Skip to the content
9

TPS22965DSG

Texas InstrumentsExtended

-40℃~+85℃ 1 16mΩ 6A 800mV~5.7V Active High Load Switch UDFN-8-EP(2x2) Power Distribution Switches ROHS

Part id
ti/TPS22965DSG
Category
Power Distribution Switches
Package
UDFN-8-EP(2x2)
Pins
9
In stock
13,396 at JLCPCB (C122837)
Used on
3 open-source boards

Overview

The TPS22965DSG is a power Distribution Switche made by Texas Instruments in a UDFN-8-EP(2x2) package with 9 pins. -40℃~+85℃ 1 16mΩ 6A 800mV~5.7V Active High Load Switch UDFN-8-EP(2x2) Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:TPS22965, from Tinkerforge) and its footprint (EasyEDA_Cloud:UDFN-8_L2.0-W2.0-P0.50-TL-EP, from EasyEDA), ready for a KiCad board. 13,396 are in stock at JLCPCB (part C122837). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1VIN2VIN3ON4VBIAS8VOUT7VOUT6CT5GND9PAD
tinkerforge:TPS22965From Tinkerforge

Footprint

9
EasyEDA_Cloud:UDFN-8_L2.0-W2.0-P0.50-TL-EPFrom EasyEDA

From the datasheet

14
Supply, least
800 mV · VIN, recommended operating min · p. 5
Supply, most
5.7 V · VIN, operating max, limited to VBIAS · p. 1
Supply, least
2.5 V · VBIAS, recommended operating min · p. 5
Supply, absolute maximum
6 V · VIN, absolute max · p. 5
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
105 °C · Operating free-air temperature max · p. 5
Junction, hottest
125 °C · Junction temperature absolute max · p. 5
Takes working
50 µA · VBIAS quiescent current typical, VIN = VON = VBIAS = 5 V, no load · p. 6
Takes working
20 µA · VBIAS quiescent current typical, VIN = VON = VBIAS = 2.5 V, no load · p. 7
Takes asleep
2 µA · VBIAS shutdown current max, VBIAS = 5 V, VON = GND, VOUT = 0 V · p. 6
Gives
6 A · Continuous switch current max, single channel · p. 5
Junction to air (DSG (WSON))
72.3 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (DSG (WSON))
42.1 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (DSG (WSON))
96.1 K/W · Junction-to-case (top) thermal resistance · p. 6

What it is and has

9
Switch channels
1 · p. 1
Continuous switch current
6 A maximum · p. 1
Quiescent current
50 µA · p. 1
Rise time
Configurable · p. 1
Quick output discharge
Yes; active high enable · p. 4
Package
SON, 8 pins, thermal pad · p. 1
ESD performance
2000-V HBM and 1000-V CDM · p. 1
Adjustable rise time
Capacitor on CT sets slew rate · p. 17
Quick output discharge
Integrated discharge resistor between VOUT and GND when disabled · p. 17

Around it

2
cap 1 µF minimum
between VIN and GND; Input capacitor; input bypass is recommended to minimize VIN dip. · p. 5
cap 1-µF
between VIN and GND; Optional ceramic input capacitor; place close to the pins. Higher capacitance can reduce input voltage drop. · p. 18

Specifications

72
ParameterConditionsAs printedPage
Input voltage VINOver operating free-air temperature range; relative to groundmin -0.3 · max 6 V5
Output voltage VOUTOver operating free-air temperature range; relative to groundmin -0.3 · max 6 V5
Bias voltage VBIASOver operating free-air temperature range; relative to groundmin -0.3 · max 6 V5
On voltage VONOver operating free-air temperature range; relative to groundmin -0.3 · max 6 V5
Maximum continuous switch current IMAXOver operating free-air temperature rangemax 6 A5
Maximum pulsed switch current IPLSpulse < 300 us, 2% duty cyclemax 8 A5
Maximum junction temperature TJmax 125 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±2000 Vmax 2000 V5
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±1000 Vmax 1000 V5
Input voltage VINMaximum VIN = VBIASmin 0.8 V5
Bias voltage VBIASmin 2.5 · max 5.7 V5
ON voltage VONmin 0 · max 5.7 V5
High-level input voltage, ON VIHVBIAS = 2.5 V to 5.7 Vmin 1.1 · max 5.7 V5
Low-level input voltage, ON VILVBIAS = 2.5 V to 5.7 Vmin 0 · max 0.5 V5
Input capacitor CINSee the Application Information sectionmin 1 uF5
Operating free-air temperature TAMay require derating for high power dissipation or poor package thermal resistancemin -40 · max 105 °C5
Junction-to-ambient thermal resistance RθJADSG (WSON), 8 PINStyp 72.3 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DSG (WSON), 8 PINStyp 96.1 °C/W6
Junction-to-board thermal resistance RθJBDSG (WSON), 8 PINStyp 42.1 °C/W6
Junction-to-top characterization parameter ψJTDSG (WSON), 8 PINStyp 3.3 °C/W6
Junction-to-board characterization parameter ψJBDSG (WSON), 8 PINStyp 42.5 °C/W6
Junction-to-case (bottom) thermal resistance RθJC(bot)DSG (WSON), 8 PINStyp 13.2 °C/W6
VBIAS quiescent current IQ VVBIASIOUT = 0 mA, VIN = VON = VBIAS = 5 V; TA = –40°C to +105°C; typical at 25°Ctyp 50 · max 75 uA6
VBIAS shutdown current ISD VBIASVBIAS = 5 V, VON = GND, VOUT = 0 V; TA = –40°C to +105°Cmax 2 uA6
VIN off-state supply current ISD VINVBIAS = 5 V, VON = GND, VOUT = 0 V, VIN = 5 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.005 · max 5 uA6
VIN off-state supply current ISD VINVBIAS = 5 V, VON = GND, VOUT = 0 V, VIN = 3.3 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.002 · max 3 uA6
VIN off-state supply current ISD VINVBIAS = 5 V, VON = GND, VOUT = 0 V, VIN = 1.8 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.002 · max 2 uA6
VIN off-state supply current ISD VINVBIAS = 5 V, VON = GND, VOUT = 0 V, VIN = 0.8 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.001 · max 1 uA6
ON pin input leakage current IONVBIAS = 5 V, VON = 5.5 V; TA = –40°C to +105°Cmax 0.5 uA6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 5 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 5 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 5 V; TA = –40°C to +105°Cmax 25 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 3.3 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 3.3 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 3.3 V; TA = –40°C to +105°Cmax 25 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.8 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.8 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.8 V; TA = –40°C to +105°Cmax 25 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.5 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.5 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.5 V; TA = –40°C to +105°Cmax 25 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.2 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.2 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 1.2 V; TA = –40°C to +105°Cmax 25 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 0.8 V; TA = 25°Ctyp 16 · max 21 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 0.8 V; TA = –40°C to +85°Cmax 23 mΩ6
ON-state resistance RONIOUT = –200 mA, VBIAS = 5 V, VIN = 0.8 V; TA = –40°C to +105°Cmax 25 mΩ6
Output pulldown resistance RPDTPS22965 only; VBIAS = 5 V, VIN = 5 V, VON = 0 V, IOUT = 15 mA; TA = –40°C to +105°C; typical at 25°Ctyp 225 · max 300 Ω6
VBIAS quiescent current IQ VVBIASIOUT = 0 mA, VIN = VON = VBIAS = 2.5 V; TA = –40°C to +105°C; typical at 25°Ctyp 20 · max 30 uA7
VBIAS shutdown current ISD VBIASVBIAS = 2.5 V, VON = GND, VOUT = 0 V; TA = –40°C to +105°Cmax 2 uA7
VIN off-state supply current ISD VINVBIAS = 2.5 V, VON = GND, VOUT = 0 V, VIN = 2.5 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.005 · max 3 uA7
VIN off-state supply current ISD VINVBIAS = 2.5 V, VON = GND, VOUT = 0 V, VIN = 1.8 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.002 · max 2 uA7
VIN off-state supply current ISD VINVBIAS = 2.5 V, VON = GND, VOUT = 0 V, VIN = 1.2 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.002 · max 2 uA7
VIN off-state supply current ISD VINVBIAS = 2.5 V, VON = GND, VOUT = 0 V, VIN = 0.8 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.001 · max 1 uA7
ON pin input leakage current IONVBIAS = 2.5 V, VON = 5.5 V; TA = –40°C to +105°Cmax 0.5 uA7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 2.5 V; TA = 25°Ctyp 20 · max 24 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 2.5 V; TA = –40°C to +85°Cmax 27 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 2.5 V; TA = –40°C to +105°Cmax 28 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.8 V; TA = 25°Ctyp 19 · max 23 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.8 V; TA = –40°C to +85°Cmax 26 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.8 V; TA = –40°C to +105°Cmax 28 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.5 V; TA = 25°Ctyp 18 · max 23 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.5 V; TA = –40°C to +85°Cmax 25 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.5 V; TA = –40°C to +105°Cmax 27 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.2 V; TA = 25°Cmin 0 · typ 18 · max 23 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.2 V; TA = –40°C to +85°Cmax 25 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 1.2 V; TA = –40°C to +105°Cmax 27 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 0.8 V; TA = 25°Ctyp 17 · max 22 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 0.8 V; TA = –40°C to +85°Cmax 25 mΩ7
ON-state resistance RONIOUT = –200 mA, VBIAS = 2.5 V, VIN = 0.8 V; TA = –40°C to +105°Cmax 27 mΩ7
Output pulldown resistance RPDTPS22965 only; VBIAS = 2.5 V, VIN = 2.5 V, VON = 0 V, IOUT = 1 mA; TA = –40°C to +105°C; typical at 25°Ctyp 275 · max 325 Ω7

Pins, by the datasheet

9
1 VIN
Switch input; connect both VIN pins; input bypass capacitor recommended to minimize VIN dip. · p. 4
2 VIN
Switch input; connect both VIN pins; input bypass capacitor recommended to minimize VIN dip. · p. 4
3 ON
Active high switch control input; do not leave floating. · p. 4
4 VBIAS
Bias supply to the device; recommended voltage range 2.5 V to 5.7 V. · p. 4
5 GND
Device ground. · p. 4
6 CT
Switch slew rate control; can be left floating. · p. 4
7 VOUT
Switch output. · p. 4
8 VOUT
Switch output. · p. 4
— Thermal Pad
Exposed center thermal pad to alleviate thermal stress; tie to GND. · p. 4

Ordering codes, by the datasheet

6
TPS22965DSGR
WSON (DSG), 8 pins · 3000 units, LARGE T&R; operating temperature -40 to 105 °C · p. 24
TPS22965DSGR.A
WSON (DSG), 8 pins · 3000 units, LARGE T&R; operating temperature -40 to 105 °C · p. 24
TPS22965DSGRG4
WSON (DSG), 8 pins · 3000 units, LARGE T&R; operating temperature -40 to 105 °C · p. 24
TPS22965DSGRG4.A
WSON (DSG), 8 pins · 3000 units, LARGE T&R; operating temperature -40 to 105 °C · p. 24
TPS22965DSGT
WSON (DSG), 8 pins · 250 units, SMALL T&R; operating temperature -40 to 105 °C · p. 24
TPS22965DSGT.A
WSON (DSG), 8 pins · 250 units, SMALL T&R; operating temperature -40 to 105 °C · p. 24

Open-source boards using it

3
  • 4 layers80 × 111 mmXray v3, the printed circuit board in 3D

    Xray v3

    shm-dmitry/xray-detector

    V3 version in progress. V2 version details:

    215 parts
  • 4 layers26 × 35 mmHSLinkPro, the printed circuit board in 3D

    HSLinkPro

    cherry-embedded/HSLink-hardware

    A place to release hslink hardware

    131 parts44Apache-2.0

Questions

Is there a KiCad symbol and footprint for the TPS22965DSG?

Yes. The symbol is tinkerforge:TPS22965 and the footprint EasyEDA_Cloud:UDFN-8_L2.0-W2.0-P0.50-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22965DSG?

UDFN-8-EP(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the TPS22965DSG datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22965DSG?

JLCPCB lists it as part C122837, with 13,396 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS22965DSG?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.