TL072CPWRE4

Texas InstrumentsExtended

-20V~-2.25V、2.25V~20V 0℃~+70℃ 100dB 100pA 10mV 18uV/℃ 2 2.5mA 200pA 20V/us 37nV/√Hz@1kHz 4.5V~40V 5.25MHz Short-Circuit Protection、EMI filtering/RF suppression TSSOP-8 FET Input Amplifiers ROHS

Datasheet JLCPCB LCSC

Part id: ti/TL072CPWRE4
Category: FET InputAmplifiers
Package: TSSOP-8
Pins: 8
In stock: 0 at JLCPCB (C2058887)

Overview

The TL072CPWRE4 is a FET InputAmplifier made by Texas Instruments in a TSSOP-8 package with 8 pins. -20V~-2.25V、2.25V~20V 0℃~+70℃ 100dB 100pA 10mV 18uV/℃ 2 2.5mA 200pA 20V/us 37nV/√Hz@1kHz 4.5V~40V 5.25MHz Short-Circuit Protection、EMI filtering/RF suppression TSSOP-8 FET Input Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TL072, from KiCad's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2058887).

Symbol

Amplifier_Operational:TL072From KiCad's library

Footprint

Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

Pinout

The pins of the TL072CPWRE4
Pin	Name	Type
1	—	Output
2	-	Input
3	+	Input
4	V-	Power in
5	+	Input
6	-	Input
7	—	Output
8	V+	Power in

Parameters

Common Mode Rejection Ratio(CMRR): 100dB
Dual Supply: 2.25V~20V；-20V~-2.25V
Features: Short-Circuit Protection；EMI filtering/RF suppression
Gain Bandwidth Product: 5.25MHz
Ib - Input Bias Current: 200pA
Input Offset Current(Ios): 100pA
Input Offset Voltage Drift(Vos TC): 18uV/℃
Noise density(eN): 37nV/√Hz@1kHz
Number of Channels: 2
Operating Temperature: 0℃~+70℃
Output Current: 26mA
Quiescent Current(Iq): 2.5mA
Single Supply: 4.5V~40V
Slew Rate: 20V/us
Vos - Input Offset Voltage: 10mV

Order codes

TL072CPWRE4LCSC C2058887

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/TL072CPWRE4" title="TL072CPWRE4 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Parts like it

TL062IPW
TSSOP-8-15V~15V -40℃~+85℃ 10uV/℃ 1MHz 2 200uA 3.5V/us 30pA 3mV 42nV/√Hz@1kHz 5pA 80dB Short-Circuit Protection、Built-in compensation、Latch-up suppression、EMI filtering/RF suppression TSSOP-8 FET Input Amplifiers ROHSTexas InstrumentsFET InputAmplifiers

Questions

Is there a KiCad symbol and footprint for the TL072CPWRE4?

Yes. The symbol is Amplifier_Operational:TL072 and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TL072CPWRE4?

TSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the TL072CPWRE4 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TL072CPWRE4?

JLCPCB lists it as part C2058887, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TL072CPWRE4?

Parts like it in the library: the TL062IPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.