Skip to the content
PCBKitNew board
TL082BCP on a board, in 3D

TL082BCP

Texas Instruments

-20V~-2.25V、2.25V~20V 0℃~+70℃ 100pA 105dB 18nV/√Hz@1kHz 1mV 1pA 2 20V/us 2uV/℃ 4.5V~40V 5.25MHz 960uA Short-Circuit Protection、EMI filtering/RF suppression PDIP-8 FET Input Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/TL082BCP
Category
FET Input Amplifiers
Package
PDIP-8
Pins
8

Overview

The TL082BCP is a FET Input Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -20V~-2.25V、2.25V~20V 0℃~+70℃ 100pA 105dB 18nV/√Hz@1kHz 1mV 1pA 2 20V/us 2uV/℃ 4.5V~40V 5.25MHz 960uA Short-Circuit Protection、EMI filtering/RF suppression PDIP-8 FET Input Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TL082, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 919 are in stock at JLCPCB (part C1346226). 1 open-source board in 1 repository on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:TL082From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

15
Common Mode Rejection Ratio(CMRR)
105dB
Dual Supply
2.25V~20V
Features
EMI filtering/RF suppression
Gain Bandwidth Product
5.25MHz
Ib - Input Bias Current
1pA
Input Offset Current(Ios)
100pA
Input Offset Voltage Drift(Vos TC)
2uV/℃
Noise density(eN)
18nV/√Hz@1kHz
Number of Channels
2
Operating Temperature
0℃~+70℃
Output Current
26mA
Quiescent Current(Iq)
960uA
Single Supply
4.5V~40V
Slew Rate
20V/us
Vos - Input Offset Voltage
1mV

Order codes

1

Pinout

8
The pins of the TL082BCP
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 1
  • 2 layers37.5 × 97.5 mmDouble gain, the printed circuit board in 3D

    Double gain

    Supermagnum/double-gain

    A small PCB that uses two TL082BCP op amps to amplify a signal from a contact microphone.

    39 parts10CC-BY-4.0

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TL082BCP" title="TL082BCP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TL082BCP.jpg" alt="TL082BCP" width="1200" height="900">
A picture that opens the part, for a README
[![TL082BCP](https://pcbkit.io/embed/parts/ti/TL082BCP.jpg?size=s)](https://pcbkit.io/parts/ti/TL082BCP)

Questions

Is there a KiCad symbol and footprint for the TL082BCP?

Yes. The symbol is Amplifier_Operational:TL082 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TL082BCP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the TL082BCP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TL082BCP?

JLCPCB lists it as part C1346226, with 919 in stock; the sellers' links on this page open their listings.

What can replace the TL082BCP?

Parts like it in the library: the TL072CN(LX) by lingxingic, the TL081CP(LX) by lingxingic, the TL081IP by Texas Instruments and the TLE2071CP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TL082BCP?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8