
TPIC6B595DW
Texas InstrumentsExtended
-40℃~+125℃ 1 150mA 150ns@5V,30pF 4.5V~5.5V Open-drain Serial-to-Serial or Parallel TPIC SOIC-20-300mil Shift Registers ROHS
- Part id
- ti/TPIC6B595DW
- Category
- Shift Registers
- Package
- SOIC-20-300mil
- Pins
- 20
- In stock
- 4,173 at JLCPCB (C7094)
- Used on
- 1 open-source board
Overview
The TPIC6B595DW is a shift Register made by Texas Instruments in a SOIC-20-300mil package with 20 pins. -40℃~+125℃ 1 150mA 150ns@5V,30pF 4.5V~5.5V Open-drain Serial-to-Serial or Parallel TPIC SOIC-20-300mil Shift Registers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Pro:TPIC6B595DWR, from EasyEDA Pro) and its footprint (Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, from KiCad's library), ready for a KiCad board. 4,173 are in stock at JLCPCB (part C7094). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 4.5 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 4
- Junction, hottest
- 150 °C · Operating virtual junction temperature max · p. 4
- Takes working
- 400 µA · VCC, typical at 5 MHz, 30 pF, all outputs off · p. 5
- Takes at most
- 5 mA · VCC, max at 5 MHz, 30 pF, all outputs off · p. 5
- Gives
- 150 mA · Continuous sink current max per output, all outputs on, TC = 25°C · p. 4
- Current limit
- 500 mA · Typical per output at TC = 25°C · p. 12
- Junction to air (DW (SOIC))
- 75.3 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DW (SOIC))
- 39.8 K/W · Junction-to-case top thermal resistance · p. 5
- Junction to board (DW (SOIC))
- 43.1 K/W · Junction-to-board thermal resistance · p. 5
- Edge
- 200 ns · Typical drain output rise time, VCC = 5 V, TC = 25°C, CL = 30 pF, ID = 100 mA · p. 6
What it is and has
5- Shift and storage registers
- 8-bit serial-in, parallel-out shift register feeding an 8-bit D-type storage register · p. 12
- Cascading
- Serial output supports cascading additional devices · p. 12
- Output clamp voltage
- 50 V · p. 1
- Avalanche energy
- 30 mJ · p. 1
- Output control
- Global PWM dimming through output enable · p. 12
Around it
1- cap 0.1 uF
- between VCC and GND; Supply bypass capacitor shown for each device in the typical application schematic. · p. 14
Specifications
49| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Logic supply voltage VCC | All voltages with respect to GND | min -0.3 · max 7 V | 4 |
| Logic input voltage VI | min -0.3 · max 7 V | 4 | |
| Power DMOS drain-to-source voltage VDS | Each power DMOS source is internally connected to GND | min -0.3 · max 50 V | 4 |
| Continuous source-to-drain diode anode current | min 0 · max 500 mA | 4 | |
| Pulsed source-to-drain diode anode current | Pulse duration ≤ 100 us and duty cycle ≤ 2% | min 0 · max 1 A | 4 |
| Pulsed drain current, each output, all outputs ON ID | TC = 25°C; pulse duration ≤ 100 us and duty cycle ≤ 2% | min 0 · max 500 mA | 4 |
| Continuous drain current, each output, all outputs ON ID | TC = 25°C | min 0 · max 150 mA | 4 |
| Peak drain current single output IDM | TC = 25°C; pulse duration ≤ 100 us and duty cycle ≤ 2% | min 0 · max 500 mA | 4 |
| Single-pulse avalanche energy EAS | See Figure 11 | min 0 · max 30 mJ | 4 |
| Avalanche current IAS | DRAIN supply voltage = 15 V, TJS = 25°C, L = 1.5 H, IAS = 200 mA; see Figure 11 | min 0 · max 500 mA | 4 |
| Operating virtual junction temperature TJ | min -40 · max 150 °C | 4 | |
| Operating case temperature TC | min -40 · max 125 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per AEC Q100-002; rating ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per AEC Q100-011; all pins; rating ±500 V | max 500 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per AEC Q100-011; corner pins (1, 10, 20, 11); rating ±750 V | max 750 V | 4 |
| Logic supply voltage VCC | min 4.5 · max 5.5 V | 4 | |
| Pulsed drain output current | TC = 25°C, VCC = 5 V, all outputs on; pulse duration ≤ 100 us and duty cycle ≤ 2%; limit TJ − TC to 10°C maximum | min -500 · max 500 mA | 4 |
| Setup time, SER IN high before SRCKM ↑ tsu | See Figure 9 | min 20 ns | 4 |
| Hold time, SER IN high after SRCKM ↑ th | See Figure 9 | min 20 ns | 4 |
| Pulse duration tw | See Figure 9 | min 40 ns | 4 |
| Junction-to-ambient thermal resistance RθJA | DW (SOIC), 20 pins | typ 75.3 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DW (SOIC), 20 pins | typ 39.8 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DW (SOIC), 20 pins | typ 43.1 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DW (SOIC), 20 pins | typ 15.4 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DW (SOIC), 20 pins | typ 42.6 °C/W | 5 |
| Drain-to-source breakdown voltage V(BR)DSX | ID = 1 mA | min 50 V | 5 |
| Source-to-drain diode forward voltage VSD | IF = 100 mA | typ 0.85 · max 1 V | 5 |
| High-level output voltage, SER OUT VOH | IOH = −20 uA, VCC = 4.5 V | min 4.4 · typ 4.49 V | 5 |
| High-level output voltage, SER OUT VOH | IOH = −4 mA, VCC = 4.5 V | min 4 · typ 4.2 V | 5 |
| Low-level output voltage, SER OUT VOL | IOL = 20 uA, VCC = 4.5 V | typ 0.005 · max 0.1 V | 5 |
| Low-level output voltage, SER OUT VOL | IOL = 4 mA, VCC = 4.5 V | typ 0.3 · max 0.5 V | 5 |
| High-level input current IIH | VCC = 5.5 V, VI = VCC | max 1 uA | 5 |
| Low-level input current IIL | VCC = 5.5 V, VI = 0 | max -1 uA | 5 |
| Logic supply current ICC | VCC = 5.5 V, all outputs OFF | typ 20 · max 100 uA | 5 |
| Logic supply current ICC | VCC = 5.5 V, all outputs ON | typ 150 · max 300 uA | 5 |
| Logic supply current at frequency ICC(FRQ) | fSRCK = 5 MHz, CL = 30 pF, all outputs off; see Figure 9 and Figure 2 | typ 0.4 · max 5 mA | 5 |
| Nominal current IN | VDS(on) = 0.5 V, IN = ID, TC = 85°C; see notes (1), (2), (3) | typ 90 mA | 5 |
| OFF-state drain current IDSX | VDS = 40 V, VCC = 5.5 V | typ 0.1 · max 5 uA | 5 |
| OFF-state drain current IDSX | VDS = 40 V, VCC = 5.5 V, TC = 125°C | typ 0.15 · max 8 uA | 5 |
| Static drain-source ON-state resistance rDS(on) | ID = 100 mA, VCC = 4.5 V; see notes (1), (2), Figure 3 and Figure 4 | typ 4.2 · max 5.7 Ω | 5 |
| Static drain-source ON-state resistance rDS(on) | ID = 100 mA, TC = 125°C, VCC = 4.5 V; see notes (1), (2), Figure 3 and Figure 4 | typ 6.8 · max 9.5 Ω | 5 |
| Static drain-source ON-state resistance rDS(on) | ID = 350 mA, VCC = 4.5 V; see notes (1), (2), Figure 3 and Figure 4 | typ 5.5 · max 8 Ω | 5 |
| Propagation delay time, low-to-high-level output from G tPLH | VCC = 5 V, TC = 25°C; CL = 30 pF, ID = 100 mA; see Figure 5, Figure 8 and Figure 9 | typ 150 ns | 6 |
| Propagation delay time, high-to-low-level output from G tPHL | VCC = 5 V, TC = 25°C; CL = 30 pF, ID = 100 mA; see Figure 5, Figure 8 and Figure 9 | typ 90 ns | 6 |
| Rise time, drain output tr | VCC = 5 V, TC = 25°C; CL = 30 pF, ID = 100 mA; see Figure 5, Figure 8 and Figure 9 | typ 200 ns | 6 |
| Fall time, drain output tf | VCC = 5 V, TC = 25°C; CL = 30 pF, ID = 100 mA; see Figure 5, Figure 8 and Figure 9 | typ 200 ns | 6 |
| Reverse-recovery-current rise time ta | VCC = 5 V, TC = 25°C; IF = 100 mA, di/dt = 10 A/us; see Figure 10 and notes (1), (2) | typ 100 ns | 6 |
| Reverse-recovery time trr | VCC = 5 V, TC = 25°C; IF = 100 mA, di/dt = 10 A/us; see Figure 10 and notes (1), (2) | typ 300 ns | 6 |
Pins, by the datasheet
20- 1 NC
- No internal connection. · p. 3
- 2 VCC
- Power supply. · p. 3
- 3 SERIN
- Serial data input. · p. 3
- 4 DRAIN0
- Open-drain output. · p. 3
- 5 DRAIN1
- Open-drain output. · p. 3
- 6 DRAIN2
- Open-drain output. · p. 3
- 7 DRAIN3
- Open-drain output. · p. 3
- 8 SRCLR
- Shift register clear, active-low. · p. 3
- 9 G
- Output enable, active-low. · p. 3
- 10 GND
- Power ground. · p. 3
- 11 GND
- Power ground. · p. 3
- 12 RCK
- Register clock. · p. 3
- 13 SRCK
- Shift register clock; pin number follows the top-view diagram. · p. 3
- 14 DRAIN4
- Open-drain output. · p. 3
- 15 DRAIN5
- Open-drain output. · p. 3
- 16 DRAIN6
- Open-drain output. · p. 3
- 17 DRAIN7
- Open-drain output. · p. 3
- 18 SEROUT
- Serial data output. · p. 3
- 19 GND
- Power ground. · p. 3
- 20 NC
- No internal connection. · p. 3
Ordering codes, by the datasheet
5- TPIC6B595DW
- SOIC, DW, 20 pins · Package quantity 25; operating temperature -40 to 125°C · p. 19
- TPIC6B595DWG4
- SOIC, DW, 20 pins · G4 orderable code; package quantity 25 · p. 19
- TPIC6B595DWR
- SOIC, DW, 20 pins · Package quantity 2000; operating temperature -40 to 125°C · p. 19
- TPIC6B595DWRG4
- SOIC, DW, 20 pins · G4 orderable code; package quantity 2000 · p. 19
- TPIC6B595N
- PDIP, N, 20 pins · Package quantity 20; operating temperature -40 to 125°C · p. 19
Open-source boards using it
1- 4 layers148.9 × 56 mm

Parts like it
5TPIC6595DW
SOIC-20-300mil-40℃~+125℃ 1.125W 250mA 4.5V~5.5V 8 Open-drain Serial-to-Parallel SOIC-20-300mil Shift Registers ROHSTexas InstrumentsShift RegistersTPIC6A595DW
SOIC-24-300mil-40℃~+125℃ 1 350mA 350mW 4.5V~5.5V 5MHz 8 Asynchronous clear function、Output enable Open-drain Serial-to-Serial or Parallel TPIC SOIC-24-300mil Shift Registers ROHSTexas InstrumentsShift RegistersCD4006AF/3
CERDIP-14-55℃~+125℃ 0.3mA 0.5mA 1 125ns@10V,15pF 18 3V~12V 500mW 5MHz CD4000 CERDIP-14 Shift Registers ROHSTexas InstrumentsShift RegistersDM93L28N
PDIP-162 4.5V~5.5V 8 PDIP-16 Shift RegistersonsemiShift RegistersCD4035AD3
DIP-16-55℃~+125℃ 0.31mA 0.62mA 1 3V~12V 4 5MHz Asynchronous clear function CD Parallel or Serial-to-Parallel DIP-16 Shift Registers ROHSTexas InstrumentsShift Registers
Questions
Is there a KiCad symbol and footprint for the TPIC6B595DW?
Yes. The symbol is EasyEDA_Pro:TPIC6B595DWR and the footprint Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPIC6B595DW?
SOIC-20-300mil, with 20 pins. Its footprint is drawn on this page.
Where is the TPIC6B595DW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPIC6B595DW?
JLCPCB lists it as part C7094, with 4,173 in stock; the sellers' links on this page open their listings.
What can replace the TPIC6B595DW?
Parts like it in the library: the TPIC6595DW by Texas Instruments, the TPIC6A595DW by Texas Instruments, the CD4006AF/3 by Texas Instruments and the DM93L28N by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TPIC6B595DW?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.