Skip to the content
12345678

TCAN3413DDF

Texas InstrumentsExtended

-40℃~+125℃ 1 3V~3.6V 4uA 55mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection、Integrated level shifting、Hot-swap protection TSOT-23-8 CAN Transceivers ROHS

Part id
ti/TCAN3413DDF
Category
CAN Transceivers
Package
TSOT-23-8
Pins
8
In stock
14 at JLCPCB (C30111221)

Overview

The TCAN3413DDF is a CAN Transceiver made by Texas Instruments in a TSOT-23-8 package with 8 pins. -40℃~+125℃ 1 3V~3.6V 4uA 55mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection、Integrated level shifting、Hot-swap protection TSOT-23-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TCAN3404DRQ1, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TSOT-23-8, from KiCad's library), ready for a KiCad board. 14 are in stock at JLCPCB (part C30111221).

Symbol

1TXD2GND3VCC4RXD5SHDN/VIO6CANL7CANH8STB
EasyEDA_Cloud:TCAN3404DRQ1From EasyEDA

Footprint

12345678
Package_TO_SOT_SMD:TSOT-23-8From KiCad's library

From the datasheet

12
Supply, least
3 V · VCC, recommended operating min · p. 4
Supply, most
3.6 V · VCC, recommended operating max · p. 4
Supply, least
1.7 V · VIO, recommended operating min · p. 4
Supply, absolute maximum
6 V · VCC, absolute max · p. 4
Junction, hottest
165 °C · Junction temperature absolute max · p. 4
A pin gives at most
8 mA · RXD source or sink absolute max · p. 4
Takes working
42.13 mA · sum of VCC and VIO typical dominant currents, RL = 60 Ω, RXD floating · p. 5
Takes asleep
10 µA · sum of VCC and VIO typical standby currents · p. 5
Junction to air (DDF (SOT))
122.9 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DDF (SOT))
51.7 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DDF (SOT))
45.7 K/W · Junction-to-board thermal resistance · p. 4
Edge
10 ns · RXD output rise and fall time, typical; CL(RXD) = 15 pF · p. 10

What it is and has

9
Supply operation
3.3 V single supply · p. 1
CAN
Classical CAN and CAN FD at 2, 5, and 8 Mbps · p. 1
Receiver common mode input voltage
±30 V · p. 1
Bus fault protection
±58 V · p. 1
ESD protection
IEC ESD protection on bus pins: ±10 kV · p. 1
Protection
TXD-dominant time-out (DTO) · p. 1
Protection
Thermal-shutdown protection (TSD) · p. 1
Supply
3.3 V single supply operation · p. 1
CAN standard
ISO 11898-2:2016 physical layer · p. 1

Specifications

123
ParameterConditionsAs printedPage
Supply voltage VCCmin -0.3 · max 6 V4
Supply voltage I/O level shifter (only for TCAN3413) VIOTCAN3413min -0.3 · max 6 V4
CAN bus I/O voltage range on CANH and CANL VBUSmin -58 · max 58 V4
Max differential voltage between CANH and CANL VDIFFVDIFF = (CANH - CANL)min -58 · max 58 V4
Logic pin input voltage (TXD, STB, SHDN) VLogic_Inputmin -0.3 · max 6 V4
Logic output voltage range (RXD) VRXDmin -0.3 · max 6 V4
RXD output current IO(RXD)min -8 · max 8 mA4
Junction temperature TJmin -40 · max 165 °C4
Storage temperature TSTGmin -65 · max 150 °C4
Electrostatic discharge VESDHuman-body model (HBM), classification level 3A, all pins; ±4000 Vmax 4000 V4
Electrostatic discharge VESDHuman-body model (HBM), classification level 3B, CANH and CANL with respect to GND; ±10000 Vmax 10000 V4
Electrostatic discharge VESDCharged-device model (CDM), classification level C5, all pins; ±750 Vmax 750 V4
System level electrostatic discharge VESDCAN bus terminals (CANH, CANL) to GND, IEC61000-4-2; ±10000 Vmax 10000 V4
Supply voltage VCC3.3 V nominalmin 3 · max 3.6 V4
Supply voltage for I/O level shifter (only for TCAN3413) VIOTCAN3413min 1.7 · max 3.6 V4
RXD terminal high-level output current (only for TCAN3413) IOH(RXD)TCAN3413min -1.5 mA4
RXD terminal low-level output current (only for TCAN3413) IOL(RXD)TCAN3413max 1.5 mA4
Junction temperature TJmin -40 · max 150 °C4
Junction-to-ambient thermal resistance RΘJADDF (SOT)typ 122.9 ℃/W4
Junction-to-case (top) thermal resistance RΘJC(top)DDF (SOT)typ 51.7 ℃/W4
Junction-to-board thermal resistance RΘJBDDF (SOT)typ 45.7 ℃/W4
Junction-to-top characterization parameter ΨJTDDF (SOT)typ 1.3 ℃/W5
Junction-to-board characterization parameter ΨJBDDF (SOT)typ 45.4 ℃/W5
Supply current normal mode ICCDominant; TXD = 0 V, STB = 0 V, RL = 60 Ω, CL = open; See Figure 6-1typ 42 · max 55 mA5
Supply current normal mode ICCDominant; TXD = 0 V, STB = 0 V, RL = 50 Ω, CL = open; See Figure 6-1typ 50 · max 60 mA5
Supply current normal mode ICCRecessive; TXD = VCC, STB = 0 V, RL = 50 Ω, CL = open; See Figure 6-1typ 7 · max 8.2 mA5
Supply current normal mode ICCDominant with bus fault; TXD = 0 V, STB = 0 V, CANH = CANL = ±25 V, RL = open, CL = open; See Figure 6-1max 130 mA5
Supply current standby mode (TCAN3413) ICCTXD = STB = VIO, RL = 50 Ω, CL = open, TJ <= 85 °C; See Figure 6-1typ 1 · max 2 uA5
Supply current standby mode (TCAN3413) ICCTXD = STB = VIO, RL = 50 Ω, CL = open, TJ <= 125 °C; See Figure 6-1typ 1 · max 3 uA5
Supply current standby mode (TCAN3413) ICCTXD = STB = VIO, RL = 50 Ω, CL = open, TJ <= 150 °C; See Figure 6-1typ 1 · max 4 uA5
I/O supply current normal mode IIOTCAN3413; Dominant; TXD = 0 V, STB = 0 V, RL = 60 Ω, CL = open, RXD floatingtyp 125 · max 300 uA5
I/O supply current normal mode IIOTCAN3413; recessive; TXD = VIO, STB = 0 V, RL = 60 Ω, CL = open, RXD floatingtyp 19 · max 48 uA5
I/O supply current standby mode IIOTCAN3413; TXD = VIO, STB = VIO, RL = 60 Ω, CL = open, RXD floating, TJ <= 85 °Ctyp 9 · max 13 uA5
I/O supply current standby mode IIOTCAN3413; TXD = VIO, STB = VIO, RL = 60 Ω, CL = open, RXD floating, TJ <= 125 °Ctyp 9 · max 14 uA5
I/O supply current standby mode IIOTCAN3413; TXD = VIO, STB = VIO, RL = 60 Ω, CL = open, RXD floating, TJ <= 150 °Ctyp 9 · max 15 uA5
Undervoltage detection VCC rising UVCC(R)Ramp uptyp 2.75 · max 2.9 V5
Undervoltage detection on VCC falling UVCC(F)Ramp downmin 2.5 · typ 2.65 V5
Hysteresis voltage on UVCC VHYS(UVCC)typ 120 mV6
Undervoltage detection VIO rising (TCAN3413) UVIO(R)TCAN3413; Ramp uptyp 1.6 · max 1.65 V6
Undervoltage detection on VIO falling (TCAN3413) UVIO(F)TCAN3413; Ramp downmin 1.4 · typ 1.5 V6
Hysteresis voltage on UVIO VHYS(UVIO)typ 50 mV6
Average power dissipation Normal mode PDVCC = 3.3 V, TJ = 27°C, RL = 60Ω, CL_RXD = 15 pF; TXD input = 250 kHz 50% duty cycle square wavetyp 50 mW6
Average power dissipation Normal mode PDVCC = 3.6 V, TJ = 150°C, RL = 50Ω, CL_RXD = 15 pF; TXD input = 2.5 MHz 50% duty cycle square wavetyp 60 mW6
Thermal shutdown temperature TTSDtyp 192 °C6
Thermal shutdown hysteresis TTSD_HYStyp 10 °C6
Dominant output voltage normal mode VO(DOM)CANH; TXD = 0 V, STB, SHDN = 0 V, 50 Ω ≤ RL ≤ 65 Ω, CL = open; maximum VCCmin 2.25 V6
Dominant output voltage normal mode VO(DOM)CANL; TXD = 0 V, STB, SHDN = 0 V, 50 Ω ≤ RL ≤ 65 Ω, CL = openmin 0.5 · max 1.25 V6
Recessive output voltage normal mode VO(REC)CANH and CANL; TXD = VIO or VCC, STB, SHDN = 0 V, RL = open (no load), CL = openmin 1.5 · typ 1.9 · max 2.25 V6
Driver symmetry {(VO(CANH) + VO(CANL))/(VO(REC_CANH) + VO(REC_CANL)} VSYMTXD = 250 kHz, 1 MHz, 2.5 MHz, STB, SHDN = 0 V; RL = 60, CSPLIT = 4.7 nF, CL = openmin 0.9 · max 1.1 V/V6
DC output symmetry (CANHREC + CANLREC - CANHDOM - CANLDOM) VSYM_DCSTB, SHDN = 0 V; RL = 60 Ω, CL = openmin -400 · max 400 mV6
Differential output voltage normal mode Dominant VOD(DOM)CANH - CANL; TXD = 0 V, STB. SHDN = 0 V, 50 Ω ≤ RL ≤ 65 Ω, CL = openmin 1.5 · max 3 V6
Differential output voltage normal mode Dominant VOD(DOM)CANH - CANL; TXD = 0 V, STB, SHDN = 0 V, 45 Ω ≤ RL ≤ 70 Ω, CL = openmin 1.4 · max 3 V6
Differential output voltage normal mode Dominant VOD(DOM)CANH - CANL; TXD = 0 V, STB, SHDN = 0 V, RL = 2240 Ω, CL = openmin 1.5 · max 3.4 V6
Differential output voltage normal mode Recessive VOD(REC)CANH - CANL; TXD = VIO or VCC, STB, SHDN = 0 V, RL = 60 Ω, CL = openmin -120 · max 12 mV6
Differential output voltage normal mode Recessive VOD(REC)CANH - CANL; TXD = VIO or VCC, STB, SHDN = 0 V, RL = open, CL = openmin -50 · max 50 mV6
Bus output voltage standby mode VO(STB)CANH; TXD = STB = VIO or VCC, RL = open, CL = openmin -0.1 · max 0.1 V7
Bus output voltage standby mode VO(STB)CANL; TXD = STB = VIO or VCC, RL = open, CL = openmin -0.1 · max 0.1 V7
Bus output voltage standby mode VO(STB)CANH - CANL; TXD = STB = VIO or VCC, RL = open, CL = openmin -0.2 · max 0.2 V7
Short-circuit bus output current, dominant, normal mode IOS(DOM)V(CANH) = -15 V to 40 V, CANL = open, TXD = 0 V; See Figure 6-7 and Figure 7-3min -115 · max 115 mA7
Short-circuit bus output current, dominant, normal mode IOS(DOM)V(CAN_L) = -15 V to 40 V, CANH = open, TXD = 0 V; See Figure 6-7 and Figure 7-3min -115 · max 115 mA7
Short-circuit steady-state output current, recessive, normal mode IOS(REC)V(CANH) = -27 V to 32 V, CANL = open, STB=0, TXD = VIO or VCCmin -7 · max 7 mA7
Short-circuit steady-state output current, recessive, normal mode IOS(REC)V(CANL) = -27 V to 32 V, CANH = open, STB = 0, TXD = VIO or VCCmin -7 · max 7 mA7
Input threshold voltage normal mode VIT-30 V ≤ VCM ≤ 30 V, STB, SHDN= 0 V; See Figure 6-3 and Table 7-6min 500 · max 900 mV7
Input threshold standby mode, TCAN3413 VIT(STB)TCAN3413; VIO = 3 V to 3.6 V, -30 V ≤ VCM ≤ 30 V, STB= VIOmin 400 · max 1150 mV7
Input threshold standby mode, TCAN3413 VIT(STB)TCAN3413; VIO = 1.7 V to 1.9 V, 2.25 V to 2.75 V, -12 V ≤ VCM ≤ 12 V, STB= VIOmin 400 · max 1150 mV7
Normal mode dominant state differential input voltage range VDOM-30 V ≤ VCM ≤ 30 V, STB, SHDN= 0 Vmin 0.9 · max 9 V7
Normal mode recessive state differential input voltage range VREC-30 V ≤ VCM ≤ 30 V, STB, SHDN= 0 Vmin -4 · max 0.5 V7
Standby mode dominant state differential input voltage range VDOM(STB)SHDN= 0 V, STB = VIO, -30 V ≤ VCM ≤ 30 Vmin 1.15 · max 9 V7
Standby mode recessive state differential input voltage range VREC(STB)SHDN = 0 V, STB = VIO, -30 V ≤ VCM ≤ 30 Vmin -4 · max 0.4 V7
Hysteresis voltage for input threshold normal mode VHYS-30 V ≤ VCM ≤ 30 V, STB, SHDN= 0 Vtyp 50 mV7
Common mode range normal and standby modes VCMSee Figure 6-3 and Table 7-6min -30 · max 30 V7
Unpowered bus input leakage current ILKG(IOFF)CANH = CANL = 5 V, VCC = VIO = GNDmax 5 uA7
Input capacitance to ground (CANH or CANL) CITXD = VIOmax 40 pF7
Differential input capacitance CIDTXD = VIOmax 20 pF7
Differential input resistance RIDTXD = VIO, STB = 0 V -30 V ≤ VCM ≤ 30 Vmin 25 · max 50 kΩ7
Single ended input resistance (CANH or CANL) RINTXD = VIO, STB = 0 V -30 V ≤ VCM ≤ 30 Vmin 13 · max 25 kΩ7
Input resistance matching [1 – (RIN(CANH) / RIN(CANL))] × 100 % RIN(M)V(CAN_H) = V(CAN_L) = 5 Vmin -3 · max 3 %7
High-level input leakage current IIHTXD = VCC = VIO = 3.6 Vmin -2.5 · typ 0 · max 1 uA7
Low-level input leakage current IILTXD = 0 V, VCC = VIO = 3.6 Vmin -200 · typ -100 · max -20 uA7
Unpowered leakage current ILKG(OFF)TXD = 3.6 V, VCC = VIO = 0 Vmin -1 · typ 0 · max 1 uA7
Input capacitance CItyp 4 pF8
Unpowered leakage current ILKG(OFF)RXD = 3.6 V, VCC = VIO = 0 Vmin -1 · typ 0 · max 1 uA8
High-level input leakage current IIHSTB terminal; VCC = VIO = STB = 3.6 Vmin -2 · max 2 uA8
Low-level input leakage current IILSTB terminal; VCC = VIO = 3.6 V, STB = 0 Vmin -20 · max -2 uA8
Unpowered leakage current ILKG(OFF)STB = 3.6V, VCC= VIO = 0 Vmin -1 · typ 0 · max 1 uA8
Total loop delay, driver input (TXD) to receiver output (RXD), recessive to dominant tPROP(LOOP1)TCAN3413; See Figure 6-4, normal mode, VCC = VIO = 3 V to 3.6 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 95 · max 180 ns8
Total loop delay, driver input (TXD) to receiver output (RXD), recessive to dominant tPROP(LOOP1)TCAN3413; See Figure 6-4, normal mode, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 102 · max 190 ns8
Total loop delay, driver input (TXD) to receiver output (RXD), recessive to dominant tPROP(LOOP1)TCAN3413; See Figure 6-4, normal mode, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 115 · max 210 ns8
Total loop delay, driver input (TXD) to receiver output (RXD), dominant to recessive tPROP(LOOP2)TCAN3413; See Figure 6-4, normal mode, VCC = VIO = 3 V to 3.6 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 120 · max 180 ns8
Total loop delay, driver input (TXD) to receiver output (RXD), dominant to recessive tPROP(LOOP2)TCAN3413; See Figure 6-4, normal mode, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 125 · max 190 ns8
Total loop delay, driver input (TXD) to receiver output (RXD), dominant to recessive tPROP(LOOP2)TCAN3413; See Figure 6-4, normal mode, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFtyp 140 · max 210 ns8
Mode change time, from normal to standby or from standby to normal tMODESee Figure 6-5max 30 us9
Filter time for a valid wake-up pattern tWK_FILTERSee Figure 7-5min 0.5 · max 1.8 us9
Bus wake-up timeout value tWK_TIMEOUTSee Figure 7-5min 0.8 · max 6 ms9
Time duration after VCC or VIO hass cleared UV+, and device can resume normal operation Tstartupmax 1.5 ms9
Filter on STB pin to filter out any glitches Tfilter(STB)min 0.5 · typ 1 · max 2 us9
Propagation delay time, low-to-high TXD edge to driver recessive (dominant to recessive) tprop(TxD-busrec)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = VIO = 3 V to 3.6 Vtyp 65 · max 100 ns9
Propagation delay time, low-to-high TXD edge to driver recessive (dominant to recessive) tprop(TxD-busrec)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 Vtyp 67 · max 110 ns9
Propagation delay time, low-to-high TXD edge to driver recessive (dominant to recessive) tprop(TxD-busrec)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 Vtyp 71 · max 110 ns9
Propagation delay time, high-to-low TXD edge to driver dominant (recessive to dominant) tprop(TxD-busdom)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = VIO = 3 V to 3.6 Vtyp 46 · max 100 ns9
Propagation delay time, high-to-low TXD edge to driver dominant (recessive to dominant) tprop(TxD-busdom)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 Vtyp 48 · max 110 ns9
Propagation delay time, high-to-low TXD edge to driver dominant (recessive to dominant) tprop(TxD-busdom)TCAN3413; See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 Vtyp 53 · max 110 ns9
Pulse skew (|tprop(TxD-busrec) - tprop(TxD-busdom)|) tsk(p)See Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pFtyp 18 · max 28 ns9
Differential output signal rise time tRSee Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pFtyp 32 · max 57 ns9
Differential output signal fall time tFSee Figure 6-2, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pFtyp 30 · max 50 ns9
Dominant timeout tTXD_DTOSee Figure 6-6, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pFmin 1.2 · max 4 ms9
Propagation delay time, bus recessive input to RXD high output (dominant to recessive) tprop(busrec-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = VIO = 3 V to 3.6 Vtyp 55 · max 90 ns9
Propagation delay time, bus recessive input to RXD high output (dominant to recessive) tprop(busrec-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 Vtyp 60 · max 90 ns9
Propagation delay time, bus recessive input to RXD high output (dominant to recessive) tprop(busrec-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 Vtyp 70 · max 102 ns9
Propagation delay time, bus dominant input to RXD low output (recessive to dominant) tprop(busdom-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = VIO = 3 V to 3.6 Vtyp 45 · max 90 ns10
Propagation delay time, bus dominant input to RXD low output (recessive to dominant) tprop(busdom-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = 3 to 3.6 V, VIO = 2.25 V to 2.75 Vtyp 51 · max 90 ns10
Propagation delay time, bus dominant input to RXD low output (recessive to dominant) tprop(busdom-RXD)TCAN3413; See Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pF, VCC = 3 to 3.6 V, VIO = 1.71 V to 1.89 Vtyp 60 · max 100 ns10
RXD output signal rise time tRSee Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pFtyp 10 · max 25 ns10
RXD output signal fall time tFSee Figure 6-3, STB, SHDN = 0 V, CL(RXD) = 15 pFtyp 10 · max 28 ns10
Bit time on CAN bus output pins with tBIT(TXD) = 500 ns tBIT(BUS)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFmin 450 · max 525 ns10
Bit time on CAN bus output pins with tBIT(TXD) = 200 ns tBIT(BUS)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFmin 160 · max 205 ns10
Bit time on CAN bus output pins with tBIT(TXD) = 125 ns(1) tBIT(BUS)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF; Min/Max limits based on characterizationmin 85 · max 130 ns10
Bit time on RXD output pins with tBIT(TXD) = 500 ns tBIT(RXD)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFmin 410 · max 540 ns10
Bit time on RXD output pins with tBIT(TXD) = 200 ns tBIT(RXD)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pFmin 130 · max 210 ns10
Bit time on RXD output pins with tBIT(TXD) = 125 ns(1) tBIT(RXD)See Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF; Min/Max limits based on characterizationmin 75 · max 135 ns10
Receiver timing symmetry with tBIT(TXD) = 500 ns ΔtRECSee Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF; ΔtREC = tBIT(RXD) - tBIT(BUS)min -50 · max 20 ns10
Receiver timing symmetry with tBIT(TXD) = 200 ns ΔtRECSee Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF; ΔtREC = tBIT(RXD) - tBIT(BUS)min -40 · max 10 ns10
Receiver timing symmetry with tBIT(TXD) = 125 ns(1) ΔtRECSee Figure 6-4, STB, SHDN = 0 V, RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF; ΔtREC = tBIT(RXD) - tBIT(BUS); Min/Max limits based on characterizationmin -40 · max 10 ns10

Pins, by the datasheet

8
1 TXD
CAN transmit data input; integrated pull-up. · p. 3
2 GND
Ground connection. · p. 3
3 VCC
3.3 V supply voltage. · p. 3
4 RXD
CAN receive data output, tri-stated when device powered off. · p. 3
5 VIO
I/O supply voltage (TCAN3413 only). · p. 3
6 CANL
Low-level CAN bus input/output line. · p. 3
7 CANH
High-level CAN bus input/output line. · p. 3
8 STB
Standby input for mode control; integrated pull-up. · p. 3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TCAN3413DDF?

Yes. The symbol is EasyEDA_Cloud:TCAN3404DRQ1 and the footprint Package_TO_SOT_SMD:TSOT-23-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TCAN3413DDF?

TSOT-23-8, with 8 pins. Its footprint is drawn on this page.

Where is the TCAN3413DDF datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TCAN3413DDF?

JLCPCB lists it as part C30111221, with 14 in stock; the sellers' links on this page open their listings.

What can replace the TCAN3413DDF?

Parts like it in the library: the MAX3051EKA+T by Maxim Integrated (Analog Devices), the TCAN332GDCN by Texas Instruments, the TCAN330GDCN by Texas Instruments and the TCAN334GDCN by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.