TLV75901PDRV
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 1A 225mV@(1A) 35uA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Enable、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TLV75901PDRV
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- WSON-6-EP(2x2)
- Pins
- 7
- In stock
- 16,120 at JLCPCB (C544759)
Overview
The TLV75901PDRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 1A 225mV@(1A) 35uA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Enable、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLV75901PDRVR, from EasyEDA) and its footprint (EasyEDA_Cloud:WSON-6_L2.0-W2.0-P0.65-TL-EP, from EasyEDA), ready for a KiCad board. 16,120 are in stock at JLCPCB (part C544759).
Symbol
Footprint
From the datasheet
23- Supply, least
- 1.5 V · IN, recommended operating minimum · p. 4
- Supply, most
- 6 V · IN, recommended operating maximum · p. 4
- Supply, absolute maximum
- 6.5 V · IN, absolute maximum · p. 3
- Junction, hottest
- 150 °C · junction temperature, absolute maximum · p. 3
- Takes working
- 25 µA · ground current, typical, IOUT = 0 mA, TJ = 25°C · p. 4
- Takes asleep
- 100 nA · shutdown current, typical, VEN ≤ 0.3 V · p. 4
- Gives
- 1 A · output current, recommended maximum · p. 4
- Current limit
- 1.44 A · output current limit, typical, VIN = VOUT(NOM) + 1.0 V · p. 5
- Feedback reference
- 550 mV · feedback voltage, typical, TJ = 25°C · p. 4
- Dropout
- 896 mV · typical at 1 A, 0.65 V ≤ VOUT < 0.8 V · p. 5
- Dropout
- 765 mV · typical at 1 A, 0.8 V ≤ VOUT < 0.9 V · p. 5
- Dropout
- 700 mV · typical at 1 A, 0.9 V ≤ VOUT < 1.0 V · p. 5
- Dropout
- 600 mV · typical at 1 A, 1.0 V ≤ VOUT < 1.2 V · p. 5
- Dropout
- 464 mV · typical at 1 A, 1.2 V ≤ VOUT < 1.5 V · p. 5
- Dropout
- 332 mV · typical at 1 A, 1.5 V ≤ VOUT < 1.8 V · p. 5
- Dropout
- 264 mV · typical at 1 A, 1.8 V ≤ VOUT < 2.5 V · p. 5
- Dropout
- 193 mV · typical at 1 A, 2.5 V ≤ VOUT < 3.3 V · p. 5
- Dropout
- 161 mV · typical at 1 A, 3.3 V ≤ VOUT ≤ 5.5 V · p. 5
- Junction to air (DRV (WSON))
- 80.3 K/W · junction-to-ambient thermal resistance · p. 4
- Junction to board (DRV (WSON))
- 44.8 K/W · junction-to-board thermal resistance · p. 4
- Junction to case (DRV (WSON))
- 98.7 K/W · junction-to-case (top) thermal resistance · p. 4
- Dropout
- 225 mV · max at 1 A, 3.3 V output · p. 1
- Junction, hottest
- 125 °C · max junction temperature for reliable operation · p. 14
What it is and has
6- Input voltage range
- 1.5 V to 6.0 V · p. 1
- Adjustable output voltage
- 0.55 V to 5.5 V · p. 1
- Soft-start
- Built-in, monotonic VOUT rise · p. 1
- Package
- 2-mm × 2-mm 6-Pin WSON (DRV) · p. 1
- Output discharge
- Active · p. 1
- Protection
- foldback current limit, shutdown, thermal protection · p. 13
Around it
4- cap 1 μF
- between IN and GND; Recommended minimum input capacitance; ceramic capacitor recommended by the pin description. · p. 4
- cap 1 μF to 220 μF
- between OUT and GND; Required for stability; place close to the output. Minimum derated capacitance is 0.47 uF. · p. 4
- cap 0.47 μF or larger
- between OUT and GND; Required for stability; use X5R or X7R ceramic capacitors. Maximum recommended output capacitance is 220 uF. · p. 16
- cap 2.2 µF
- between IN and GND; Selected input capacitance in the typical application. · p. 20
Specifications
57| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VIN | Over operating free-air temperature range | min -0.3 · max 6.5 V | 3 |
| Enable voltage VEN | Over operating free-air temperature range | min -0.3 · max 6.5 V | 3 |
| Output voltage VOUT | Maximum is VIN + 0.3 V or 6.0 V, whichever is smaller | min -0.3 V | 3 |
| Operating junction temperature TJ | min -40 · max 150 °C | 3 | |
| Storage temperature Tstg | min -65 · max 150 °C | 3 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | min -2000 · max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101 | min -500 · max 500 V | 4 |
| Input voltage VIN | min 1.5 · max 6 V | 4 | |
| Output voltage VOUT | min 0.55 · max 5.5 V | 4 | |
| Output current IOUT | min 0 · max 1 A | 4 | |
| Input capacitor CIN | min 1 uF | 4 | |
| Output capacitor COUT | Minimum derated capacitance of 0.47 uF required for stability | min 1 · max 220 uF | 4 |
| Enable voltage VEN | min 0 · max 6 V | 4 | |
| Enable toggle frequency fEN | max 10 kHz | 4 | |
| Junction temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DRV (WSON), 6 pins | typ 80.3 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | DRV (WSON), 6 pins | typ 98.7 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | DRV (WSON), 6 pins | typ 44.8 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | DRV (WSON), 6 pins | typ 6.1 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | DRV (WSON), 6 pins | typ 45 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | DRV (WSON), 6 pins | typ 20.8 °C/W | 4 |
| Feedback voltage VFB | TJ = 25°C | typ 0.55 V | 4 |
| Output accuracy | TJ = 25°C; external feedback resistor tolerances not included | min -0.7 · max 0.7 % | 4 |
| Output accuracy | –40°C ≤ TJ ≤ +85°C; external feedback resistor tolerances not included | min -1 · max 1 % | 4 |
| Output accuracy | –40°C ≤ TJ ≤ +125°C; external feedback resistor tolerances not included | min -1.5 · max 1.5 % | 4 |
| Line regulation | VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V; VIN = 1.5 V for VOUT < 1.0 V | typ 2 · max 7.5 mV | 4 |
| Load regulation | 0.1 mA ≤ IOUT ≤ 1 A, VIN ≥ 2.0 V | typ 0.03 V/A | 4 |
| Ground current IGND | IOUT = 0 mA, TJ = 25°C | min 10 · typ 25 · max 31 uA | 4 |
| Ground current IGND | IOUT = 0 mA, –40°C ≤ TJ ≤ +125°C | max 35 uA | 4 |
| Shutdown current ISHDN | VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V | typ 0.1 · max 1 uA | 4 |
| Feedback pin current IFB | typ 0.01 · max 0.1 uA | 5 | |
| Output current limit ICL | VIN = VOUT(NOM) + 1.0 V; VOUT = VOUT(NOM) - 0.2 V, VOUT < 1.5 V | min 1.22 · typ 1.44 · max 1.83 A | 5 |
| Output current limit ICL | VIN = VOUT(NOM) + 1.0 V; VOUT = 0.9 x VOUT(NOM), VOUT ≥ 1.5 V | min 1.22 · typ 1.44 · max 1.83 A | 5 |
| Short-circuit current limit ISC | VIN = VOUT(NOM) + 1.0 V, VOUT = 0 V | typ 770 mA | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 0.65 V ≤ VOUT < 0.8 V | typ 896 · max 1050 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 0.8 V ≤ VOUT < 0.9 V | typ 765 · max 920 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 0.9 V ≤ VOUT < 1.0 V | typ 700 · max 850 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.0 V ≤ VOUT < 1.2 V | typ 600 · max 750 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.2 V ≤ VOUT < 1.5 V | typ 464 · max 585 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.5 V ≤ VOUT < 1.8 V | typ 332 · max 440 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 1.8 V ≤ VOUT < 2.5 V | typ 264 · max 360 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 2.5 V ≤ VOUT < 3.3 V | typ 193 · max 270 mV | 5 |
| Dropout voltage VDO | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM); 3.3 V ≤ VOUT ≤ 5.5 V | typ 161 · max 225 mV | 5 |
| Power-supply rejection ratio PSRR | VIN = VOUT(NOM) + 1 V, IOUT = 50 mA, f = 1 kHz | typ 50 dB | 5 |
| Power-supply rejection ratio PSRR | VIN = VOUT(NOM) + 1 V, IOUT = 50 mA, f = 100 kHz | typ 45 dB | 5 |
| Power-supply rejection ratio PSRR | VIN = VOUT(NOM) + 1 V, IOUT = 50 mA, f = 1 MHz | typ 30 dB | 5 |
| Output noise voltage Vn | BW = 10 Hz to 100 kHz, VOUT = 0.9 V | typ 53 uVRMS | 5 |
| Undervoltage lockout VUVLO | VIN rising | min 1.21 · typ 1.33 · max 1.47 V | 5 |
| Undervoltage lockout VUVLO | VIN falling | min 1.17 · typ 1.29 · max 1.42 V | 5 |
| Undervoltage lockout hysteresis VUVLO, HYST | VIN hysteresis | typ 40 mV | 5 |
| Startup time tSTR | From EN low-to-high transition to VOUT = VOUT(NOM) x 95% | typ 500 us | 5 |
| EN pin high voltage VEN(HI) | min 1 V | 5 | |
| EN pin low voltage VEN(LO) | max 0.3 V | 5 | |
| Enable pin current IEN | VIN = VEN = 6.0 V | typ 10 nA | 5 |
| Pulldown resistance RPULLDOWN | VIN = 6.0 V | typ 95 Ω | 5 |
| Thermal shutdown TSD | Shutdown, temperature increasing | typ 170 °C | 5 |
| Thermal shutdown TSD | Reset, temperature decreasing | typ 155 °C | 5 |
Pins, by the datasheet
7- 1 OUT
- Regulated output; requires a capacitor to ground for stability, placed as close to the output as possible. · p. 3
- 2 FB
- Input to the control loop error amplifier used to set the output voltage. · p. 3
- 3 GND
- Ground pin. · p. 3
- 4 EN
- Drive above VEN(HI) to enable the regulator or below VEN(LO) for shutdown. · p. 3
- 5 DNC
- Do not connect. · p. 3
- 6 IN
- Input supply; connect the recommended value or larger ceramic capacitor from IN to ground for transient response and low input impedance. · p. 3
- Pad Thermal pad
- Connect to a large area GND plane for improved thermal performance. · p. 3
Ordering codes, by the datasheet
6- TLV75901PDRVR
- WSON (DRV) · 6 pins; 3000 units, LARGE T&R · p. 24
- TLV75901PDRVR.A
- WSON (DRV) · 6 pins; 3000 units, LARGE T&R · p. 24
- TLV75901PDRVRG4
- WSON (DRV) · 6 pins; 3000 units, LARGE T&R · p. 24
- TLV75901PDRVRG4.A
- WSON (DRV) · 6 pins; 3000 units, LARGE T&R · p. 24
- TLV75901PDRVT
- WSON (DRV) · 6 pins; 250 units, SMALL T&R · p. 24
- TLV75901PDRVT.A
- WSON (DRV) · 6 pins; 250 units, SMALL T&R · p. 24
Parts like it
8TPS7A3701DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1.2V 1A 200mV@(1A) 32.4uVrms 400uA 5.5V 58dB@(100Hz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74633PCQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 1A 25uA 265mV@(1A) 3.3V 38dB@(100kHz) 53uVrms 6V Fixed PG Pin、Over Current Protection、Over Temperature Protection Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS73733DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1A 3.3V 5.5V 500mV@(1A) 58dB@(100Hz) 89.1uVrms Fixed Over Current Protection、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74601PBDRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1A 225mV@(1A) 25uA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、PG Pin、Over Current Protection、Over Temperature Protection、Soft Start、Enable、Short Circuit Protection WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS73701DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1.2V~5.5V 1A 5.5V 500mV@(1A) 58dB@(100Hz) Adjustable Over Current Protection、Over Temperature Protection、Enable Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74601PCQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 1.09V@(1A) 1A 25uA 38dB@(100kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、PG Pin、Over Current Protection、Over Temperature Protection WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS74601PQWDRVRQ1
WSON-6-EP(2x2)-40℃~+150℃@(Tj) 1 1A 25uA 38dB@(100kHz) 53uVrms 550mV~5.5V 6V 895mV@(1A) Adjustable Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Short Circuit Protection WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS7A3725DRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1.3mA 1A 2.5V 200mV@(1A) 5.5V 58dB@(100Hz) 67.5uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TLV75901PDRV?
Yes. The symbol is EasyEDA_Cloud:TLV75901PDRVR and the footprint EasyEDA_Cloud:WSON-6_L2.0-W2.0-P0.65-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TLV75901PDRV?
WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.
Where is the TLV75901PDRV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TLV75901PDRV?
JLCPCB lists it as part C544759, with 16,120 in stock; the sellers' links on this page open their listings.
What can replace the TLV75901PDRV?
Parts like it in the library: the TPS7A3701DRV by Texas Instruments, the TPS74633PCQWDRVRQ1 by Texas Instruments, the TPS73733DRV by Texas Instruments and the TPS74601PBDRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.