SNJ5472J
Texas InstrumentsExtended
- Flip Flops ROHS
- Part id
- ti/SNJ5472J
- Category
- Flip Flops
- Pins
- 5
- In stock
- 0 at JLCPCB (C3827077)
Overview
The SNJ5472J is a flip Flop made by Texas Instruments with 14 pins. - Flip Flops ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SN74H102N, from EasyEDA) and its footprint (EasyEDA_Cloud:CDIP-14_L20.0-W6.8-P2.54-LS7.8-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3827077).
Symbol
Footprint
Pinout
14| Pin | Name | Type |
|---|---|---|
| 1 | NC | Unspecified |
| 2 | CLR# | Unspecified |
| 3 | J1 | Unspecified |
| 4 | J2 | Unspecified |
| 5 | J3 | Unspecified |
| 6 | Q# | Unspecified |
| 7 | GND | Unspecified |
| 8 | Q | Unspecified |
| 9 | K1 | Unspecified |
| 10 | K2 | Unspecified |
| 11 | K3 | Unspecified |
| 12 | CLK | Unspecified |
| 13 | PRE# | Unspecified |
| 14 | VCC | Unspecified |
Parts like it
85962-8752501MCA
CDIP-14-55℃~+125℃ 145MHz 1ns 24mA 24mA 2uA 3.5ns 3pF 4.5V~5.5V 54ACT Series 7.5ns D-Type Rising Edge Set and Reset CDIP-14 Flip FlopsTexas InstrumentsFlip FlopsCD54AC74F3A
CDIP-14-55℃~+125℃ 0ns 1.5V~5.5V 10pF 125MHz 2.5ns@5V,50pF 24mA 24mA 3.5ns 4uA D-Type Rising Edge Set and Reset CDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsCD54HC74F3A
CDIP-14-55℃~+125℃ 1 10pF 13ns 17ns@6V,15pF 2 2V~6V 35MHz 3ns 5.2mA 5.2mA 54HC Series Asynchronous D-Type Push-Pull Rising Edge Set and Reset CDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSNJ54F74J
CDIP-14-55℃~+125℃ 1mA 1ns 2 20mA 2ns 4.5V~5.5V 4.9ns@5V,50pF 54F Series 80MHz D-Type Rising Edge Set and Reset CDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSNJ54H102J
--55℃~+125℃ 10ns、13ns 15ns@5V,25pF 20mA 4.5V~5.5V 500uA 50MHz 54Series Asynchronous Falling Edge JK-Type Set and Reset - Flip Flops ROHSRochester Electronics, LLCFlip Flops5962-8515401CA
CDIP-14-55℃~+125℃ 1 10pF 14ns@5V,15pF 2 20ns 2V~6V 3ns 4mA 4uA 5.2mA 54HC Series 60MHz Asynchronous Complementary type Falling Edge JK-Type Reset CDIP-14 Flip Flops ROHSTexas InstrumentsFlip Flops5962-8852001CA
CDIP-14-55℃~+125℃ 1 10ns@5V,50pF 160MHz 2 24mA 24mA 2V~6V 2uA 3pF 54AC Series D-Type Rising Edge Set and Reset CDIP-14 Flip FlopsTexas InstrumentsFlip Flops5962-9686001QCA
CDIP-14-55℃~+125℃ 1 10pF 110MHz 2 2V~5.5V 2uA 500ps 54AHCSeries 5ns 8.5ns@5V,50pF 8mA 8mA Asynchronous D-Type Rising Edge Set and Reset CDIP-14 Flip Flops ROHSTexas InstrumentsFlip Flops
Questions
Is there a KiCad symbol and footprint for the SNJ5472J?
Yes. The symbol is EasyEDA_Cloud:SN74H102N and the footprint EasyEDA_Cloud:CDIP-14_L20.0-W6.8-P2.54-LS7.8-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the SNJ5472J datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SNJ5472J?
JLCPCB lists it as part C3827077, with 0 in stock; the sellers' links on this page open their listings.
What can replace the SNJ5472J?
Parts like it in the library: the 5962-8752501MCA by Texas Instruments, the CD54AC74F3A by Texas Instruments, the CD54HC74F3A by Texas Instruments and the SNJ54F74J by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.