TL494CNSR
Texas InstrumentsExtended
0℃~+70℃ 1kHz~300kHz 200mA 45% 7V~40V Isolation Over Current Protection、Soft Start Push-Pull SOIC-16-208mil AC-DC Controllers and Regulators ROHS
- Part id
- ti/TL494CNSR
- Category
- DC DC Converters
- Package
- SOIC-16-208mil
- Pins
- 16
- In stock
- 5,753 at JLCPCB (C163519)
Overview
The TL494CNSR is a DC DC Converter made by Texas Instruments in a SOIC-16-208mil package with 16 pins. 0℃~+70℃ 1kHz~300kHz 200mA 45% 7V~40V Isolation Over Current Protection、Soft Start Push-Pull SOIC-16-208mil AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Controller:TL494, from KiCad's library) and its footprint (digikey-footprints:DIP-16_W7.62mm, from Digikey), ready for a KiCad board. 5,753 are in stock at JLCPCB (part C163519).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | 1IN+ | Input |
| 2 | 1IN- | Input |
| 3 | FB | Output |
| 4 | DTC | Input |
| 5 | CT | Passive |
| 6 | RT | Passive |
| 7 | GND | Power in |
| 8 | C1 | Passive |
| 9 | E1 | Passive |
| 10 | E2 | Passive |
| 11 | C2 | Passive |
| 12 | VCC | Power in |
| 13 | OUTCTRL | Input |
| 14 | REF | Power out |
| 15 | 2IN- | Input |
| 16 | 2IN+ | Input |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the TL494CNSR?
Yes. The symbol is Regulator_Controller:TL494 and the footprint digikey-footprints:DIP-16_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TL494CNSR?
SOIC-16-208mil, with 16 pins. Its footprint is drawn on this page.
Where is the TL494CNSR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TL494CNSR?
JLCPCB lists it as part C163519, with 5,753 in stock; the sellers' links on this page open their listings.
What can replace the TL494CNSR?
Parts like it in the library: the HA16120FPJ-E by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.