
TMP119AIYBGR
Texas InstrumentsExtended
-55℃~+150℃ 1.8V~5.5V 15.5ms 16bit 2uA Factory temperature calibration、Temperature threshold monitoring、Low-power standby、Configurable temperature output、On-chip non-volatile parameter storage、On-chip digital filtering/averaging I2C、SMBus ±0.08℃ DSBGA-6 Temperature Sensors ROHS
- Part id
- ti/TMP119AIYBGR
- Category
- Temperature Sensors
- Package
- DSBGA-6
- Pins
- 6
- In stock
- 4,944 at JLCPCB (C22428347)
- Used on
- 11 open-source boards
Overview
The TMP119AIYBGR is a temperature Sensor made by Texas Instruments in a DSBGA-6 package with 6 pins. -55℃~+150℃ 1.8V~5.5V 15.5ms 16bit 2uA Factory temperature calibration、Temperature threshold monitoring、Low-power standby、Configurable temperature output、On-chip non-volatile parameter storage、On-chip digital filtering/averaging I2C、SMBus ±0.08℃ DSBGA-6 Temperature Sensors ROHS.
PCBKit's library has its KiCad symbol (Sensor_Temperature:TMP119AIYBGR, from KiCad's library) and its footprint (Package_BGA:Texas_DSBGA-6_0.95x1.488mm_Layout2x3_P0.4mm, from KiCad's library), ready for a KiCad board. 4,944 are in stock at JLCPCB (part C22428347). 11 open-source boards in 9 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
13- Supply, least
- 1.8 V · V+, recommended operating min, TA = -55°C to 150°C · p. 6
- Supply, most
- 5.5 V · V+, recommended operating max, TA = -55°C to 150°C · p. 6
- Supply, least
- 1.7 V · V+, recommended operating min, TA = -55°C to 70°C · p. 6
- Supply, absolute maximum
- 6 V · V+, absolute max · p. 6
- Works from
- -55 °C · Operating free-air temperature min · p. 6
- Works up to
- 150 °C · Operating free-air temperature max · p. 6
- Junction, hottest
- 155 °C · Operating junction temperature absolute max · p. 6
- Takes working
- 16 µA · V+, typical, 1Hz with 8 averages, serial bus inactive, TA = 25°C · p. 8
- Takes at most
- 220 µA · V+, max during active conversion, serial bus inactive · p. 8
- Takes asleep
- 150 nA · V+, typical shutdown, serial bus inactive, TA = 25°C · p. 8
- Junction to air (YBG (DSBGA))
- 133.2 K/W · Junction-to-ambient thermal resistance · p. 6
- Junction to case (YBG (DSBGA))
- 1 K/W · Junction-to-case (top) thermal resistance · p. 6
- Junction to board (YBG (DSBGA))
- 40.9 K/W · Junction-to-board thermal resistance · p. 6
What it is and has
8- Temperature resolution
- 16-bit, 0.0078°C (1LSB) · p. 1
- Temperature accuracy
- ±0.08°C maximum from 0°C to 45°C · p. 1
- General-purpose EEPROM
- 48 bits · p. 1
- Interface
- SMBus, I2C · p. 1
- Temperature alert
- Programmable limits · p. 1
- Averaging
- Selectable · p. 1
- Traceability
- NIST · p. 1
- Package
- YBG, 6-pin DSBGA, 0.95mm x 1.488mm · p. 1
Around it
2- cap 0.1µF
- between V+ and GND; Bypass capacitor; ceramic with a temperature rating matching the application; place as close as possible to V+. · p. 28
- res 5kΩ
- between SDA and V+; Recommended pullup; value may be lower or higher depending on the application. · p. 28
Specifications
53| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage V+ | Over free-air temperature range | min -0.3 · max 6 V | 6 |
| Voltage at | SCL, SDA, ALERT and ADD0 | min -0.3 · max 6 V | 6 |
| Operating junction temperature TJ | min -55 · max 155 °C | 6 | |
| Storage temperature Tstg | min -65 · max 155 °C | 6 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | max 2000 V | 6 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 V | max 1000 V | 6 |
| Supply voltage V+ | TA = -55 °C to 150 °C; 3.3 V is nominal | min 1.8 · typ 3.3 · max 5.5 V | 6 |
| Supply voltage V+ | TA = -55 °C to 70 °C | min 1.7 · max 5.5 V | 6 |
| SCL, SDA, ALERT and ADD0 VI/O | min 0 · max 5.5 V | 6 | |
| Operating free-air temperature TA | min -55 · max 150 °C | 6 | |
| Junction-to-ambient thermal resistance RθJA | TMP119, YBG (DSBGA), 6 PINS | typ 133.2 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | TMP119, YBG (DSBGA), 6 PINS | typ 1 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | TMP119, YBG (DSBGA), 6 PINS | typ 40.9 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | TMP119, YBG (DSBGA), 6 PINS | typ 0.1 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | TMP119, YBG (DSBGA), 6 PINS | typ 40.7 °C/W | 6 |
| Thermal Mass MT | TMP119, YBG (DSBGA), 6 PINS | typ 0.7 mJ/°C | 6 |
| Temperature accuracy | TMP119; 0°C to 45°C; 8 averages, 1-Hz conversion cycle; I2C input VIL ≤ 0.05 * V+, VIH ≥ 0.95 * V+; typical is ± | min -0.08 · typ 0.03 · max 0.08 °C | 7 |
| Temperature accuracy | TMP119; –25°C to 85°C; 8 averages, 1-Hz conversion cycle; I2C input VIL ≤ 0.05 * V+, VIH ≥ 0.95 * V+; typical is ± | min -0.09 · typ 0.03 · max 0.09 °C | 7 |
| Temperature accuracy | TMP119; –40°C to 85°C; 8 averages, 1-Hz conversion cycle; I2C input VIL ≤ 0.05 * V+, VIH ≥ 0.95 * V+; typical is ± | min -0.12 · typ 0.06 · max 0.12 °C | 7 |
| Temperature accuracy | TMP119; –55°C to 125°C; 8 averages, 1-Hz conversion cycle; I2C input VIL ≤ 0.05 * V+, VIH ≥ 0.95 * V+; typical is ± | min -0.15 · typ 0.06 · max 0.15 °C | 7 |
| Temperature accuracy | TMP119; –55°C to 150°C; 8 averages, 1-Hz conversion cycle; I2C input VIL ≤ 0.05 * V+, VIH ≥ 0.95 * V+; typical is ± | min -0.2 · typ 0.06 · max 0.2 °C | 7 |
| DC power supply sensitivity | One-shot mode, 8 internal averages | typ 6 m°C/V | 7 |
| Response Time | t63% step; Stirred liquid; 31mil thick rigid PCB | typ 1 s | 7 |
| Gain Error | Maximum Temp Error Drift over 10°C | min -0.04 · max 0.04 °C | 7 |
| Temperature resolution (LSB) | typ 7.8125 m°C | 7 | |
| Repeatability(1) | V+ = 3.3 V; 8 averages; 1-Hz conversion cycle; typical is ± | typ 1 LSB | 7 |
| Long-term stability and drift | 1000 hours at 150°C; typical is ± | typ 0.03 °C | 7 |
| Temperature cycling and hysteresis(3) | 8 Averages; typical is ± | typ 2 LSB | 7 |
| Conversion time | No internal averages | min 13 · typ 15.5 · max 17.5 ms | 7 |
| Input capacitance | typ 4 pF | 7 | |
| Input leakage current IIN | min -0.1 · max 0.1 uA | 7 | |
| SDA and ALERT output logic low level VOL | IOL = –3mA | max 0.4 V | 7 |
| Quiescent current during active conversion IQ_ACTIVE | Active Conversion, serial bus inactive | typ 135 · max 220 uA | 8 |
| Quiescent current IQ | Duty cycle 1Hz, averaging mode off, serial bus inactive. TA = 25°C | typ 3.5 · max 5 uA | 8 |
| Quiescent current IQ | Duty cycle 1Hz, 8 averaging mode on, serial bus inactive. TA = 25°C | typ 16 · max 22 uA | 8 |
| Quiescent current IQ | Duty cycle 1Hz, averaging mode off, serial bus active, SCL frequency = 400kHz | typ 15 uA | 8 |
| Standby current(4) ISB | Serial bus inactive. SCL, SDA, and ADD0 = V+. TA = 25°C | typ 1.25 · max 2 uA | 8 |
| Shutdown current ISD | Serial bus inactive, SCL, SDA, and ADD0 = V+. TA = 25°C | typ 0.15 · max 0.35 uA | 8 |
| Shutdown current ISD | Serial bus inactive, SCL, SDA and ADD0 = V+, TA = 150°C | max 5 uA | 8 |
| Shutdown current ISD | Serial bus active, SCL frequency = 400kHz, ADD0 = V+ | typ 17 uA | 8 |
| EEPROM write quiescent current IEE | ADC conversion off; serial bus inactive | typ 240 uA | 8 |
| Power-on-reset threshold voltage VPOR | Supply rising | typ 1.6 V | 8 |
| Brownout detect | Supply falling | typ 1.1 V | 8 |
| Reset Time tRESET | Time required by device to reset | typ 1.5 ms | 8 |
| Programming time | EEPROM | typ 7 ms | 8 |
| Number of writes | EEPROM | min 1000 · typ 50000 Times | 8 |
| Data retention time | EEPROM | min 10 · typ 100 Years | 8 |
| SCL operating frequency fSCL | STANDARD | min 1 KHz | 8 |
| SCL operating frequency fSCL | FAST-MODE | min 1 · max 400 KHz | 8 |
| Bus free time between STOP and START conditions tBUF | FAST-MODE | min 1300 ns | 8 |
| Hold time after repeated START condition. After this period, the first clock is generated(1) tHD;STA | STANDARD | min 5 ns | 8 |
| Hold time after repeated START condition. After this period, the first clock is generated(1) tHD;STA | FAST-MODE | min 600 ns | 8 |
| Repeated START condition setup time tSU;STA | FAST-MODE | min 600 ns | 8 |
Pins, by the datasheet
6- C1 ADD0
- Address select. Connect to GND, V+, SDA, or SCL. · p. 5
- C2 ALERT
- Overtemperature alert or data-ready signal; requires a pullup resistor if used. · p. 5
- B2 GND
- Ground · p. 5
- A2 SCL
- Serial clock · p. 5
- A1 SDA
- Serial data input and open-drain output. Requires a pullup resistor. · p. 5
- B1 V+
- Supply voltage · p. 5
- 4 layers150 × 50 mm

- 2 layers175.7 × 19 mm

Tmp119 stick
marcoreps/tmp119_thermometer
A high precision temperature sensor attached to a microcontroller
10 parts6 - 4 layers65.5 × 42.2 mm

USB thumb drive
Arhamee/hardware-portfolio
Multi-layer PCB designs in KiCad 10 schematic capture to fabrication-ready Gerbers. High-speed routing, BGA escape, power electronics.
126 partsMIT - 4 layers63.7 × 41.1 mm

KiCad Advanced Design a smart USB thumb drive
gorkemguven/RP2040-Dual-TypeC-eMMC-Board
A 4-layer embedded development board featuring RP2040, USB2244 high-speed eMMC bridge, dual Type-C ports, and INA226/TMP119 power & telemetry monitoring.
133 partsMIT - 2 layers65 × 56 mm

Canary
michael-michelotti/canary
Raspberry Pi air quality HAT with a custom Linux IIO kernel driver for the Sensirion SGP40.
26 parts - 4 layers64.8 × 40.9 mm

High Speed USB 2.0 Storage Device PCB Board
pinanshu123/High-Speed-USB-2.0-Storage-Device-PCB
125 parts - 2 layers53.3 × 53 mm

- 2 layers18 × 9 mm

Parts like it
3TMP117AIYBGR
DSBGA-6-55℃~+150℃ 1.8V~5.5V 15.5ms 16bit 3.1uA I2C、SMBus ±0.1℃ DSBGA-6 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsTMP108AIYFF
DSBGA-6-40℃~+125℃ 1.4V~3.6V 12bit 27ms 6uA SMBus Temperature threshold monitoring、Low-power standby ±0.75℃ DSBGA-6 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsTMP117AIYBGT
DSBGA-6-55℃~+150℃ 1.8V~5.5V 15.5ms 16bit 3.1uA I2C、SMBus ±0.1℃ DSBGA-6 Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
Questions
Is there a KiCad symbol and footprint for the TMP119AIYBGR?
Yes. The symbol is Sensor_Temperature:TMP119AIYBGR and the footprint Package_BGA:Texas_DSBGA-6_0.95x1.488mm_Layout2x3_P0.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TMP119AIYBGR?
DSBGA-6, with 6 pins. Its footprint is drawn on this page.
Where is the TMP119AIYBGR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TMP119AIYBGR?
JLCPCB lists it as part C22428347, with 4,944 in stock; the sellers' links on this page open their listings.
What can replace the TMP119AIYBGR?
Parts like it in the library: the TMP117AIYBGR by Texas Instruments, the TMP108AIYFF by Texas Instruments and the TMP117AIYBGT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TMP119AIYBGR?
11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.