Skip to the content
12345678

SN74LVC2G66DCU

Texas InstrumentsExtended

-40℃~+85℃ 1.65V~5.5V 10.5ns 14pF 175MHz 1:1 2 3.9ns 6Ω 800ps VSSOP-8-0.5mm Analog Switches, Multiplexers ROHS

Part id
ti/SN74LVC2G66DCU
Category
Analog Switches, Multiplexers
Package
VSSOP-8-0.5mm
Pins
8
In stock
112 at JLCPCB (C181970)
Used on
1 open-source board

Overview

The SN74LVC2G66DCU is an analog Switches, Multiplexer made by Texas Instruments in a VSSOP-8-0.5mm package with 8 pins. -40℃~+85℃ 1.65V~5.5V 10.5ns 14pF 175MHz 1:1 2 3.9ns 6Ω 800ps VSSOP-8-0.5mm Analog Switches, Multiplexers ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC2G66, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 112 are in stock at JLCPCB (part C181970). 1 open-source board in 1 repository on GitHub use it.

Symbol

127
74xGxx:74LVC2G66From KiCad's library

Footprint

12345678
Package_SO:VSSOP-8_2.3x2mm_P0.5mmFrom KiCad's library

From the datasheet

10
Supply, least
1.65 V · VCC, recommended operating min · p. 4
Supply, most
5.5 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Takes working
10 µA · VCC supply current max, VCC = 5.5 V, VC = VCC or GND · p. 5
A pin gives at most
50 mA · On-state switch current absolute max magnitude, VI/O = 0 to VCC · p. 4
Junction to air (DCU (VSSOP))
204.4 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (DCU (VSSOP))
77 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (DCU (VSSOP))
83.2 K/W · Junction-to-board thermal resistance · p. 5

What it is and has

6
Switch configuration
Dual bilateral analog switch · p. 1
Supply operation
1.65 V to 5.5 V VCC · p. 1
Input voltage tolerance
5.5 V · p. 1
Input/output range
Rail-to-rail · p. 1
Linearity
High degree of linearity · p. 1
Package
VSSOP (8), 2.30 mm × 2.00 mm · p. 1

Around it

1
cap 0.1-μF
between VCC and GND; Bypass capacitor for the single supply; install as close to the power terminal as possible. · p. 15

Specifications

83
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage VIOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Switch I/O voltage VOMaximum is VCC + 0.5 V, limited to 5.5 V by footnote (4)min -0.5 V4
Control input clamp current IIKVI < 0max -50 mA4
I/O port diode current II/OKVI/O < 0 or VI/O > VCCmax -50 mA4
On-state switch current ITVI/O = 0 to VCC; ± limitmax 50 mA4
Continuous current through VCC or GND± limitmax 100 mA4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± ratingmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101, all pins; ± ratingmax 1000 V4
Supply voltage VCCmin 1.65 · max 5.5 V4
I/O port voltage VI/OMaximum = VCCmin 0 V4
Control input voltage VImin 0 · max 5.5 V4
Input transition rise or fall time Δt/ΔvVCC = 1.65 V to 1.95 Vmax 20 ns/V4
Input transition rise or fall time Δt/ΔvVCC = 2.3 V to 2.7 Vmax 20 ns/V4
Input transition rise or fall time Δt/ΔvVCC = 3 V to 3.6 Vmax 10 ns/V4
Input transition rise or fall time Δt/ΔvVCC = 4.5 V to 5.5 Vmax 10 ns/V4
Operating free-air temperature TAmin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJADCU (VSSOP), 8 pinstyp 204.4 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DCU (VSSOP), 8 pinstyp 77 °C/W5
Junction-to-board thermal resistance RθJBDCU (VSSOP), 8 pinstyp 83.2 °C/W5
Junction-to-top characterization parameter ψJTDCU (VSSOP), 8 pinstyp 7.1 °C/W5
Junction-to-board characterization parameter ψJBDCU (VSSOP), 8 pinstyp 82.7 °C/W5
ON-state switch resistance ronVI = VCC or GND, VC = VIH; IS = 4 mA; VCC = 1.65 V; typical at TA = 25°Ctyp 12.5 · max 30 Ω5
ON-state switch resistance ronVI = VCC or GND, VC = VIH; IS = 8 mA; VCC = 2.3 V; typical at TA = 25°Ctyp 9 · max 20 Ω5
ON-state switch resistance ronVI = VCC or GND, VC = VIH; IS = 24 mA; VCC = 3 V; typical at TA = 25°Ctyp 7.5 · max 15 Ω5
ON-state switch resistance ronVI = VCC or GND, VC = VIH; IS = 32 mA; VCC = 4.5 V; typical at TA = 25°Ctyp 6 · max 10 Ω5
Peak ON-state resistance ron(p)VI = VCC to GND, VC = VIH; IS = 4 mA; VCC = 1.65 V; TA = 25°Ctyp 85 · max 120 Ω5
Peak ON-state resistance ron(p)VI = VCC to GND, VC = VIH; IS = 8 mA; VCC = 2.3 V; TA = 25°Ctyp 22 · max 30 Ω5
Peak ON-state resistance ron(p)VI = VCC to GND, VC = VIH; IS = 24 mA; VCC = 3 V; typical at TA = 25°Ctyp 12 · max 20 Ω5
Peak ON-state resistance ron(p)VI = VCC to GND, VC = VIH; IS = 32 mA; VCC = 4.5 V; typical at TA = 25°Ctyp 7.5 · max 15 Ω5
Difference of ON-state resistance between switches ΔronVI = VCC to GND, VC = VIH; IS = 4 mA; VCC = 1.65 Vmax 7 Ω5
Difference of ON-state resistance between switches ΔronVI = VCC to GND, VC = VIH; IS = 8 mA; VCC = 2.3 Vmax 5 Ω5
Difference of ON-state resistance between switches ΔronVI = VCC to GND, VC = VIH; IS = 24 mA; VCC = 3 Vmax 3 Ω5
Difference of ON-state resistance between switches ΔronVI = VCC to GND, VC = VIH; IS = 32 mA; VCC = 4.5 Vmax 2 Ω5
OFF-state switch leakage current IS(off)VI = VCC and VO = GND or VI = GND and VO = VCC; VC = VIL; VCC = 5.5 V; ± limitmax 1 uA5
OFF-state switch leakage current IS(off)VI = VCC and VO = GND or VI = GND and VO = VCC; VC = VIL; VCC = 5.5 V; TA = 25°C; ± limitmax 0.1 uA5
ON-state switch leakage current IS(on)VI = VCC or GND, VC = VIH, VO = Open; VCC = 5.5 V; ± limitmax 1 uA5
ON-state switch leakage current IS(on)VI = VCC or GND, VC = VIH, VO = Open; VCC = 5.5 V; TA = 25°C; ± limitmax 0.1 uA5
Control input current IIVC = VCC or GND; VCC = 5.5 V; ± limitmax 1 uA5
Control input current IIVC = VCC or GND; VCC = 5.5 V; TA = 25°C; ± limitmax 0.1 uA5
Supply current ICCVC = VCC or GND; VCC = 5.5 Vmax 10 uA5
Supply current ICCVC = VCC or GND; VCC = 5.5 V; TA = 25°Cmax 1 uA5
Supply-current change ΔICCVC = VCC – 0.6 V; VCC = 5.5 Vmax 500 uA5
Control input capacitance CicVCC = 5 V; TA = 25°Ctyp 3.5 pF5
Switch input / output capacitance Cio(off)VCC = 5 V; TA = 25°Ctyp 6 pF5
Switch input / output capacitance Cio(on)VCC = 5 V; TA = 25°Ctyp 14 pF5
tpd tpdA or B to B or A; VCC = 1.8 V ± 0.15 V; over recommended operating free-air temperature rangemax 2 ns6
tpd tpdA or B to B or A; VCC = 2.5 V ± 0.2 V; over recommended operating free-air temperature rangemax 1.2 ns6
tpd tpdA or B to B or A; VCC = 3.3 V ± 0.3 V; over recommended operating free-air temperature rangemax 0.8 ns6
tpd tpdA or B to B or A; VCC = 5 V ± 0.5 V; over recommended operating free-air temperature rangemax 0.6 ns6
ten tenC to A or B; VCC = 1.8 V ± 0.15 V; over recommended operating free-air temperature rangemin 2.3 · max 10 ns6
ten tenC to A or B; VCC = 2.5 V ± 0.2 V; over recommended operating free-air temperature rangemin 1.6 · max 5.6 ns6
ten tenC to A or B; VCC = 3.3 V ± 0.3 V; over recommended operating free-air temperature rangemin 1.5 · max 4.4 ns6
ten tenC to A or B; VCC = 5 V ± 0.5 V; over recommended operating free-air temperature rangemin 1.3 · max 3.9 ns6
tdis tdisC to A or B; VCC = 1.8 V ± 0.15 V; over recommended operating free-air temperature rangemin 2.5 · max 10.5 ns6
tdis tdisC to A or B; VCC = 2.5 V ± 0.2 V; over recommended operating free-air temperature rangemin 1.2 · max 6.9 ns6
tdis tdisC to A or B; VCC = 3.3 V ± 0.3 V; over recommended operating free-air temperature rangemin 2 · max 7.2 ns6
tdis tdisC to A or B; VCC = 5 V ± 0.5 V; over recommended operating free-air temperature rangemin 1.1 · max 6.3 ns6
Frequency response (switch on)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = sine wave; VCC = 1.65 Vtyp 35 MHz6
Frequency response (switch on)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = sine wave; VCC = 2.3 Vtyp 120 MHz6
Frequency response (switch on)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = sine wave; VCC = 3 Vtyp 175 MHz6
Frequency response (switch on)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = sine wave; VCC = 4.5 Vtyp 195 MHz6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 1.65 V; adjust fin voltage to obtain 0 dBm at inputtyp -58 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 2.3 V; adjust fin voltage to obtain 0 dBm at inputtyp -58 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 3 V; adjust fin voltage to obtain 0 dBm at inputtyp -58 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 4.5 V; adjust fin voltage to obtain 0 dBm at inputtyp -58 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 1.65 V; adjust fin voltage to obtain 0 dBm at inputtyp -42 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 2.3 V; adjust fin voltage to obtain 0 dBm at inputtyp -42 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 3 V; adjust fin voltage to obtain 0 dBm at inputtyp -42 dB6
Crosstalk (between switches)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 4.5 V; adjust fin voltage to obtain 0 dBm at inputtyp -42 dB6
Crosstalk (control input to signal output)TA = 25°C; C to A or B; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (square wave); VCC = 1.65 Vtyp 35 mV6
Crosstalk (control input to signal output)TA = 25°C; C to A or B; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (square wave); VCC = 2.3 Vtyp 50 mV6
Crosstalk (control input to signal output)TA = 25°C; C to A or B; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (square wave); VCC = 3 Vtyp 70 mV6
Crosstalk (control input to signal output)TA = 25°C; C to A or B; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (square wave); VCC = 4.5 Vtyp 100 mV6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 1.65 Vtyp -58 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 2.3 Vtyp -58 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 3 Vtyp -58 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 50 pF, RL = 600 Ω, fin = 1 MHz (sine wave); VCC = 4.5 Vtyp -58 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 1.65 Vtyp -42 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 2.3 Vtyp -42 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 3 Vtyp -42 dB6
Feedthrough attenuation (switch off)TA = 25°C; A or B to B or A; CL = 5 pF, RL = 50 Ω, fin = 1 MHz (sine wave); VCC = 4.5 Vtyp -42 dB6

Pins, by the datasheet

8
1 1A
Bidirectional signal to be switched. · p. 3
2 1B
Bidirectional signal to be switched. · p. 3
3 2C
Controls the switch (L = OFF, H = ON). · p. 3
4 GND
Ground pin. · p. 3
5 2A
Bidirectional signal to be switched. · p. 3
6 2B
Bidirectional signal to be switched. · p. 3
7 1C
Controls the switch (L = OFF, H = ON). · p. 3
8 VCC
Power pin. · p. 3

Ordering codes, by the datasheet

8
SN74LVC2G66DCUR
VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU | SN lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCUR.A
VSSOP (DCU), 8 pins · 3000, LARGE T&R; SN lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCUR.B
VSSOP (DCU), 8 pins · 3000, LARGE T&R; SN lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCURG4
VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCURG4.B
VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCUTE4
VSSOP (DCU), 8 pins · 250, SMALL T&R; NIPDAU lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCUTG4
VSSOP (DCU), 8 pins · 250, SMALL T&R; NIPDAU lead finish; -40 to 85 °C · p. 18
SN74LVC2G66DCUTG4.B
VSSOP (DCU), 8 pins · 250, SMALL T&R; NIPDAU lead finish; -40 to 85 °C · p. 18

Open-source boards using it

1
  • 4 layers30 × 20 mmSwd switch, the printed circuit board in 3D

    Swd switch

    alvarop/debugotron

    Debugotron is a collection of debugging/automation tools I've wanted in the past but didn't have access to. Currently, the tools include:

    28 parts52BSD-3-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC2G66DCU?

Yes. The symbol is 74xGxx:74LVC2G66 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC2G66DCU?

VSSOP-8-0.5mm, with 8 pins. Its footprint is drawn on this page.

Where is the SN74LVC2G66DCU datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC2G66DCU?

JLCPCB lists it as part C181970, with 112 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC2G66DCU?

Parts like it in the library: the TS5A3359DCU by Texas Instruments, the TS5A23166DCU by Texas Instruments, the TS5A3154DCU by Texas Instruments and the TS5A23167DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC2G66DCU?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.