Skip to the content
1234567891011121314151617181920212223242526272829

TLC5940PWP

Texas InstrumentsExtended

-40℃~+85℃ 120mA 16 30MHz 3V~5.5V 8% Over-Temperature Protection (OTP)、LED open-circuit protection PWM HTSSOP-28-EP LED Drivers ROHS

Part id
ti/TLC5940PWP
Category
LED Drivers
Package
HTSSOP-28-EP
Pins
29
In stock
0 at JLCPCB (C1554243)
Used on
24 open-source boards

Overview

The TLC5940PWP is a LED Driver made by Texas Instruments in a HTSSOP-28-EP package with 29 pins. -40℃~+85℃ 120mA 16 30MHz 3V~5.5V 8% Over-Temperature Protection (OTP)、LED open-circuit protection PWM HTSSOP-28-EP LED Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_LED:TLC5940PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1554243). 24 open-source boards in 22 repositories on GitHub use it.

Symbol

1GND2BLANK3XLAT4SCLK5SIN6VPRG7OUT08OUT19OUT210OUT311OUT412OUT513OUT614OUT715OUT816OUT917OUT1018OUT1119OUT1220OUT1321OUT1422OUT1523XERR24SOUT25GSCLK26DCPRG27IREF28VCC29PAD
Driver_LED:TLC5940PWPFrom KiCad's library

Footprint

1234567891011121314151617181920212223242526272829
Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mmFrom KiCad's library

From the datasheet

13
Supply, least
3 V · VCC, recommended operating, min · p. 5
Supply, most
5.5 V · VCC, recommended operating, max · p. 5
Supply, absolute maximum
6 V · VCC, absolute maximum · p. 5
Works from
-40 °C · Operating free-air temperature, min · p. 5
Works up to
85 °C · Operating free-air temperature, max · p. 5
Takes working
30 mA · VCC, 30 MHz data transfer, all outputs on, VO = 1 V, R(IREF) = 640 Ω, typical · p. 7
Takes at most
60 mA · VCC, 30 MHz data transfer, all outputs on, VO = 1 V, R(IREF) = 640 Ω, max · p. 7
Gives
60 mA · Constant sink current per channel, VCC < 3.6 V, max · p. 5
Gives
120 mA · Constant sink current per channel, VCC > 3.6 V, max · p. 5
Data rate, most
30 Mbit/s · Serial data shift rate, max · p. 5
Junction to air (PWP (HTSSOP))
36.7 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (PWP (HTSSOP))
15.9 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (PWP (HTSSOP))
18.9 K/W · Junction-to-case (top) thermal resistance · p. 6

Open-source boards using it

24See all 24
  • 4 layers307 × 46.1 mmStm32pe midi, the printed circuit board in 3D

    Stm32pe midi

    udu3324/stm32pe-midi

    a midi controller using the mpe protocol to create more expressive music

    136 parts35GPL-3.0
  • 4 layers239.5 × 239.5 mmBroadcast clock, the printed circuit board in 3D

    Broadcast clock

    espena/broadcast-clock

    Digital precision studio/broadcast masterclock with WiFi configuration, acts as local NTP server with accurate GPS time sync.

    440 parts28GPL-3.0
  • 2 layers64.8 × 109.2 mmDmx ledstrip dimmer-32ch, the printed circuit board in 3D

    Dmx ledstrip dimmer-32ch

    robinolejnik/dmx-ledstrip-dimmer-32ch

    Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.

    105 parts14MIT
  • 2 layers93 × 73.5 mmOne synapse electronic, the printed circuit board in 3D

    One synapse electronic

    RepRapLtd/AnalogueNeuralNet

    Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments

    141 parts8GPL-3.0
  • 2 layers203.2 × 82.6 mmDmxfire16, the printed circuit board in 3D

    Dmxfire16

    propane-and-electrons/dmxfire16

    16 channel RS-485 (DMX512 compatible) SSR.

    159 parts6
  • 2 layers203.2 × 82.6 mmWifire16, the printed circuit board in 3D

    Wifire16

    propane-and-electrons/wifire16

    16 channel Arduino-compatible wireless SSR.

    164 parts6
  • 4 layers193 × 121.9 mmLED Cube, the printed circuit board in 3D

    LED Cube

    c3n3/LEDCubed

    LED^3

    117 parts1
  • 2 layers111.6 × 67.3 mmEv19dashboardv1, the printed circuit board in 3D

    Ev19dashboardv1

    ASURacingTeam/EV19-Dashboard

    42 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TLC5940PWP?

Yes. The symbol is Driver_LED:TLC5940PWP and the footprint Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLC5940PWP?

HTSSOP-28-EP, with 29 pins. Its footprint is drawn on this page.

Where is the TLC5940PWP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC5940PWP?

JLCPCB lists it as part C1554243, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TLC5940PWP?

Parts like it in the library: the TLC5940PWPR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLC5940PWP?

24 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.