 · max 70 V4
VoltageN/C pinmin 0 · max 70 V4
Sinking currentINT, SDAOmax 20 mA4
Lead temperature 1.6mm (1/16-inch) from case for 10 secondsmax 260 °C4
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±500 Vmax 500 V4
VVDD VVDDVoltages referenced to DGNDmin 3 · typ 3.3 · max 3.6 V4
VVPWR VVPWRVoltages referenced to DGNDmin 44 · typ 48 · max 57 V4
Voltage slew rate on DRAIN1-4max 1 V/us4
Operating junction temperature TJmin -40 · max 125 °C4
Operating free-air temperature TAmin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJAPW (TSSOP), 28 PINStyp 70.9 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)PW (TSSOP), 28 PINStyp 16.2 °C/W5
Junction-to-board thermal resistance RθJBPW (TSSOP), 28 PINStyp 28.2 °C/W5
Junction-to-top characterization parameter ψJTPW (TSSOP), 28 PINStyp 0.6 °C/W5
Junction-to-board characterization parameter ψJBPW (TSSOP), 28 PINStyp 27.8 °C/W5
VPWR current consumption IVPWRVVPWR = 57Vtyp 3.5 · max 7 mA5
VPWR UVLO falling threshold VUVLOPW_FInternal oscillator stops operatingmin 14.5 · max 17.5 V5
VPWR Undervoltage falling threshold VPUV_FVPUV for port de-assertionmin 25 · typ 26.5 · max 28 V5
VPWR UVLO rising threshold VUVLOPW_Rmin 15.5 · max 18.5 V5
VDD current consumption IVDDtyp 5 · max 6 mA5
VDD UVLO falling threshold VUVDD_FFor port turn offmin 2 · typ 2.2 · max 2.4 V5
VDD UVLO rising threshold VUVDD_Rmin 2.4 · typ 2.6 · max 2.8 V5
Hysteresis VDD UVLO VUVDD_HYStyp 0.4 V5
Detection current IDETFirst detection point, VVPWR – VDRAINn = 0Vmin 145 · typ 160 · max 190 uA5
Detection current IDET2nd detection point, VVPWR – VDRAINn = 0Vmin 235 · typ 270 · max 300 uA5
Detection current IDETHigh Current detection point, VVPWR – VDRAINn = 0Vmin 490 · typ 540 · max 585 uA5
2nd – 1st detection currents ΔIDETAt VVPWR – VDRAINn = 0 Vmin 98 · typ 110 · max 118 uA5
Open circuit detection voltage VdetectVVPWR – VDRAINnmin 17.5 · typ 19 · max 22 V5
Rejected resistance low range RREJ_LOWmin 0.85 · max 15 kΩ5
Rejected resistance high range RREJ_HImin 33 · max 50 kΩ5
Accepted resistance range RACCEPTmin 19 · typ 25 · max 26.5 kΩ5
Shorted port threshold RSHORTmax 350 Ω5
Open port threshold ROPENmin 55 kΩ5
Classification voltage VCLASSVVPWR – VDRAINn, VSENn ≥ 0mV, Iport ≥ 180 uAmin 15.5 · typ 18.5 · max 20.5 V5
Classification current limit ICLASS_LimVVPWR – VDRAINn = 0Vtyp 70 · max 90 mA5
Classification threshold current ICLASS_THClass 0-1min 5 · max 8 mA6
Classification threshold current ICLASS_THClass 1-2min 13 · max 16 mA6
Classification threshold current ICLASS_THClass 2-3min 21 · max 25 mA6
Classification threshold current ICLASS_THClass 3-4min 31 · max 35 mA6
Classification threshold current ICLASS_THClass 4- overcurrentmin 45 · max 51 mA6
Mark voltage VMARK4mA ≥ Iport ≥ 180 uA, VVPWR – VDRAINnmin 7 · max 10 V6
Mark sinking current Limit IMARK_LimVVPWR – VDRAINn = 0Vmin 10 · typ 70 · max 90 mA6
Gate drive voltage VGOHVGATEn, IGATE = –1uAmin 10 · max 12.5 V6
Gate sinking current with power-on reset, shutdown detected or port turn off command IGO-VGATEn = 5Vmin 80 · typ 100 mA6
Gate sinking current with port short-circuit IGO short–VGATEn = 5V, VSENn ≥ VSHORT (or VSHORT2X if 2x mode)min 80 · typ 100 · max 150 mA6
Gate sourcing current IGO+VGATEn = 0V, IGATE = 0min 39 · typ 50 · max 63 uA6
Gate sourcing current IGO+VGATEn = 0V, IGATE = 1min 18 · typ 25 · max 34 uA6
Power good threshold VPGTMeasured at VDRAINnmin 1 · typ 2.13 · max 3 V6
Shorted FET threshold VSHTMeasured at VDRAINnmin 4 · typ 6 · max 8 V6
Resistance from DRAINn to VPWR RDRAINAny operating mode except during detection or while the port is ON, including in device reset statemin 80 · typ 100 · max 190 kΩ6
DRAINn pin bias current IDRAINVDRAINn = 48V, port OFF (not in detection)max 1 uA6
DRAINn pin bias current IDRAINVVPWR - VDRAINn = 30V, port ONtyp 75 · max 100 uA6
Conversion time , A/D #1 to 4 TCONVAll ranges, each port currentmin 0.65 · typ 0.8 · max 1 ms6
ADC integration bandwidth (–3dB) ADCBWtyp 320 Hz6
Integration (averaging) time, current TINT_CUREach port, port ON currentmin 80 · typ 100 · max 125 ms6
Integration (averaging) time, detection TINT_DETMAINS bit = 0max 20 ms6
Powered port voltage conversion scale factor and accuracyAt VVPWR – VDRAINn = 57V, 0°C to 125°Cmin 15175 · typ 15565 · max 15955 Counts6
Powered port voltage conversion scale factor and accuracyAt VVPWR – VDRAINn = 44V, 0°C to 125°Cmin 11713 · typ 12015 · max 12316 Counts6
Powered port voltage conversion scale factor and accuracyAt VVPWR – VDRAINn = 57V, –40°C to 125°Cmin 15020 · typ 15565 · max 16110 Counts6
Powered port voltage conversion scale factor and accuracyAt VVPWR – VDRAINn = 44V, –40°C to 125°Cmin 11594 · typ 12015 · max 12436 Counts6
Powered port current conversion scale factor and accuracyAt port current = 770mAmin 12300 · typ 12616 · max 12932 Counts6
Powered port current conversion scale factor and accuracyAt port current = 7.5mAmin 90 · typ 123 · max 156 Counts6
Input voltage conversion scale factor and accuracyAt VVPWR = 57Vmin 15175 · typ 15565 · max 15955 Counts6
Input voltage conversion scale factor and accuracyAt VVPWR = 44Vmin 11713 · typ 12015 · max 12316 Counts6
Powered port voltage conversion offset VOSAt VVPWR – VDRAINn = 0.3 Vmin 0 · max 600 mV6
Voltage reading accuracy δV/VPORTAt 44V to 57V –40°C to 125°Cmin -3.5 · max 3.5 %7
Voltage reading accuracy δV/VPORTAt 44V to 57V 0°C to 125°Cmin -2.5 · max 2.5 %7
Current reading accuracy δI/IportAt 50mA to 770mAmin -2.5 · max 2.5 %7
ICUT limit VCUTVDRAINn = 0V, ICUT port n[2:0] = 000, defaultmin 90.6 · typ 95.37 · max 100.14 mV7
ICUT limit VCUTVDRAINn = 0V, ICUT port n[2:0] = 001min 26.65 · typ 28.05 · max 29.45 mV7
ICUT limit VCUTVDRAINn = 0V, ICUT port n[2:0] = 010min 49.42 · typ 52.02 · max 54.62 mV7
ICUT limit VCUTVDRAINn = 0V, ICUT port n[2:0] = 110min 156.27 · typ 164.5 · max 172.72 mV7
ICUT limit VCUTVDRAINn = 0V, ICUT port n[2:0] = 111min 222.87 · typ 234.6 · max 246.33 mV7
ICUT tolerance δICUT/ICUTmin -5 · max 5 %7
IInrush limit VINRUSHAt port turn on, VVPWR – VDRAINn = 1Vmin 10 · typ 23 · max 31 mV7
IInrush limit VINRUSHAt port turn on, VVPWR - VDRAINn = 10Vmin 20 · typ 33 · max 46 mV7
IInrush limit VINRUSHAt port turn on, VVPWR - VDRAINn = 30Vmin 102 · max 114.7 mV7
IInrush limit VINRUSHAt port turn on, VVPWR – VDRAINn = 55Vmin 102 · max 114.7 mV7
ILIM limit with PoEPn = 0 VLIMVDRAINn = 1Vmin 102 · max 114.7 mV7
ILIM limit with PoEPn = 0 VLIMVDRAINn = 13Vmin 102 · max 114.7 mV7
ILIM limit with PoEPn = 0 VLIMVDRAINn = 30Vmin 15 · typ 23 · max 31 mV7
ILIM limit with PoEPn = 0 VLIMVDRAINn = 48Vmin 15 · typ 23 · max 31 mV7
ILIM limit with PoEPn = 1 VLIM2XVDRAINn = 1Vmin 260 · typ 270.3 · max 285 mV7
ILIM limit with PoEPn = 1 VLIM2XVDRAINn = 10Vmin 127 · typ 140 · max 153 mV7
ILIM limit with PoEPn = 1 VLIM2XVDRAINn = 30Vmin 15 · typ 23 · max 31 mV7
ILIM limit with PoEPn = 1 VLIM2XVDRAINn = 48Vmin 15 · typ 23 · max 31 mV7
ISHORT threshold with PoEPn = 0 VSHORTThreshold for GATE to be less than 1V, 2 us after application of pulsemin 140 · max 183 mV7
ISHORT threshold with PoEPn = 1 VSHORT2XThreshold for GATE to be less than 1V, 2 us after application of pulsemin 357 · max 408 mV7
Sense pin bias current IBIASPort ON or during classmin -2.25 · max 0 uA7
Disconnect threshold VI(min)DCTHn = 00, defaultmin 1.275 · max 2.55 mV7
Disconnect threshold VI(min)DCTHn = 01min 2.55 · max 5.1 mV7
Disconnect threshold VI(min)DCTHn = 10min 5.1 · max 10.2 mV7
Disconnect threshold VI(min)DCTHn = 11min 8.5 · max 17 mV7
Digital input high VIHVVDD = 3.3Vmin 2.1 V7
Digital input low VILVVDD = 3.3Vmax 0.9 V7
Input voltage hysteresis (SCL, SDAI, AIN, A3, RESET, SHTDWN) VIT_HYSVVDD = 3.3Vmin 0.17 V7
Digital output Low, SDAO VOLVVDD = 3.3V, IOL = 9mAmax 0.4 V7
Digital output Low, INT VOLVVDD = 3.3V, IOL = 3mAmax 0.4 V7
Pullup resistor to VDD RpullupRESET, AIN, A3, SHTDWN; VVDD = 3.3Vmin 30 · typ 50 · max 80 kΩ7
Duty cycle of IPORT with current fault δIfaultmin 5.5 · max 6.7 %10
ICUT time limit tOVLDTICUT = 00, default as suppliedmin 50 · max 70 ms10
ICUT time limit tOVLDTICUT = 01min 25 · max 35 ms10
ICUT time limit tOVLDTICUT = 10min 100 · max 140 ms10
ICUT time limit tOVLDTICUT = 11min 200 · max 280 ms10
ILIM time limit tLIMPOEPn = 0, default as suppliedmin 50 · max 70 ms10
ILIM time limit tLIMPOEPn = 1, TLIM = 00min 50 · max 70 ms10
ILIM time limit tLIMPOEPn = 1, TLIM = 01min 28.4 · typ 30 · max 34 ms10
ILIM time limit tLIMPOEPn = 1, TLIM = 10min 14.7 · typ 15.5 · max 17 ms10
ILIM time limit tLIMPOEPn = 1, TLIM = 11min 9.025 · max 11.5 ms10
Maximum current limit duration in port start-up tSTARTTSTART = 00, default as suppliedmin 50 · max 70 ms10
Maximum current limit duration in port start-up tSTARTTSTART = 01min 25 · max 35 ms10
Maximum current limit duration in port start-up tSTARTTSTART = 10min 100 · max 140 ms10
Four-point detection duration tDETTime to complete a detectionmin 275 · max 500 ms10
Pause between detection attempts tDET_BOFFVVPWR – VDRAINn > 2.5Vmin 300 · typ 400 · max 500 ms10
Pause between detection attempts tDET_BOFFVVPWR – VDRAINn < 2.5Vmin 0 · max 150 ms10
Classification duration tCLE1st and 2nd class event, Auto Mode, Semi-Auto Mode, from detection completemin 6.5 · max 13 ms10
Classification duration tpdc1-event physical layer class timing, Auto Mode and Semi-Auto Mode, from detection completemin 6.5 · max 13 ms10
Classification duration tpdcManual mode, from beginning of classificationmin 6.5 · max 14 ms10
Mark duration tME1st and 2nd mark event, from class 4 completemin 6 · max 12 ms10
Port power-on delay tp(on)Manual mode, from port turn-on command to port turn on completedmax 4 ms10
Fault delay timing. Delay before next attempt to power a port following power removal due to fault condition tedICUT, ILIM or start fault, Auto Mode, Semi-Auto Mode, CLDN = 0X, default as suppliedmin 0.8 · typ 1 · max 1.2 s10
Fault delay timing. Delay before next attempt to power a port following power removal due to fault condition tedICUT, ILIM or start fault, Auto Mode, Semi-Auto Mode, CLDN = 10min 1.6 · typ 2 · max 2.4 s10
Fault delay timing. Delay before next attempt to power a port following power removal due to fault condition tedICUT, ILIM or start fault, Auto Mode, Semi-Auto Mode, CLDN = 11min 3.2 · typ 4 · max 4.8 s10
PD maintain power signature dropout time limit tMPDOTDIS = 00, default as suppliedmin 300 · max 400 ms10
PD maintain power signature dropout time limit tMPDOTDIS = 01min 75 · max 100 ms10
PD maintain power signature dropout time limit tMPDOTDIS = 10min 150 · max 200 ms10
PD maintain power signature dropout time limit tMPDOTDIS = 11min 600 · max 800 ms10
Gate turn-off time from SHTDWN input tD_off_SHDWNFrom SHTDWN to VGATEn < 1V, VSENn = 0Vmin 1 · max 5 us10
Gate turn-off time from port off command tP_off_CMDFrom port off command to VGATEn < 1V, VSENn = 0Vmax 900 us10
Gate turn-off time with RESET pin tP_off_RSTFrom RESET low to, VGATEn < 1V, VSENn = 0Vmin 1 · max 5 us11
Gate turn-off time from SENn input tD_off_SENPOEPn = 0, VDRAINn = 1V, from VSENn pulsed to 0.425Vmax 0.9 us11
Gate turn-off time from SENn input tD_off_SENPOEPn = 1, VDRAINn = 1V, from VSENn pulsed to 0.62Vmax 0.9 us11
Device power-on-reset delay tPORmax 23 ms11
Reset time duration from RESET pin tRESETmin 1 · max 5 us11
ICUT ICUTICUT PORT n Field = 000; PoEPn = 0; nominaltyp 374 mA93
ICUT ICUTICUT PORT n Field = 001; PoEPn = 0; nominaltyp 110 mA93
ICUT ICUTICUT PORT n Field = 010; PoEPn = 0; nominaltyp 204 mA93
ICUT ICUTICUT PORT n Field = 011; PoEPn = 0; nominaltyp 374 mA93
ICUT ICUTICUT PORT n Field = 100; PoEPn = 1; nominaltyp 754 mA93
ICUT ICUTICUT PORT n Field = 101; PoEPn = 1; nominaltyp 592 mA93
ICUT ICUTICUT PORT n Field = 110; PoEPn = 1; nominaltyp 645 mA93
ICUT ICUTICUT PORT n Field = 111; PoEPn = 1; nominaltyp 920 mA93

Pins, by the datasheet

28
1 VDD
Digital 3.3V supply; bypass to DGND using a 0.1uF capacitor. · p. 3
2 RESET
Active-low reset; internally pulled up to VDD. · p. 3
3 SCL
Serial clock input for I2C bus. · p. 3
4 SDAI
Serial data input; may connect to SDAO for non-isolated systems or systems with bidirectional I2C isolators. · p. 3
5 SDAO
Serial data output; may connect to SDAI for non-isolated systems or systems with bidirectional I2C isolators. · p. 3
6 INT
Active-low interrupt output, updated between I2C transactions. · p. 3
7 DGND
Digital ground. · p. 3
8 SEN3
Port 3 current-sense input; connect to current-sense resistor through a 22Ω resistor. · p. 3
9 DRAIN3
Port 3 output voltage monitor; connect to output port through a 47Ω resistor. · p. 3
10 GATE3
Port 3 gate-drive output. · p. 3
11 KSENSB
Kelvin point connection for SEN3 and SEN4. · p. 3
12 SEN4
Port 4 current-sense input; connect to current-sense resistor through a 22Ω resistor. · p. 3
13 DRAIN4
Port 4 output voltage monitor; connect to output port through a 47Ω resistor. · p. 3
14 GATE4
Port 4 gate-drive output. · p. 3
15 SEN1
Port 1 current-sense input; connect to current-sense resistor through a 22Ω resistor. · p. 3
16 DRAIN1
Port 1 output voltage monitor; connect to output port through a 47Ω resistor. · p. 3
17 GATE1
Port 1 gate-drive output. · p. 3
18 KSENSA
Kelvin point connection for SEN1 and SEN2. · p. 3
19 SEN2
Port 2 current-sense input; connect to current-sense resistor through a 22Ω resistor. · p. 3
20 DRAIN2
Port 2 output voltage monitor; connect to output port through a 47Ω resistor. · p. 3
21 GATE2
Port 2 gate-drive output. · p. 3
22 AGND
Analog ground. · p. 3
23 A3
I2C A3 address line; internally pulled up to VDD. · p. 3
24 SHTDWN
Low-priority ports shutdown. · p. 3
25 AIN
I2C address programming input; internally pulled up to VDD. · p. 3
26 AOUT
I2C address programming output. · p. 3
27 N/C
Used for regulatory voltage-spacing compliance; leave open. · p. 3
28 VPWR
Analog 48V supply; bypass to AGND using a 0.1uF capacitor. · p. 3

Ordering codes, by the datasheet

6
TPS23861PW
TSSOP (PW), 28 pins · 50 units, tube; operating temperature -40 to 125 °C · p. 99
TPS23861PW.A
TSSOP (PW), 28 pins · 50 units, tube; operating temperature -40 to 125 °C · p. 99
TPS23861PWR
TSSOP (PW), 28 pins · 2000 units, large tape and reel; operating temperature -40 to 125 °C · p. 99
TPS23861PWR.A
TSSOP (PW), 28 pins · 2000 units, large tape and reel; operating temperature -40 to 125 °C · p. 99
TPS23861PWRG4
TSSOP (PW), 28 pins · 2000 units, large tape and reel; operating temperature -40 to 125 °C · p. 99
TPS23861PWRG4.A
TSSOP (PW), 28 pins · 2000 units, large tape and reel; operating temperature -40 to 125 °C · p. 99

Open-source boards using it

3
  • 4 layers68.1 × 102.5 mmDC PoE Injector, the printed circuit board in 3D

    DC PoE Injector

    jwpleow/DC_PoE_Injector

    Midspan 802.3at PoE Injector, with DC power supply input, in KiCAD

    71 parts2
  • 4 layers125.5 × 100 mmCore, the printed circuit board in 3D

    Core

    KRuskowski/s5

    einheit s5 (S501) — 5-port managed PoE switch on Allwinner T113-S3

    236 parts
  • 2 layers37 × 29 mmB115 4x PoE PSE 13W TPS23861, the printed circuit board in 3D

    B115 4x PoE PSE 13W TPS23861

    skunkforce/b115_4x_PoE_PSE_13W_TPS23861

    to pull the submodules before opening the project with kicad.

    39 partsMIT

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the TPS23861PW?

Yes. the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS23861PW?

TSSOP-28, with 28 pins. Its footprint is drawn on this page.

Where is the TPS23861PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS23861PW?

JLCPCB lists it as part C93245, with 579 in stock; the sellers' links on this page open their listings.

What can replace the TPS23861PW?

Parts like it in the library: the MAX5922AEUI by Maxim Integrated (Analog Devices), the MAX5922BEUI+ by Analog Devices, the MAX5922AEUI+ by Maxim Integrated (Analog Devices) and the MAX5922BEUI+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS23861PW?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.