Skip to the content
123456

TPL5110DDC

Texas Instruments

Nano-power System Timer for Power Gating

Part id
ti/TPL5110DDC
Category
Uncategorised
Package
SOT23-6
Pins
6
Used on
27 open-source boards

Overview

The TPL5110DDC is an uncategorised made by Texas Instruments in a SOT23-6 package with 6 pins. Nano-power System Timer for Power Gating.

PCBKit's library has its KiCad symbol (Timer:TPL5110, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 27 open-source boards in 15 repositories on GitHub use it.

Symbol

1VDD2GND3DELAY/M_DRV4DONE5DRV6EN/ONE_SHOT
Timer:TPL5110From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the TPL5110DDC
PinNameType
1VDDPower in
2GNDPower in
3DELAY/M_DRVInput
4DONEInput
5DRVOutput
6EN/ONE_SHOTInput

Open-source boards using it

27See all 27
  • 2 layers30.5 × 53.3 mmCnft tpl esp32cam, the printed circuit board in 3D

    Cnft tpl esp32cam

    Universidad-Cenfotec/Contraloria

    Este es el resultado de un proyecto de investigación en coordinación con la Contraloría General de la República de Costa Rica y la cooperación alemana GIZ, para el desarrollo de cámaras IoT de bajo costo, que permitan…

    19 parts9
  • 2 layers31.5 × 30 mmCE Makerverse Nano Power Timer, the printed circuit board in 3D

    CE Makerverse Nano Power Timer

    CoreElectronics/CE-Makerverse-Nano-Power-Timer

    This is the repo for the Core Electronics Makerverse Nano Power Timer.

    46 parts5
  • 2 layers89 × 36 mmShihen, the printed circuit board in 3D

    Shihen

    likeablob/shihen

    A device which colors your everyday (a bit).

    60 parts4MIT
  • 2 layers65 × 45 mmSticky pi hat, the printed circuit board in 3D

    Sticky pi hat

    sticky-pi/sticky-pi-device

    Hardware and software for the Sticky Pi devices

    41 parts4
  • 2 layers65.4 × 68 mmS3-27-epaper touch, the printed circuit board in 3D

    S3-27-epaper touch

    Uspizig/WifiWallSwitch

    A WallSwitch with a clever EINK Display that measures your Air Quality, measures Temperature, detects movement, measures Light Conditions... and many more.

    159 parts4
  • 2 layers52 × 30 mmESP32C6 gasometer, the printed circuit board in 3D

    ESP32C6 gasometer

    sneumeister/Gas-o-Meter2

    Automatically track your (energy) gas consumption based on counter wheel magnet

    13 parts2Apache-2.0
  • 2 layers100.1 × 50.8 mmStm32, the printed circuit board in 3D

    Stm32

    jonatlib/stm32-433mhz

    Testing program stm32-433mhz

    59 parts1
  • 2 layers20.3 × 57.2 mmDoor, the printed circuit board in 3D

    Door

    ViktorStiskala/ESP8266-door-sensor

    This design represents a small sensor intended to be triggered by a magnetic reed switch. It wakes upon closing the contact, reporting the information to the internet and going back to sleep.

    27 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPL5110DDC?

Yes. The symbol is Timer:TPL5110 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPL5110DDC?

SOT23-6, with 6 pins. Its footprint is drawn on this page.

What can replace the TPL5110DDC?

Parts like it in the library: the SRV05-4 by DongChen, the TPS62A01PDDC by Texas Instruments, the TD2263 by TDSEMIC and the UCC287506DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPL5110DDC?

27 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.