Skip to the content

TLC555IDRDL

Texas InstrumentsExtended

-40℃~+85℃ 1 100mA 170uA 3V~15V Reset function - 555 Timers / Counters ROHS

Part id
ti/TLC555IDRDL
Category
Timers, Counters
Pins
5
In stock
0 at JLCPCB (C6554082)
Used on
6 open-source boards

Overview

The TLC555IDRDL is a timers, Counter made by Texas Instruments with 5 pins. -40℃~+85℃ 1 100mA 170uA 3V~15V Reset function - 555 Timers / Counters ROHS.

JLCPCB lists it (part C6554082). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Open-source boards using it

6
  • 4 layers220 × 170 mmArpeggiator, the printed circuit board in 3D

    Arpeggiator

    EwoudVV/arpeggiator

    12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case

    360 parts3
  • 2 layers72.4 × 27.3 mmStimulus driver, the printed circuit board in 3D

    Stimulus driver

    flintwinters/electrode

    This repository contains a single INA333/OPA2192/TLC555/LM386M-1 sonifier schematic. The PCB retains its manual footprint placement and has a provisional two-layer signal route with one PGND net and thermal-relief pours…

    48 parts
  • 2 layers60 × 100 mmPiTrac Pi Connector, the printed circuit board in 3D

    PiTrac Pi Connector

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    98 parts439GPL-2.0
  • 2 layers56 × 36 mmPdlc, the printed circuit board in 3D

    Pdlc

    brown-studios/pdlc

    A circuit board for driving PDLC film from 12 V DC

    56 parts7MIT
  • 2 layers28.6 × 35.6 mmSimple switch, the printed circuit board in 3D

    Simple switch

    Connaxio/production-controller-makroshield

    The PCM has a mikroBUS socket that works with Espoir, our Power over Ethernet devboard, to provide remote control, as well as advanced functionalities through node-red and Home Assistant.

    30 parts
  • 2 layers46.7 × 30.9 mmUw rs485 hat, the printed circuit board in 3D

    Uw rs485 hat

    tomrodinger/Raspberry_Pi_HAT_RS485

    This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4

    48 partsApache-2.0

Questions

Where is the TLC555IDRDL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC555IDRDL?

JLCPCB lists it as part C6554082, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TLC555IDRDL?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.