Skip to the content

TPS2117DRL

Texas InstrumentsExtended

Part id
ti/TPS2117DRL
Category
Analog Switches, Multiplexers
Package
SOT-5X3
Pins
8
In stock
4,538 at JLCPCB (C22399676)
Used on
10 open-source boards

Overview

The TPS2117DRL is an analog Switches, Multiplexer made by Texas Instruments in a SOT-5X3 package with 8 pins.

PCBKit's library has its KiCad symbol (TPS2117DRLR:TPS2117DRLR, from Antmicro) and its footprint (sot-583:SOT-583, from Antmicro), ready for a KiCad board. 4,538 are in stock at JLCPCB (part C22399676). 10 open-source boards in 8 repositories on GitHub use it.

Symbol

1GND2VOUT3VIN14PR15MODE6VIN28ST
TPS2117DRLR:TPS2117DRLRFrom Antmicro

Footprint

sot-583:SOT-583From Antmicro

From the datasheet

11
Supply, least
1.6 V · VIN1, recommended operating min · p. 4
Supply, most
5.5 V · VIN1, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN1, absolute max · p. 4
Works from
-40 °C · Ambient temperature min · p. 4
Works up to
105 °C · Ambient temperature max · p. 4
Takes working
1.37 µA · sum of VIN1 quiescent and VIN2 standby, typical, VIN1 powers VOUT, VIN1 > VIN2 + 0.1 V, 25°C · p. 5
Takes asleep
50 nA · VIN2 standby typical, VIN1 powers VOUT, VIN1 > VIN2 + 0.1 V, 25°C · p. 5
Gives
4 A · Maximum continuous current · p. 1
Junction to air (DRL (SOT))
111.7 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRL (SOT))
36.4 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DRL (SOT))
18.1 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

10
Input voltage range
1.6 V to 5.5 V · p. 1
Maximum continuous current
4 A · p. 1
On-resistance
20 mΩ (typical) · p. 1
Switchover mode
Priority mode · p. 1
Switchover mode
Manual mode · p. 1
Switchover mode
Diode mode · p. 1
Controlled output slew rate
1.3 ms (typical) at 3.3 V · p. 1
Protection
Reverse current blocking when VOUT > VINx · p. 1
Protection
Thermal shutdown · p. 1
Package
DRL (SOT, 8), 2.10 mm × 1.60 mm · p. 1

Around it

1
cap 100 µF
between VOUT and GND; Output capacitance in the typical application design example. · p. 15

Specifications

97
ParameterConditionsAs printedPage
Input voltage VIN1, VIN2over operating free-air temperature rangemin -0.3 · max 6 V4
Output voltage VOUTover operating free-air temperature rangemin -0.3 · max 6 V4
Control pin voltage VST, VPR1, VMODEover operating free-air temperature rangemin -0.3 · max 6 V4
Maximum output capacitance CMAXVINX = 5.5Vmax 1.5 mF4
Maximum output capacitance CMAXVINX = 6Vmax 220 uF4
Maximum current IMAXmax 4 A4
Maximum pulsed current IMAX,PLSMax duration 1ms, Duty cycle of 2%max 6.4 A4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per ANSI/ESDA/JEDEC JS-002, all pinsmin -500 · max 500 V4
Input voltage VIN1, VIN2over operating free-air temperature rangemin 1.6 · max 5.5 V4
Output voltage VOUTover operating free-air temperature rangemin 0 · max 5.5 V4
Control pin voltage VST, VMODE, VPR1over operating free-air temperature rangemin 0 · max 5.5 V4
Ambient temperature TAmin -40 · max 105 °C4
Junction-to-ambient thermal resistance RθJATPS2117, DRL (SOT), 8-PINStyp 111.7 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS2117, DRL (SOT), 8-PINStyp 36.4 °C/W4
Junction-to-board thermal resistance RθJBTPS2117, DRL (SOT), 8-PINStyp 18.1 °C/W4
Junction-to-top characterization parameter ΨJTTPS2117, DRL (SOT), 8-PINStyp 1.1 °C/W4
Junction-to-board characterization parameter ΨJBTPS2117, DRL (SOT), 8-PINStyp 17.9 °C/W5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 1.1 uA5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 1.9 uA5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 2 uA5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 0.22 uA5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 0.31 uA5
VIN1 standby current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 0.32 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 1.2 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 2 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 2.1 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 0.05 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 0.06 uA5
VIN2 standby current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 0.08 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 1.32 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 3.6 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 4.4 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 0.3 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 0.46 uA5
VIN1 quiescent current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 0.5 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 1.35 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 3.7 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 4.5 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 0.1 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 0.22 uA5
VIN2 quiescent current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 0.27 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = 25°Ctyp 0.1 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = –40°C to 85°Cmax 1.9 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = –40°C to 105°Cmax 5.3 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = 25°Ctyp 0.05 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = –40°C to 85°Cmax 1.6 uA5
VIN1 shutdown current ISD,VIN1MODE = 0 V, PR1 = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = –40°C to 105°Cmax 4.5 uA5
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = 25°Ctyp 0.05 uA6
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = –40°C to 85°Cmax 1.8 uA6
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = –40°C to 105°Cmax 4.5 uA6
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = 25°Ctyp 0.05 uA6
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = –40°C to 85°Cmax 1.4 uA6
VIN2 shutdown current ISD,VIN2MODE = 0 V, PR1 = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = –40°C to 105°Cmax 3.8 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 25°Ctyp 0.04 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 85°Ctyp 0.2 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 105°Ctyp 0.5 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 25°Ctyp 0.1 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 85°Ctyp 0.3 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5 V; VINx = 0 V, VINy = open; TA = 105°Ctyp 1 uA6
PR1 pin leakage IPR1TA = –40°C to 105°Cmax 0.05 uA6
MODE pin leakage IMODETA = –40°C to 105°Cmax 0.05 uA6
ST pin leakage ISTTA = –40°C to 105°Cmax 0.03 uA6
On-resistance RONVINx = 5 V; IOUT = 200 mA; TA = 25°Ctyp 18.5 · max 25 mΩ6
On-resistance RONVINx = 5 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 31 mΩ6
On-resistance RONVINx = 5 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 33 mΩ6
On-resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = 25°Ctyp 20 · max 26 mΩ6
On-resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 31 mΩ6
On-resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 33 mΩ6
On-resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = 25°Ctyp 20.5 · max 27 mΩ6
On-resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 34 mΩ6
On-resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 38 mΩ6
On-resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = 25°Ctyp 21 · max 28 mΩ6
On-resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 37 mΩ6
On-resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 40 mΩ6
Status pin VOL VOL,STIST = 1 mA; TA = –40°C to 105°Cmax 0.1 V6
Status pin response time tSTST pin pulled high to low; RST = 10 kΩ; TA = –40°C to 105°Ctyp 5 us6
PR1 reference voltage VREFTA = –40°C to 105°Cmin 0.92 · typ 1 · max 1.08 V6
MODE logic high level VIH, MODETA = –40°C to 105°Cmin 1 · max 5.5 V6
MODE logic low level VIL, MODETA = –40°C to 105°Cmin 0 · max 0.35 V6
VIN1/VIN2 comparator hysteresis VHYSTDiode Mode; TA = –40°C to 105°Ctyp 60 mV6
Reverse current blocking response time tRCBVOUT > selected VIN + 1 V; TA = –40°C to 105°Ctyp 2 us6
Reverse current blocking rising threshold (VOUT – VIN) VRCB,RTA = –40°C to 105°Ctyp 42 · max 70 mV6
Reverse current blocking falling threshold (VOUT – VIN) VRCB,FTA = –40°C to 105°Ctyp 17 · max 40 mV6
Reverse current blocking activation current IRCBTA = –40°C to 105°Ctyp 1.4 · max 4 A6
Thermal shutdown TSDVIN1 = VIN2typ 170 °C7
Thermal shutdown hysteresis TSDHYSVIN1 = VIN2typ 20 °C7
Switchover time, VINx = 5 V tSWRL = 10 Ω, CL = 10 uF; TA = 25°Ctyp 16 us7
Switchover time, VINx = 3.3 V tSWRL = 10 Ω, CL = 10 uF; TA = 25°Ctyp 15 us7
Switchover time, VINx = 1.8 V tSWRL = 10 Ω, CL = 10 uF; TA = 25°Ctyp 12 us7
Delay time, VINx = 5 V tDRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 1 ms7
Delay time, VINx = 3.3 V tDRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 1.2 ms7
Delay time, VINx = 1.8 V tDRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 1.4 ms7
Soft-start time, VINx = 5 V tSSRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 1.7 ms7
Soft-start time, VINx = 3.3 V tSSRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 1.3 ms7
Soft-start time, VINx = 1.8 V tSSRL = 100 Ω, CL = 10 uF; TA = 25°Ctyp 0.9 ms7

Pins, by the datasheet

8
1 GND
Device ground. · p. 3
2 VOUT
Output power. · p. 3
3 VIN1
Channel 1 input power. · p. 3
4 PR1
Selects VIN1 when high and VIN2 when low. · p. 3
5 MODE
Tie to VIN1 for Priority mode; pull up to an external voltage for manual mode. · p. 3
6 VIN2
Channel 2 input power. · p. 3
7 VOUT
Output power. · p. 3
8 ST
Open drain status pin, pulled low when VIN1 is not being used. · p. 3

Open-source boards using it

10See all 10
  • 4 layers61.4 × 37 mmNileswan, the printed circuit board in 3D

    Nileswan

    49bitcat/nileswan

    An open software WS/WSC/SC/PCv2 flash cart

    72 parts84GPL-3.0
  • 4 layers85 × 74.6 mmGPIO HAT 2, the printed circuit board in 3D

    GPIO HAT 2

    vicharak-in/Vaaman_LVDS_GPIO_Expansion_Board

    GPIO Lvds extension hat for Vicharak's Vaaman 0.1

    106 parts1
  • 6 layers100 × 90 mmFanCTRL, the printed circuit board in 3D

    FanCTRL

    Clamentos/FanCTRL

    Fully programmable PWM fan controller

    93 partsCC-BY-SA-4.0
  • 4 layers100 × 100 mmData logger, the printed circuit board in 3D

    Data logger

    Conor-Dunlop/FYP_datalogger

    render of the datalogger with power board (yes i know it need routed)

    176 parts
  • 2 layers63.5 × 40.6 mmRp2350a main board, the printed circuit board in 3D

    Rp2350a main board

    Crem2y/rp2350a_main_board

    rp2350a main board

    84 partsMIT
  • 4 layers39 × 119.5 mmFieldcam, the printed circuit board in 3D

    Fieldcam

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    136 parts
  • 2 layers100 × 56 mmPower, the printed circuit board in 3D

    Power

    Conor-Dunlop/FYP_datalogger

    render of the datalogger with power board (yes i know it need routed)

    109 parts

Questions

Is there a KiCad symbol and footprint for the TPS2117DRL?

Yes. The symbol is TPS2117DRLR:TPS2117DRLR and the footprint sot-583:SOT-583, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2117DRL?

SOT-5X3, with 8 pins. Its footprint is drawn on this page.

Where is the TPS2117DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2117DRL?

JLCPCB lists it as part C22399676, with 4,538 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS2117DRL?

10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.