Skip to the content
123456789

TPS2378DDA

Texas InstrumentsExtended

-40℃~+125℃ 40V~57V Under-voltage lockout (UVLO) SO-8-EP Power Over Ethernet (PoE) Controllers ROHS

Part id
ti/TPS2378DDA
Category
Ethernet Transceivers
Package
SO-8-EP
Pins
9
In stock
6,048 at JLCPCB (C337500)
Used on
8 open-source boards

Overview

The TPS2378DDA is an ethernet Transceiver made by Texas Instruments in a SO-8-EP package with 9 pins. -40℃~+125℃ 40V~57V Under-voltage lockout (UVLO) SO-8-EP Power Over Ethernet (PoE) Controllers ROHS.

PCBKit's library has its KiCad symbol (TPS2378DDA:TPS2378DDA, from Antmicro) and its footprint (Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm, from KiCad's library), ready for a KiCad board. 6,048 are in stock at JLCPCB (part C337500). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

1VDD2DEN3CLS4VSS5RTN6CDB7T2P8APD9EP
TPS2378DDA:TPS2378DDAFrom Antmicro

Footprint

123456789
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mmFrom KiCad's library

From the datasheet

10
Supply, most
57 V · VDD, recommended operating max · p. 4
Supply, absolute maximum
100 V · VDD, absolute maximum · p. 4
Junction, hottest
125 °C · Recommended junction temperature max · p. 4
Takes working
285 µA · VDD operating current typical, 40 V to 57 V · p. 6
Takes at most
500 µA · VDD operating bias current max, 40 V to 57 V · p. 6
Gives
850 mA · RTN continuous pass current max · p. 4
Current limit
1 A · Pass device current limit typical, VRTN = 1.5 V · p. 5
Junction to air (SO-8 PowerPad™)
45.9 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (SO-8 PowerPad™)
28.8 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (SO-8 PowerPad™)
51.9 K/W · Junction-to-case top thermal resistance · p. 5

What it is and has

9
Function
IEEE 802.3at PoE high-power PD interface · p. 1
Adapter priority
Auxiliary power detect input · p. 10
DC/DC converter control
Converter enable · p. 1
Hotswap MOSFET
100 V, 0.5 Ω · p. 1
Operating current capacity
Up to 850 mA · p. 1
Operating current limit
1 A typical · p. 1
System-level ESD capability
15 kV and 8 kV · p. 1
Package
PowerPAD HSOP · p. 1
Protection
Thermal shutdown and current limit foldback · p. 10

Around it

7
cap 0.1 µF
between VDD and VSS; Supply bypass capacitor. · p. 3
res 24.9 kΩ ± 1%
between VDD and DEN; Recommended detection resistor RDEN. · p. 11
res 1270 Ω
between CLS and VSS; Classification resistor for Class 0. · p. 11
res 243 Ω
between CLS and VSS; Classification resistor for Class 1. · p. 11
res 137 Ω
between CLS and VSS; Classification resistor for Class 2. · p. 11
res 90.9 Ω
between CLS and VSS; Classification resistor for Class 3. · p. 11
res 63.4 Ω
between CLS and VSS; Classification resistor for Class 4. · p. 11

Specifications

63
ParameterConditionsAs printedPage
Input voltageVDD, DEN; with respect to VSSmin -0.3 · max 100 V4
Input voltageRTN; with I(RTN) = 0min -0.6 · max 100 V4
Input voltageCLS; do not apply voltages to this pinmin -0.3 · max 6.5 V4
Input voltageAPD to RTNmin -0.3 · max 19 V4
Input voltageCDB, T2P to RTNmin -0.3 · max 100 V4
Sinking currentCDB, T2Pmax 5 mA4
Sinking currentDENmax 1 mA4
Sourcing currentCLSmax 65 mA4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmax 500 V4
Electrostatic discharge V(ESD)IEC 61000-4-2 contact discharge; discharges applied to circuit of Figure 24 between RJ-45, adapter, and output voltage railsmax 8000 V4
Electrostatic discharge V(ESD)IEC 61000-4-2 air-gap discharge; discharges applied to circuit of Figure 24 between RJ-45, adapter, and output voltage railsmax 15000 V4
Input voltage rangeRTN, VDD; with respect to VSSmin 0 · max 57 V4
Input voltage rangeAPD to RTNmin 0 · max 18 V4
Input voltage rangeCDB, T2P to RTNmin 0 · max 57 V4
Sinking currentRTNmax 0.85 A4
Sinking currentCDB, T2Pmax 2 mA4
ResistanceCLS; voltage should not be externally applied to this pinmin 60 Ω4
Junction temperaturemin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS2378, SO-8 PowerPad™, 8 PINStyp 45.9 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)TPS2378, SO-8 PowerPad™, 8 PINStyp 51.9 °C/W5
Junction-to-board thermal resistance RθJBTPS2378, SO-8 PowerPad™, 8 PINStyp 28.8 °C/W5
Junction-to-top characterization parameter ψJTTPS2378, SO-8 PowerPad™, 8 PINStyp 8.9 °C/W5
Junction-to-board characterization parameter ψJBTPS2378, SO-8 PowerPad™, 8 PINStyp 28.7 °C/W5
Junction-to-case (bottom) thermal resistance RθJC(bot)TPS2378, SO-8 PowerPad™, 8 PINStyp 6.7 °C/W5
Bias currentDETECTION (DEN); DEN open, VVDD = 10.1 V, Measure ISUPPLY(VDD, RTN, DEN), Not in markmin 3 · typ 4.8 · max 12 uA5
Detection currentMeasure ISUPPLY(VDD, RTN, DEN), VDD = 1.4 Vmin 53.8 · typ 56.5 · max 58.3 uA5
Detection currentMeasure ISUPPLY(VDD, RTN, DEN), VDD = 10.1 V, Not in markmin 395 · typ 410 · max 417 uA5
Disable threshold VPD_DISDEN fallingmin 3 · typ 3.7 · max 5 V5
Hysteresis VPD_DISDETECTION (DEN)min 50 · typ 113 · max 200 mV5
Voltage threshold VAPDENVAPD rising, measure to VRTNmin 1.4 · typ 1.5 · max 1.6 V5
Voltage threshold VAPDHHysteresis, measure to VRTNmin 0.27 · typ 0.3 · max 0.33 V5
Sinking currentV(APD–RTN) = 5 V, measure IAPDmin 1 · typ 1.73 · max 3 uA5
Classification current ICLS13 V ≤ VVDD ≤ 21 V, Measure IVDD + IDEN + IRTN; RCLS = 1270 Ωmin 1.8 · typ 2.17 · max 2.6 mA5
Classification current ICLS13 V ≤ VVDD ≤ 21 V, Measure IVDD + IDEN + IRTN; RCLS = 243 Ωmin 9.9 · typ 10.6 · max 11.2 mA5
Classification current ICLS13 V ≤ VVDD ≤ 21 V, Measure IVDD + IDEN + IRTN; RCLS = 137 Ωmin 17.6 · typ 18.6 · max 19.4 mA5
Classification current ICLS13 V ≤ VVDD ≤ 21 V, Measure IVDD + IDEN + IRTN; RCLS = 90.9 Ωmin 26.5 · typ 27.9 · max 29.3 mA5
Classification current ICLS13 V ≤ VVDD ≤ 21 V, Measure IVDD + IDEN + IRTN; RCLS = 63.4 Ωmin 38 · typ 39.9 · max 42 mA5
Class lower threshold VCL_ONVVDD rising, ICLS ↑min 11.9 · typ 12.5 · max 13 V5
Class lower threshold VCL_HHysteresismin 1.4 · typ 1.6 · max 1.7 V5
Class upper threshold VCU_ONVVDD rising, ICLS↓min 21 · typ 22 · max 23 V5
Class upper threshold VCU_HHysteresismin 0.5 · typ 0.78 · max 0.9 V5
Mark reset threshold VMSRVVDD fallingmin 3 · typ 3.9 · max 5 V5
Mark state resistance2-point measurement at 5 V and 10.1 Vmin 6 · typ 10 · max 12 kΩ5
Leakage currentCLASSIFICATION (CLS); VVDD = 57 V, VCLS = 0 V, measure ICLSmax 1 uA5
On resistance rDS(on)PASS DEVICE (RTN)min 0.2 · typ 0.42 · max 0.75 Ω5
Input bias currentVVDD = VRTN = 30 V, measure IRTNmax 30 uA5
Current limitVRTN =1.5 Vmin 0.85 · typ 1 · max 1.2 A5
Inrush current limitVRTN = 2 V, VVDD: 20 V → 48 Vmin 100 · typ 140 · max 180 mA5
Inrush terminationPercentage of inrush currentmin 80 · typ 90 · max 99 %5
Foldback thresholdVRTN risingmin 11 · typ 12.3 · max 13.6 V5
Foldback deglitch timeVRTN rising to when current limit changes to inrush current limitmin 500 · typ 800 · max 1500 us6
Output low voltageCONVERTER DISABLE (CDB); Measure VCDB – VRTN, ICDB = 2 mA, VRTN = 2 V, VDD: 20 V → 48 Vtyp 0.27 · max 0.5 V6
Leakage currentCONVERTER DISABLE (CDB); VCDB = 57 V, VRTN = 0 Vmax 10 uA6
Output low voltage VT2PIT2P = 2 mA, after 2-event classification and inrush is complete, VRTN = 0 Vtyp 0.26 · max 0.6 V6
Leakage currentTYPE 2 PSE INDICATION (T2P); VT2P = 57 V, VRTN = 0 Vmax 10 uA6
UVLO rising threshold VUVLO_RVVDD risingmin 36.3 · typ 38.1 · max 40 V6
UVLO falling threshold VUVLO_RVVDD fallingmin 30.5 · typ 32 · max 33.6 V6
UVLO hysteresis VUVLO_Htyp 6.1 V6
ShutdownTHERMAL SHUTDOWN; TJ↑min 135 · typ 145 °C6
HysteresisTHERMAL SHUTDOWN; reference only, not part of published warranty specificationstyp 20 °C6
Operating current40 V ≤ VVDD ≤ 57 Vtyp 285 · max 500 uA6

Pins, by the datasheet

9
1 VDD
Connect to positive PoE input power rail; bypass with 0.1 uF to VSS. · p. 3
2 DEN
Connect 24.9 kΩ to VDD for detection; pull to VSS to disable pass MOSFET. · p. 3
3 CLS
Connect resistor from CLS to VSS to program classification current. · p. 3
4 VSS
Connect to negative power rail derived from PoE source. · p. 3
5 RTN
Drain of PoE pass MOSFET. · p. 3
6 CDB
Active low, open-drain converter disable output, referenced to RTN. · p. 3
7 T2P
Active low indicates type 2 PSE connected or APD active. · p. 3
8 APD
Raise 1.5 V above RTN to disable pass MOSFET and force T2P active. · p. 3
Pad Pad
Connect PowerPad to VSS with a large fill area to assist heat dissipation. · p. 3

Open-source boards using it

8
  • 4 layers128.5 × 40 mmScalenode cm4-baseboard, the printed circuit board in 3D

    Scalenode cm4-baseboard

    antmicro/scalenode-cm4-baseboard

    Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

    146 parts152Apache-2.0
  • 2 layers78.1 × 61 mmSTM32F107RBT6, the printed circuit board in 3D

    STM32F107RBT6

    jay94ks/elecdev

    My own custom development boards

    76 partsMIT
  • 4 layers70 × 100 mmSTM32POE, the printed circuit board in 3D

    STM32POE

    KunoDLK/POE-Test

    114 parts
  • 4 layers60 × 40 mmPoe trigger, the printed circuit board in 3D

    Poe trigger

    msaribekyan/cobalt-poe-trigger

    802.3af / 802.3at PoE trigger board

    25 parts
  • 2 layers195 × 95 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    11 parts2
  • 5 layers85 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    17 parts
  • 4 layers68.6 × 21 mmPico poe, the printed circuit board in 3D

    Pico poe

    rm-1n/conduit

    poe microcontroller with web IDE + firmware upload

    76 partsMIT

Questions

Is there a KiCad symbol and footprint for the TPS2378DDA?

Yes. The symbol is TPS2378DDA:TPS2378DDA and the footprint Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2378DDA?

SO-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the TPS2378DDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2378DDA?

JLCPCB lists it as part C337500, with 6,048 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS2378DDA?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.