
TMUX2821DSG
Texas InstrumentsExtended
SON-8(2x2) Analog Switches, Multiplexers ROHS
- Part id
- ti/TMUX2821DSG
- Category
- Analog Switches, Multiplexers
- Package
- SON-8(2x2)
- Pins
- 9
- In stock
- 228 at JLCPCB (C53283916)
- Used on
- 1 open-source board
Overview
The TMUX2821DSG is an analog Switches, Multiplexer made by Texas Instruments in a SON-8(2x2) package with 9 pins. SON-8(2x2) Analog Switches, Multiplexers ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:TDFN-8_L2.0-W2.0-P0.50-BL-EP_DIALOG-SEMICONDUCTOR, from EasyEDA), ready for a KiCad board. 228 are in stock at JLCPCB (part C53283916). 1 open-source board in 1 repository on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
From the datasheet
13- Supply, least
- 1.8 V · VDD, recommended operating min · p. 5
- Supply, most
- 5.5 V · VDD, recommended operating max · p. 5
- Supply, absolute maximum
- 6 V · VDD, absolute max · p. 4
- Works from
- -40 °C · Ambient temperature, recommended min · p. 5
- Works up to
- 125 °C · Ambient temperature, recommended max · p. 5
- Junction, hottest
- 150 °C · Junction temperature, absolute max · p. 4
- Takes working
- 55 µA · VDD supply current, typical at 25°C; VDD = 1.6V to 5.5V, logic inputs = 0V, 5V, or VDD · p. 6
- Takes at most
- 140 µA · VDD supply current, max over –40°C to +125°C · p. 6
- A pin gives at most
- 30 mA · Logic control input pin current, absolute max magnitude · p. 4
- A pin gives at most
- 1.1 A · Source or drain continuous current per channel, max at 25°C, VDD = 3.3V; subject to total power dissipation limit · p. 5
- Junction to air (DSG)
- 70 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DSG)
- 85 K/W · Junction-to-case (top) thermal resistance · p. 5
- Junction to board (DSG)
- 36 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
11- Switch configuration
- 1:1 SPST, 2 channels · p. 1
- Beyond the supply signal range
- -5.5V to 5.5V · p. 1
- On-resistance
- 0.16Ω · p. 1
- On-resistance flatness
- 1.0mΩ · p. 1
- THD+N
- 0.001% (-100dB) · p. 1
- Protection
- Power-Off Protection · p. 1
- Logic compatibility
- 1.8V logic at 5V VDD · p. 1
- Logic compatibility
- 1.2V logic at 1.8V VDD · p. 1
- Logic pull-down
- Integrated pull-down resistor on logic pins · p. 1
- Logic protection
- Fail-safe logic · p. 1
- Switching
- Break-before-make · p. 1
Around it
1- cap 0.1 μF to 10 μF
- between VDD and GND; Supply decoupling; place as close to VDD as possible using low-impedance connections. MLCCs with low ESR and ESL are recommended. · p. 23
Specifications
58| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VDD to GND | Over operating free-air temperature range | min -0.5 · max 6 V | 4 |
| Logic control input pin voltage VSEL to GND | Over operating free-air temperature range | min -0.5 · max 6 V | 4 |
| Source or drain voltage (Sx, Dx) to ground VS or VD to GND | Over operating free-air temperature range | min -7.5 · max 7.5 V | 4 |
| Logic control input pin current ISEL | Over operating free-air temperature range | min -30 · max 30 mA | 4 |
| Ambient temperature TA | min -55 · max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Junction temperature TJ | max 150 °C | 4 | |
| Total power dissipation Ptot | max 750 mW | 4 | |
| Junction-to-ambient thermal resistance RθJA | DSG, 8 pins | typ 70 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DSG, 8 pins | typ 85 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DSG, 8 pins | typ 36 °C/W | 5 |
| Junction-to-top characterization parameter ΨJT | DSG, 8 pins | typ 4 °C/W | 5 |
| Junction-to-board characterization parameter ΨJB | DSG, 8 pins | typ 36 °C/W | 5 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | DSG, 8 pins | typ 15 °C/W | 5 |
| Positive power supply voltage VDD | Over operating free-air temperature range | min 1.8 · max 5.5 V | 5 |
| Signal path input/output voltage (source or drain pin) (Sx, D) VS or VD | Over operating free-air temperature range | min -5.5 · max 5.5 V | 5 |
| Address or enable pin voltage VSEL or VEN | Over operating free-air temperature range | min 0 · max 5.5 V | 5 |
| Ambient temperature TA | min -40 · max 125 °C | 5 | |
| CONTINUOUS CURRENT PER CHANNEL IDC | DSG; 25°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 1.1 A | 5 |
| CONTINUOUS CURRENT PER CHANNEL IDC | DSG; 85°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 0.87 A | 5 |
| CONTINUOUS CURRENT PER CHANNEL IDC | DSG; 125°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 0.27 A | 5 |
| RMS CURRENT PER CHANNEL IRMS | DSG; 25°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 1.1 A | 5 |
| RMS CURRENT PER CHANNEL IRMS | DSG; 85°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 1.1 A | 5 |
| RMS CURRENT PER CHANNEL IRMS | DSG; 125°C; VDD = 3.3V, GND = 0V; subject to Ptot limits | max 0.54 A | 5 |
| On-resistance RON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = 25°C | typ 0.16 · max 0.2 Ω | 6 |
| On-resistance RON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +85°C | max 0.225 Ω | 6 |
| On-resistance RON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +125°C | max 0.3 Ω | 6 |
| On-resistance mismatch between channels ΔRON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = 25°C | typ 0.001 · max 0.035 Ω | 6 |
| On-resistance mismatch between channels ΔRON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +85°C | max 0.04 Ω | 6 |
| On-resistance mismatch between channels ΔRON | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +125°C | max 0.06 Ω | 6 |
| On-resistance flatness RON FLAT | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = 25°C | typ 0.001 · max 0.015 Ω | 6 |
| On-resistance flatness RON FLAT | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +85°C | max 0.07 Ω | 6 |
| On-resistance flatness RON FLAT | VDD = 3.3V, GND = 0V; VS = –5V to +5V; ID = –100mA; TA = –40°C to +125°C | max 0.09 Ω | 6 |
| On-resistance drift RON DRIFT | VDD = 3.3V, GND = 0V; VS = 0V, IS = –100mA; TA = –40°C to +125°C | typ 0.001 Ω/°C | 6 |
| Source powered-off leakage current IS(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = 25°C | typ 0.02 uA | 6 |
| Source powered-off leakage current IS(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = –40°C to +85°C | min -0.1 · max 0.1 uA | 6 |
| Source powered-off leakage current IS(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = –40°C to +125°C | min -2 · max 2 uA | 6 |
| Drain powered-off leakage current ID(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = 25°C | typ 0.02 uA | 6 |
| Drain powered-off leakage current ID(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = –40°C to +85°C | min -0.1 · max 0.1 uA | 6 |
| Drain powered-off leakage current ID(POFF) | VDD = 0V; VS = +5V / 0V; VD = 0V / + 5V; GND = 0V; TA = –40°C to +125°C | min -2 · max 2 uA | 6 |
| Source off leakage current IS(OFF) | VDD = 3.3V, GND = 0V; switch off; VS = +5V / –5V; VD = –5V / + 5V; TA = 25°C | typ 0.02 uA | 6 |
| Source off leakage current IS(OFF) | VDD = 3.3V, GND = 0V; switch off; VS = +5V / –5V; VD = –5V / + 5V; TA = –40°C to +85°C | min -0.1 · max 0.1 uA | 6 |
| Source off leakage current IS(OFF) | VDD = 3.3V, GND = 0V; switch off; VS = +5V / –5V; VD = –5V / + 5V; TA = –40°C to +125°C | min -1 · max 1 uA | 6 |
| Channel on leakage current IS(ON), ID(ON) | VDD = 3.3V, GND = 0V; switch on; VS = VD = ±5V; one terminal at voltage, other floating; TA = 25°C | typ 0.02 uA | 6 |
| Channel on leakage current IS(ON), ID(ON) | VDD = 3.3V, GND = 0V; switch on; VS = VD = ±5V; one terminal at voltage, other floating; TA = –40°C to +85°C | min -0.1 · max 0.1 uA | 6 |
| Channel on leakage current IS(ON), ID(ON) | VDD = 3.3V, GND = 0V; switch on; VS = VD = ±5V; one terminal at voltage, other floating; TA = –40°C to +125°C | min -1 · max 1 uA | 6 |
| Logic voltage high VIH | VDD = 5.5V, GND = 0V; TA = –40°C to +125°C | min 1.2 · max 5.5 V | 6 |
| Logic voltage high VIH | VDD = 3.3V, GND = 0V; TA = –40°C to +125°C | min 1.1 · max 5.5 V | 6 |
| Logic voltage high VIH | VDD = 1.8V, GND = 0V; TA = –40°C to +125°C | min 0.8 · max 5.5 V | 6 |
| Logic voltage low VIL | VDD = 5.5V, GND = 0V; TA = –40°C to +125°C | min 0 · max 0.6 V | 6 |
| Logic voltage low VIL | VDD = 3.3V, GND = 0V; TA = –40°C to +125°C | min 0 · max 0.6 V | 6 |
| Logic voltage low VIL | VDD = 1.8V, GND = 0V; TA = –40°C to +125°C | min 0 · max 0.42 V | 6 |
| Input leakage current IIH | VDD = 3.3V, GND = 0V; TA = –40°C to +125°C; typical at 25°C | typ 1 · max 1.5 uA | 6 |
| Input leakage current IIL | VDD = 3.3V, GND = 0V; TA = –40°C to +125°C; typical at 25°C | min -10 · typ -1 nA | 6 |
| Logic input capacitance CIN | VDD = 3.3V, GND = 0V; TA = –40°C to +125°C; typical at 25°C | typ 5 pF | 6 |
| VDD supply current IDD | VDD = 1.6V to 5.5V, GND = 0V; logic inputs = 0V, 5V, or VDD; TA = 25°C | typ 55 · max 125 uA | 6 |
| VDD supply current IDD | VDD = 1.6V to 5.5V, GND = 0V; logic inputs = 0V, 5V, or VDD; TA = –40°C to +85°C | max 130 uA | 6 |
| VDD supply current IDD | VDD = 1.6V to 5.5V, GND = 0V; logic inputs = 0V, 5V, or VDD; TA = –40°C to +125°C | max 140 uA | 6 |
Pins, by the datasheet
9- 1 S1
- Source pin 1; can be an input or output. · p. 3
- 2 D1
- Drain pin 1; can be an input or output. · p. 3
- 3 SEL2
- Logic control input; controls the switch connection. · p. 3
- 4 GND
- Ground (0V) reference. · p. 3
- 5 S2
- Source pin 2; can be an input or output. · p. 3
- 6 D2
- Drain pin 2; can be an input or output. · p. 3
- 7 SEL1
- Logic control input; controls the switch connection. · p. 3
- 8 VDD
- Positive power supply; connect a 0.1uF to 10uF decoupling capacitor between VDD and GND. · p. 3
- Thermal Pad GND
- Ground (0V) reference. · p. 3
Ordering codes, by the datasheet
1- TMUX2821DSGR
- WSON (DSG) | 8 · 3000 | LARGE T&R; operating temperature -40 to 125°C; marking T282 · p. 26
Open-source boards using it
1- 6 layers90.2 × 95.9 mm

Parts like it
2SLG55583V
TDFN-8-EP(2x2)1GHz 1us 20us 4.5V~5.5V 4pF 4Ω 60ps TDFN-8-EP(2x2) Analog Switches, Multiplexers ROHSRenesas ElectronicsAnalog Switches, MultiplexersSLG55584AV
TDFN-8-EP(2x2)100us 1GHz 2 4.5V~5.5V 5.5pF 5us 60ps 7Ω TDFN-8-EP(2x2) Analog Switches, Multiplexers ROHSRenesas ElectronicsAnalog Switches, Multiplexers
Questions
Is there a KiCad symbol and footprint for the TMUX2821DSG?
Yes. the footprint EasyEDA_Cloud:TDFN-8_L2.0-W2.0-P0.50-BL-EP_DIALOG-SEMICONDUCTOR, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TMUX2821DSG?
SON-8(2x2), with 9 pins. Its footprint is drawn on this page.
Where is the TMUX2821DSG datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TMUX2821DSG?
JLCPCB lists it as part C53283916, with 228 in stock; the sellers' links on this page open their listings.
What can replace the TMUX2821DSG?
Parts like it in the library: the SLG55583V by Renesas Electronics and the SLG55584AV by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TMUX2821DSG?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.