Skip to the content
123

TLV803SDBZR

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.1V~6V 2.93V 200ms 9uA Active Low No No Open Drain Voltage Monitor SOT-23 Supervisor and Reset ICs ROHS

Part id
ti/TLV803SDBZR
Category
Supervisor And Reset ICs
Package
SOT-23
Pins
3
In stock
36,511 at JLCPCB (C132016)
Used on
5 open-source boards

Overview

The TLV803SDBZR is a supervisor And Reset IC made by Texas Instruments in a SOT-23 package with 3 pins. -40℃~+125℃@(Tj) 1 1.1V~6V 2.93V 200ms 9uA Active Low No No Open Drain Voltage Monitor SOT-23 Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TCM809ZVNB713, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 36,511 are in stock at JLCPCB (part C132016). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1GND2RESET#3VDD
EasyEDA_Cloud:TCM809ZVNB713From EasyEDA

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

10
Supply, least
1.1 V · VDD, recommended operating min · p. 5
Supply, most
6 V · VDD, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VDD, absolute max · p. 5
Junction, hottest
125 °C · Operating junction temperature max · p. 5
Takes working
9 µA · VDD = 2 V, output unconnected, typical · p. 6
Takes at most
30 µA · VDD = 6 V, output unconnected, max · p. 6
A pin gives at most
5 mA · RESET low output current, absolute max · p. 5
Junction to air (DBZ (SOT-23))
328.5 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (DBZ (SOT-23))
58.3 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (DBZ (SOT-23))
135.4 K/W · Junction-to-case (top) thermal resistance · p. 5

What it is and has

5
Package
3-Pin SOT23 · p. 1
Reset output
Active-low, open-drain · p. 1
Reset delay
200 ms fixed · p. 1
Threshold voltage
2.93 V · p. 4
Transient rejection
Built-in rejection of fast transients on VDD · p. 8

Around it

2
cap 0.1 µF
between VDD and GND; Ceramic bypass capacitor near the supply terminals for threshold stability. · p. 6
res 10-kΩ to 1-MΩ
between RESET and VDD; Pullup resistor; RESET may also be pulled to a voltage above VDD. · p. 4

Specifications

28
ParameterConditionsAs printedPage
Voltage VDDOver operating junction temperature range; with respect to GNDmin 0 · max 6.5 V5
VoltageAll other pins; with respect to GNDmin -0.3 · max 6.5 V5
Maximum low output current IOLOver operating junction temperature rangemax 5 mA5
Maximum high output current IOHOver operating junction temperature rangemax -5 mA5
Input clamp current IIKVI < 0 or VI > VDD; ± limitmax 20 mA5
Output clamp current IOKVO < 0 or VO > VDD; ± limitmax 20 mA5
Operating junction temperature range TJmin -40 · max 125 °C5
Storage temperature range Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± ratingmax 2000 V5
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ± ratingmax 500 V5
Junction-to-ambient thermal resistance RθJATLV8x3, DBZ (SOT-23), 3 pinstyp 328.5 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)TLV8x3, DBZ (SOT-23), 3 pinstyp 135.4 °C/W5
Junction-to-board thermal resistance RθJBTLV8x3, DBZ (SOT-23), 3 pinstyp 58.3 °C/W5
Junction-to-top characterization parameter ψJTTLV8x3, DBZ (SOT-23), 3 pinstyp 5.2 °C/W5
Junction-to-board characterization parameter ψJBTLV8x3, DBZ (SOT-23), 3 pinstyp 59.6 °C/W5
Supply voltage VDDAt specified temperature rangemin 1.1 · max 6 V5
Operating junction temperature TJmin -40 · max 125 °C5
Low-level output voltage VOLVDD = 2 V to 6 V, IOL = 500 uAmax 0.3 V6
Low-level output voltage VOLVDD = 3.3 V, IOL = 2 mAmax 0.4 V6
Low-level output voltage VOLVDD = 6 V, IOL = 4 mAmax 0.4 V6
Power-up reset voltageIOL = 50 uA, VOL < 0.2 Vmin 1.1 V6
Negative-going input threshold voltage VIT–TLV803S; TJ = – 40°C to +125°Cmin 2.87 · typ 2.93 · max 2.99 V6
Hysteresis VhysTLV803S; TJ = 25°C, IOL = 50 uAtyp 40 mV6
Supply current IDDVDD = 2 V, output unconnectedtyp 9 · max 15 uA6
Supply current IDDVDD = 6 V, output unconnectedtyp 20 · max 30 uA6
Output leakage current IOHVDD = 6 Vmax 350 nA6
Pulse duration at VDD twVDD = 1.08 VIT– to 0.92 VIT–typ 10 us6
Delay time tdVDD ≥ VIT– + 0.2 V; see Timing Diagrammin 120 · typ 200 · max 280 ms6

Pins, by the datasheet

3
1 GND
Ground pin. · p. 4
2 RESET
Active-low open-drain reset output; remains asserted for td after VDD exceeds VIT–. Use a 10-kΩ to 1-MΩ pullup resistor; the pullup voltage is not limited by VDD. · p. 4
3 VDD
Supply voltage pin; place a 0.1-uF ceramic capacitor close to this pin. · p. 4

Open-source boards using it

5
  • 4 layers79.5 × 20 mmMatter usb switch, the printed circuit board in 3D

    Matter usb switch

    IvanVeloz/smart-usb-plug

    A smart plug for USB with energy measurement and Matter over Thread support

    65 parts2GPL-3.0
  • 2 layers100 × 100 mmColorFaceBoard, the printed circuit board in 3D

    ColorFaceBoard

    y-suyama/ColorFaceBoard

    145 parts
  • 6 layers100 × 100 mmFlexLogic EVB, the printed circuit board in 3D

    FlexLogic EVB

    y-suyama/FlexLogic_EVB

    311 partsApache-2.0
  • 8 layers50 × 50 mmFlexLogicMini EVB, the printed circuit board in 3D

    FlexLogicMini EVB

    y-suyama/FlexLogicMini_EVB

    180 partsBSD-3-Clause
  • 8 layers50 × 50 mmFT2232H EVB, the printed circuit board in 3D

    FT2232H EVB

    y-suyama/FT2232H_EVB

    212 partsBSD-3-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV803SDBZR?

Yes. The symbol is EasyEDA_Cloud:TCM809ZVNB713 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV803SDBZR?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the TLV803SDBZR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV803SDBZR?

JLCPCB lists it as part C132016, with 36,511 in stock; the sellers' links on this page open their listings.

What can replace the TLV803SDBZR?

Parts like it in the library: the MAX809S by UMW, the TPAX809RS3 by TECH PUBLIC, the ME2805A263XG by MICRONE and the MAX809R by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV803SDBZR?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.