Skip to the content

TPS22913BYZVR

Texas InstrumentsExtended

-40℃~+85℃ 1 1.4V~5.5V 2A 60mΩ Active High Load Switch DSBGA-4 Power Distribution Switches ROHS

Part id
ti/TPS22913BYZVR
Category
Power Distribution Switches
Package
DSBGA-4
Pins
4
In stock
248 at JLCPCB (C544698)
Used on
1 open-source board

Overview

The TPS22913BYZVR is a power Distribution Switche made by Texas Instruments in a DSBGA-4 package with 4 pins. -40℃~+85℃ 1 1.4V~5.5V 2A 60mΩ Active High Load Switch DSBGA-4 Power Distribution Switches ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:DSBGA-4_L0.9-W0.9-R2-C2-P0.50-BL, from EasyEDA), ready for a KiCad board. 248 are in stock at JLCPCB (part C544698). 1 open-source board in 1 repository on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

EasyEDA_Cloud:DSBGA-4_L0.9-W0.9-R2-C2-P0.50-BLFrom EasyEDA

From the datasheet

12
Supply, least
1.4 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Junction, hottest
125 °C · Junction temperature absolute max · p. 4
Gives
2 A · Continuous switch current max · p. 4
Takes working
2 µA · VIN quiescent current typical, VIN = 5.25 V, enabled, no load · p. 5
Takes asleep
1.2 µA · VIN off supply current typical, VIN = 5.25 V, RL = 1 MΩ · p. 5
Junction to air (CSP)
189.1 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (CSP)
1.9 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (CSP)
36.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

6
Switch channels
1 · p. 1
Protection
Under-voltage lockout · p. 1
Protection
Full-time reverse current protection · p. 1
Enable
Active High · p. 3
Quick output discharge
Yes · p. 3
Rise time
66 µs typical at 3.3 V · p. 3

Around it

1
cap 1 µF
between VIN and GND; Optional ceramic input capacitor, placed close to the pins; CIN about 10 times the output capacitance is recommended when switching heavy loads. · p. 20

Specifications

57
ParameterConditionsAs printedPage
Input voltage range VINmin -0.3 · max 6 V4
Output voltage range VOUTmin -0.3 · max 6 V4
Input voltage range VONmin -0.3 · max 6 V4
Maximum continuous switch current IMAXmax 2 A4
Maximum pulsed switch current IPLSpulse < 300 us, 2% duty cyclemax 2.5 A4
Operating free-air temperature range TAmin -40 · max 85 °C4
Maximum junction temperature TJmax 125 °C4
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±1000 Vmax 1000 V4
Input voltage range VINmin 1.4 · max 5.5 V4
ON voltage range VONmin 0 · max 5.5 V4
High-level input voltage, ON VIHVIN = 1.4 V to 5.5 Vmin 1.1 · max 5.5 V4
Low-level input voltage, ON VILVIN = 3.61 V to 5.5 Vmax 0.6 V4
Low-level input voltage, ON VILVIN = 1.4 V to 3.6 Vmax 0.4 V4
Input capacitor CINRefer to the application sectionmin 1 uF4
Junction-to-ambient thermal resistance RθJATPS22913, CSP, 4 PINStyp 189.1 °C/W4
Junction-to-case (top) thermal resistance RθJCtopTPS22913, CSP, 4 PINStyp 1.9 °C/W4
Junction-to-board thermal resistance RθJBTPS22913, CSP, 4 PINStyp 36.8 °C/W4
Junction-to-top characterization parameter ψJTTPS22913, CSP, 4 PINStyp 11.3 °C/W4
Junction-to-board characterization parameter ψJBTPS22913, CSP, 4 PINStyp 36.8 °C/W4
Quiescent current IINIOUT = 0 mA, VIN = 5.25 V, VON = Enabled, TA = Fulltyp 2 · max 10 uA5
Quiescent current IINIOUT = 0 mA, VIN = 4.2 V, VON = Enabled, TA = Fulltyp 2 · max 7 uA5
Quiescent current IINIOUT = 0 mA, VIN = 3.6 V, VON = Enabled, TA = Fulltyp 2 · max 7 uA5
Quiescent current IINIOUT = 0 mA, VIN = 2.5 V, VON = Enabled, TA = Fulltyp 0.9 · max 5 uA5
Quiescent current IINIOUT = 0 mA, VIN = 1.5 V, VON = Enabled, TA = Fulltyp 0.7 · max 5 uA5
Off supply current IIN(off)RL = 1 MΩ, VIN = 5.25 V, VON = Disabled, TA = Fulltyp 1.2 · max 10 uA5
Off supply current IIN(off)RL = 1 MΩ, VIN = 4.2 V, VON = Disabled, TA = Fulltyp 0.2 · max 7 uA5
Off supply current IIN(off)RL = 1 MΩ, VIN = 3.6 V, VON = Disabled, TA = Fulltyp 0.1 · max 7 uA5
Off supply current IIN(off)RL = 1 MΩ, VIN = 2.5 V, VON = Disabled, TA = Fulltyp 0.1 · max 5 uA5
Off supply current IIN(off)RL = 1 MΩ, VIN = 1.5 V, VON = Disabled, TA = Fulltyp 0.1 · max 5 uA5
Leakage current IIN(Leakage)VOUT = 0 V, VIN = 5.25 V, VON = Disabled, TA = Fulltyp 1.2 · max 10 uA5
Leakage current IIN(Leakage)VOUT = 0 V, VIN = 4.2 V, VON = Disabled, TA = Fulltyp 0.2 · max 7 uA5
Leakage current IIN(Leakage)VOUT = 0 V, VIN = 3.6 V, VON = Disabled, TA = Fulltyp 0.1 · max 7 uA5
Leakage current IIN(Leakage)VOUT = 0 V, VIN = 2.5 V, VON = Disabled, TA = Fulltyp 0.1 · max 5 uA5
Leakage current IIN(Leakage)VOUT = 0 V, VIN = 1.5 V, VON = Disabled, TA = Fulltyp 0.1 · max 5 uA5
On-resistance rONVIN = 5.25 V, IOUT = –200 mA, TA = 25°Ctyp 60 · max 80 mΩ5
On-resistance rONVIN = 5.25 V, IOUT = –200 mA, TA = Fullmax 110 mΩ5
On-resistance rONVIN = 5.0 V, IOUT = –200 mA, TA = 25°Ctyp 60 · max 80 mΩ5
On-resistance rONVIN = 5.0 V, IOUT = –200 mA, TA = Fullmax 110 mΩ5
On-resistance rONVIN = 4.2 V, IOUT = –200 mA, TA = 25°Ctyp 60 · max 80 mΩ5
On-resistance rONVIN = 4.2 V, IOUT = –200 mA, TA = Fullmax 110 mΩ5
On-resistance rONVIN = 3.3 V, IOUT = –200 mA, TA = 25°Ctyp 60.7 · max 80 mΩ5
On-resistance rONVIN = 3.3 V, IOUT = –200 mA, TA = Fullmax 110 mΩ5
On-resistance rONVIN = 2.5 V, IOUT = –200 mA, TA = 25°Ctyp 63.4 · max 90 mΩ5
On-resistance rONVIN = 2.5 V, IOUT = –200 mA, TA = Fullmax 120 mΩ5
On-resistance rONVIN = 1.8 V, IOUT = –200 mA, TA = 25°Ctyp 74.2 · max 100 mΩ5
On-resistance rONVIN = 1.8 V, IOUT = –200 mA, TA = Fullmax 130 mΩ5
On-resistance rONVIN = 1.5 V, IOUT = –200 mA, TA = 25°Ctyp 83.9 · max 120 mΩ5
On-resistance rONVIN = 1.5 V, IOUT = –200 mA, TA = Fullmax 150 mΩ5
Output pull down resistance RPDTPS22913B/C, VIN = 3.3 V, IOUT = 30 mA, VON = 0, TA = 25°Ctyp 153 · max 200 Ω5
Under voltage lockout UVLOVIN increasing, VON = 0 V, IOUT = –100 mA, TA = Fullmax 1.2 V5
Under voltage lockout UVLOVIN decreasing, VON = 0 V, RL = 10 Ω, TA = Fullmin 0.5 V5
ON input leakage current IONVON = 1.4 V to 5.25 V or GND, TA = Fullmax 1 uA5
Reverse current voltage threshold VRCPTPS22913B/Ctyp 44 mV5
Reverse current response delay tDELAYVIN = 5 Vtyp 10 us5
Reverse current protection leakage after reverse current event. IRCP(leak)VOUT – VIN > VRCP, TA = 25°Ctyp 0.3 uA5

Pins, by the datasheet

4
A1 VOUT
Switch output. · p. 3
A2 VIN
Switch input; use a ceramic bypass capacitor to ground. · p. 3
B1 GND
Ground. · p. 3
B2 ON
Switch control input; do not leave floating. · p. 3

Open-source boards using it

1
  • 2 layers41.4 × 41.9 mmEarring, the printed circuit board in 3D

    Earring

    sequoia-hope/ultraroute

    PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

    105 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS22913BYZVR?

Yes. the footprint EasyEDA_Cloud:DSBGA-4_L0.9-W0.9-R2-C2-P0.50-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22913BYZVR?

DSBGA-4, with 4 pins. Its footprint is drawn on this page.

Where is the TPS22913BYZVR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22913BYZVR?

JLCPCB lists it as part C544698, with 248 in stock; the sellers' links on this page open their listings.

What can replace the TPS22913BYZVR?

Parts like it in the library: the SGM2578YG/TR by SG Micro, the TPS22907YZTR by Texas Instruments, the TPS22908YZTR by Texas Instruments and the TPS22910AYZVR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS22913BYZVR?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.