Skip to the content
12345678

TLIN1027DRQ1

Texas InstrumentsExtended

-40℃~+125℃ 1 1 12uA 20Kbps 4V~36V 5mA Thermal shutdown protection、Bus fault protection、Local wake-up、Bus wake-up、Low-power mode、Under-voltage detection Transceiver ±8kV SOIC-8 LIN Transceivers ROHS

Part id
ti/TLIN1027DRQ1
Category
LIN Transceivers
Package
SOIC-8
Pins
8
In stock
188 at JLCPCB (C2870086)
Used on
4 open-source boards

Overview

The TLIN1027DRQ1 is a LIN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 1 12uA 20Kbps 4V~36V 5mA Thermal shutdown protection、Bus fault protection、Local wake-up、Bus wake-up、Low-power mode、Under-voltage detection Transceiver ±8kV SOIC-8 LIN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLIN1039DDFRQ1, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 188 are in stock at JLCPCB (part C2870086). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1RXD2EN3NC4TXD5GND6LIN7VSUP8NC
EasyEDA_Cloud:TLIN1039DDFRQ1From EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the TLIN1027DRQ1
PinNameType
1RXDUnspecified
2ENUnspecified
3NCUnspecified
4TXDUnspecified
5GNDUnspecified
6LINUnspecified
7VSUPUnspecified
8NCUnspecified

Open-source boards using it

4
  • 2 layers170.6 × 121.1 mmEIM, the printed circuit board in 3D

    EIM

    bhorst519/bluecar

    232 parts3
  • 4 layers68 × 100 mmGrippyboi, the printed circuit board in 3D

    Grippyboi

    gabbla/grippyboi

    Haldex Gen 1 controller

    204 parts
  • 4 layers65 × 56 mmCanary hat, the printed circuit board in 3D

    Canary hat

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    66 parts
  • 4 layers87 × 56 mmCanary hat, the printed circuit board in 3D

    Canary hat

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    104 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLIN1027DRQ1?

Yes. The symbol is EasyEDA_Cloud:TLIN1039DDFRQ1 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLIN1027DRQ1?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TLIN1027DRQ1 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLIN1027DRQ1?

JLCPCB lists it as part C2870086, with 188 in stock; the sellers' links on this page open their listings.

What can replace the TLIN1027DRQ1?

Parts like it in the library: the TJA1021T/20/CM by NXP Semiconductors, the TJA1027T/20/1J by NXP Semiconductors, the TJA1020T/CM by NXP Semiconductors and the TJA1028T/5V0/20/1J by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLIN1027DRQ1?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.