Skip to the content
12345

TLV70033DCK

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 200mA 250mV@(200mA) 3.3V 31uA 48uVrms 5.5V 68dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV70033DCK
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SC-70-5
Pins
5
In stock
28,221 at JLCPCB (C47945)
Used on
13 open-source boards

Overview

The TLV70033DCK is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃@(Tj) 1 200mA 250mV@(200mA) 3.3V 31uA 48uVrms 5.5V 68dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 28,221 are in stock at JLCPCB (part C47945). 13 open-source boards in 12 repositories on GitHub use it.

Symbol

1IN3EN5OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:SOT-353_SC-70-5From KiCad's library

From the datasheet

12
Supply, least
2 V · IN, recommended operating min · p. 5
Supply, most
5.5 V · IN, recommended operating max · p. 5
Supply, absolute maximum
6 V · IN, absolute max · p. 5
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 5
Takes working
31 µA · Ground pin current typical, IOUT = 0 mA · p. 6
Takes asleep
400 nA · Shutdown ground current typical, VEN ≤ 0.4 V, VIN = 2 V · p. 6
Takes asleep
1 µA · Shutdown ground current typical, VEN ≤ 0.4 V, VIN = 2 V to 4.5 V · p. 6
Gives
200 mA · Recommended output current max · p. 5
Current limit
220 mA · Output current limit min, VOUT = 0.9 × VOUT(nom) · p. 6
Junction to air (DCK [SC70])
307.6 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (DCK [SC70])
79.1 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (DCK [SC70])
93.7 K/W · Junction-to-board thermal resistance · p. 5

What it is and has

3
Accuracy
2% · p. 1
Protection
Thermal shutdown and overcurrent protection · p. 1
Output capacitance
Stable with effective capacitance of 0.1 μF · p. 1

Around it

1
cap 1-μF
between IN and GND; Recommended ceramic input capacitor; X5R or X7R type. · p. 13

Specifications

32
ParameterConditionsAs printedPage
Voltage VINOver operating junction temperature rangemin -0.3 · max 6 V5
Voltage VENMaximum is VIN + 0.3 V or 6 V, whichever is lessmin -0.3 · max 6 V5
Voltage VOUTOver operating junction temperature rangemin -0.3 · max 6 V5
Operating junction, TJ TJmin -55 · max 150 °C5
Storage, Tstg Tstgmin -55 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmin -500 · max 500 V5
VIN VINOver operating free-air temperature rangemin 2 · max 5.5 V5
VOUT VOUTOver operating free-air temperature range; family output rangemin 1.2 · max 4.8 V5
IOUT IOUTOver operating free-air temperature rangemin 0 · max 200 mA5
Junction-to-ambient thermal resistance RθJADCK [SC70], 5 PINStyp 307.6 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DCK [SC70], 5 PINStyp 79.1 °C/W5
Junction-to-board thermal resistance RθJBDCK [SC70], 5 PINStyp 93.7 °C/W5
Junction-to-top characterization parameter ψJTDCK [SC70], 5 PINStyp 1.3 °C/W5
Junction-to-board characterization parameter ψJBDCK [SC70], 5 PINStyp 92.8 °C/W5
Input voltage range VINmin 2 · max 5.5 V6
DC output accuracy VOUT–40°C ≤ TJ ≤ +125°Cmin -2 · max 2 %6
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mAtyp 1 · max 5 mV6
Load regulation ΔVOUT(ΔIOUT)0 mA ≤ IOUT ≤ 200 mAtyp 1 · max 15 mV6
Output current limit ICLVOUT = 0.9 × VOUT(nom)min 220 · max 860 mA6
Ground pin current IGNDIOUT = 0 mAtyp 31 · max 55 uA6
Ground pin current IGNDIOUT = 200 mA, VIN = VOUT + 0.5 Vtyp 270 uA6
Ground pin current (shutdown) ISHDNVEN ≤ 0.4 V, VIN = 2 Vtyp 400 nA6
Ground pin current (shutdown) ISHDNVEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 Vtyp 1 · max 2 uA6
Start-up time tSTRCOUT = 1 uF, IOUT = 200 mA; time from EN assertion to 0.98 × VOUT(nom)typ 100 us6
Enable pin high (enabled) VEN(high)Maximum is VINmin 0.9 V6
Enable pin low (disabled) VEN(low)min 0 · max 0.4 V6
Enable pin current IENVIN = VEN = 5.5 Vtyp 0.04 · max 0.5 uA6
Undervoltage lockout UVLOVIN risingtyp 1.9 V6
Thermal shutdown temperature TsdShutdown, temperature increasingtyp 160 °C6
Thermal shutdown temperature TsdReset, temperature decreasingtyp 140 °C6
Operating junction temperature TJmin -40 · max 125 °C6

Pins, by the datasheet

5
1 IN
Input pin; a 1-uF ceramic capacitor to ground is recommended for stability and transient performance. · p. 4
2 GND
Ground pin. · p. 4
3 EN
Enable pin; above 0.9 V enables the regulator, below 0.4 V puts it into shutdown. · p. 4
4 NC
No connection; can be tied to ground to improve thermal dissipation. · p. 4
5 OUT
Regulated output voltage; a 1-uF ceramic capacitor to ground is needed for stability. · p. 4

Open-source boards using it

13See all 13
  • 4 layers124.6 × 68.7 mmOssc board, the printed circuit board in 3D

    Ossc board

    marqs85/ossc_pcb

    ossc pcb design files

    265 parts163
  • 2 layers33 × 15 mmMmcblkNX, the printed circuit board in 3D

    MmcblkNX

    ignasurba/mmcblkNX

    Hardware eMMC reader capable of reading Nintendo Switch boot0, boot1 and rawnand

    16 parts119MIT
  • 4 layers82.3 × 71.9 mmIsl board, the printed circuit board in 3D

    Isl board

    marqs85/DExx-vd_isl

    Advanced video digitizer add-on module for Terasic DE series FPGA development boards.

    121 parts33GPL-3.0
  • 2 layers285 × 94.6 mmKeyboard, the printed circuit board in 3D

    Keyboard

    andrewcchen/blu60

    259 parts20
  • 2 layers41 × 35 mmAlexa power button, the printed circuit board in 3D

    Alexa power button

    Jeija/alexa-power-button

    Use an Amazon Dash Button or an Alexa Voice Command instead of your computer's power button

    28 parts6
  • 4 layers22.6 × 20 mm6s4in1, the printed circuit board in 3D

    6s4in1

    lucascheuer/6s4in1_4layer

    This version has moved to 4 layers to increase the current capability from the original version

    154 parts4GPL-3.0
  • 2 layers66.9 × 41.5 mmEEG v2.kicad Auto pcb, the printed circuit board in 3D

    EEG v2.kicad Auto pcb

    aaronadamski/brainsolutions-eegboard

    EEG Prototype Board for UCI Senior Design

    115 parts
  • 2 layers82.6 × 45.7 mmUsbmodulestick, the printed circuit board in 3D

    Usbmodulestick

    superna9999/usbmodulestick

    8 partsApache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV70033DCK?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV70033DCK?

SC-70-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV70033DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV70033DCK?

JLCPCB lists it as part C47945, with 28,221 in stock; the sellers' links on this page open their listings.

What can replace the TLV70033DCK?

Parts like it in the library: the ME6211C33R5G by MICRONE, the LR9102G-33-AL5-R by UTC, the SGM2019-3.3YC5G/TR by SG Micro and the SGM2036-3.3YC5G/TR by SG Micro. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV70033DCK?

13 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.