2 layers114.1 × 148.7 mm

Ohren
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
35 parts1
Texas Instruments
The TLC5955RTQ is an uncategorised made by Texas Instruments with 57 pins.
PCBKit's library has its KiCad symbol (Celestial_Driver_LED:TI TLC5955RTQ, from Altium's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
The library has no footprint for this part yet.
| Pin | Name | Type |
|---|---|---|
| 1 | OUTB3 | Passive |
| 2 | OUTR3 | Passive |
| 3 | OUTG3 | Passive |
| 4 | OUTB7 | Passive |
| 5 | OUTR7 | Passive |
| 6 | OUTG7 | Passive |
| 7 | SOUT | Passive |
| 8 | GND | Passive |
| 9 | OUTG11 | Passive |
| 10 | OUTR11 | Passive |
| 11 | OUTB11 | Passive |
| 12 | OUTG15 | Passive |
| 13 | OUTR15 | Passive |
| 14 | OUTB15 | Passive |
| 15 | OUTG10 | Passive |
| 16 | OUTR10 | Passive |
| 17 | OUTB10 | Passive |
| 18 | OUTG14 | Passive |
| 19 | OUTR14 | Passive |
| 20 | OUTB14 | Passive |
| 21 | OUTG13 | Passive |
| 22 | OUTR13 | Passive |
| 23 | OUTB13 | Passive |
| 24 | OUTG9 | Passive |
| 25 | OUTR9 | Passive |
| 26 | OUTB9 | Passive |
| 27 | OUTG12 | Passive |
| 28 | OUTR12 | Passive |
| 29 | OUTB12 | Passive |
| 30 | OUTG8 | Passive |
| 31 | OUTR8 | Passive |
| 32 | OUTB8 | Passive |
| 33 | VCC | Passive |
| 34 | GSCLK | Passive |
| 35 | GND | Passive |
| 36 | SIN | Passive |
| 37 | SCLK | Passive |
| 38 | LAT | Passive |
| 39 | OUTB4 | Passive |
| 40 | OUTR4 | Passive |
| 41 | OUTG4 | Passive |
| 42 | OUTB0 | Passive |
| 43 | OUTR0 | Passive |
| 44 | OUTG0 | Passive |
| 45 | OUTB5 | Passive |
| 46 | OUTR5 | Passive |
| 47 | OUTG5 | Passive |
| 48 | OUTB1 | Passive |
| 49 | OUTR1 | Passive |
| 50 | OUTG1 | Passive |
| 51 | OUTB2 | Passive |
| 52 | OUTR2 | Passive |
| 53 | OUTG2 | Passive |
| 54 | OUTB6 | Passive |
| 55 | OUTR6 | Passive |
| 56 | OUTG6 | Passive |
| 57 | PAD | Passive |

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
Yes. The symbol is Celestial_Driver_LED:TI TLC5955RTQ, both drawn on this page. PCBKit places them on a board for you when you design with it.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.